p.780
p.786
p.793
p.799
p.805
p.813
p.819
p.823
p.829
Effect of Random Defects on Dynamic Response of Honeycomb Structures
Abstract:
The dynamic crushing behavior of cellular metals is closely related to their microstructure. Two types of random defects by randomly thickening/removing cell walls are investigated in this paper. Their influences on the deformation modes and plateau stresses of honeycombs are studied by finite element simulation using ABAQUS/Explicit code. Three deformation modes, i.e. the Homogeneous Mode, the Transitional Mode and the Shock Mode, are used to distinguish the deformation patterns of honeycombs under different impact velocities. The critical impact velocity for mode transition between the Homogeneous and Transitional modes is quantitatively determined by evaluating a stress uniformity index, defined as the ratio between the plateau stresses on the support and impact surfaces. It is found that the critical impact velocity decreases with increasing thickening ratio but increases with increasing removing ratio. The plateau stress on the impact surface heavily depends on the impact velocity due to the inertia effect. The random defects lead to a weakening effect on the plateau stress. For the honeycombs with randomly removing cell walls, the weakening effect is especially obvious at a moderate impact velocity. For the honeycombs with randomly thickening cell walls, the weakening effect is particularly severe at a low impact velocity, but this effect almost disappears when the impact velocity is high enough.
Info:
Periodical:
Pages:
805-810
Citation:
Online since:
January 2012
Authors:
Price:
Permissions: