A Study of the Behavior of Phosphatic Concentrate in Gas Filtration Cake Formation

Article Preview

Abstract:

The purpose of this study was to investigate the porosity behavior of dust cakes formed by phosphatic concentrate along filtration time. Filtration trials were performed for four different pressure drops. The fabric filter used as filter medium was a polyester felt. The dust cakes obtained were submitted to a hardening process and their images were acquired with the use of a SEM. The images generated by the SEM were analyzed by using an image analyzing program that supplied the cake porosity values. Porosity values were also estimated using Ergun’s modified equation. Results show that porosity presents higher values when calculated using the image analyzing program, but has the same behavior as the results found with Ergun’s equation. It was also observed that porosity is not constant during filtration; therefore it can be concluded that the dust cake is compressible.

You might also be interested in these eBooks

Info:

Periodical:

Materials Science Forum (Volumes 660-661)

Pages:

1075-1080

Citation:

Online since:

October 2010

Export:

Price:

[1] Y. S. Chen and S. S. Hsiau: Powder Technology Vol. 192 (2) (2009), p.217.

Google Scholar

[2] L. X. Ito and M. L. Aguiar: Brazilian Journal of Chemical Engineering Vol. 26 (2) (2009).

Google Scholar

[3] J. R. Coury: Electrostatic effects in granular bed filtration of gases. PhD (Thesis) Cambridge 1983. England.

Google Scholar

[4] M. L. Aguiar: Filtração de gases em filtros de tecido: deposição e remoção da camada de pó formada. Doutorado (Tese). São Carlos, 1995. UFSCar -SP.

Google Scholar

[5] C.J. Tsai and Y.H. Cheng: Aerosol Science and Technology Vol. 29 (1998), p.315.

Google Scholar

[6] A.Y. AL-Otoom: Atmospheric Environment Vol. n39 (2005), p.51.

Google Scholar

[7] Negrini, V.S.; Martins, J.C.; Coury, J.R. and Aguiar, M.L. Determinação da porosidade de tortas de filtração de gases em função da velocidade superficial de filtração. In: XXVIII ENEMP. (2000), p.191.

DOI: 10.14393/ufu.di.2011.122

Google Scholar

[8] M. L. Aguiar and J. R. Coury: Industrial & Engineering Chemistry Research Vol. 35 (1996), p.3673.

Google Scholar

[9] S. Ergun: Chemical Engineering Progress Vol. 48 (2) (1952), p.89.

Google Scholar