Formation of Grain Boundary Misorientation Spectrum in Alpha-Beta Titanium Alloys with Lamellar Structure under Warm and Hot Working

Gennady A. Salishchev; S.V. Zerebtsov; S.Yu. Mironov; S. Lee Semiatin

doi:10.4028/www.scientific.net/MSF.467-470.501

Paper Titles

Recrystallization Behaviour of Two Magnesium Alloys
p.477

Magnetically Controlled Recrystallization Texture in Titanium
p.483

Structure Evolution of Zirconium Alloys during Deformation/Heat Treatment
p.489

Microstructure and Texture Development during Recrystallization of Rolled Molybdenum Sheets
p.495

Formation of Grain Boundary Misorientation Spectrum in Alpha-Beta Titanium Alloys with Lamellar Structure under Warm and Hot Working
p.501

In-Grain and Grain-to-Grain Textural Inhomogeneities in Coarse-Grained Tantalum
p.507

Microstructural Path of Recrystallization in an Electron Beam Melted Ta-10wt% Alloy
p.513

An EBSD Study on Orientation Effects during Recrystallization of Coarse-Grained Niobium
p.519

Recrystallization of Iron Aluminides
p.525

HomeMaterials Science ForumMaterials Science Forum Vols. 467-470Formation of Grain Boundary Misorientation...

Formation of Grain Boundary Misorientation Spectrum in Alpha-Beta Titanium Alloys with Lamellar Structure under Warm and Hot Working

Abstract:

Microstructure evolution in alpha-beta Ti-64 alloy samples with lamellar structure deformed to a height reduction of 70% at temperatures between 450 and 800°C has been investigated. The deformation led to a distinctly globularized structure of α- and β-phase in the whole temperature interval. The dependence of globular grain size on deformation temperature is of a linear character up to the temperature of warm deformation at which formation of an SMC structure takes place. Continuous recrystallization was observed in the α-and β-phases. Different types of defects responsible for splitting of α-lamellae such as low and high angle boundaries, shear bands and twins were found. An investigation of boundary misorientation spectra in the α-and β-phases deformed to different strains at 550 and 800°C was carried out. Typical boundary misorientation spectra for single phase metals with the same lattice were obtained. The boundary misorientation spectrum depends weakly on strain and deformation temperature. The results of this study show the importance of transformation of semi-coherent interphase boundaries to non-coherent ones for globularization of lamellar microstructures.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Materials Science Forum (Volumes 467-470)

Pages:

501-506

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.467-470.501

Citation:

Cite this paper

Online since:

October 2004

Authors:

Gennady A. Salishchev, S.V. Zerebtsov, S.Yu. Mironov, S. Lee Semiatin

Keywords:

Globularization, Grain Boundary Misorientation Spectrum, Hot Deformation, Lamellar Structure, Recrystallization, Two-Phase Titanium Alloy, Warm Deformation

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] S.L. Semiatin, V. Seetharaman, I. Weiss: in "Advances in the Science and Technology of Titanium Alloy Processing, Warrendale, PA: The Minerals, Metals and Materials Society, 1997, p.3.

Google Scholar

[2] G.V. Shakhanova, I.B. Rodina, F.V. Tulyankin: Proc. Fourth Intern, Conf. on Titanium, Kyoto, Japan, 1980, p.849.

Google Scholar

[3] H. Margolin, P. Cohen: in Titanium'80: Science and Technology, Warrendale, PA: The Minerals, Metals and Materials Society, p.1555.

Google Scholar

[4] H. Margolin, P. Cohen: in Titanium'80: Science and Technology, Warrendale, PA: The Minerals, Metals and Materials Society, p.2991.

Google Scholar

[5] I. Weiss, G.E. Welsch, F.H. Froes, D. Eylon: in Titanium: Science and Technology, Oberursel, Germany: Deutsche Gesellshaft fur Metallkunde e.V., p.1503.

Google Scholar

[6] I. Weiss, F.H. Froes D. Eylon, G.E. Welsch: Metall. Trans.A. 17A (1986), p. (1935).

Google Scholar

[7] G.E. Welsch, I. Weiss, D. Eylon, F.H. Froes: in Sixth World conference on Titanium, Les Ulis Cedex, France: Societe Francaise de Metallurgie, 1988, p.1289.

Google Scholar

[8] M.I. Mazursky, G.A. Salishchev: Phys. stat. sol. (b), 188 (1995), p.653.

Google Scholar

[9] S.L. Semiatin, J.F. Thomas, Jr.P. Dadras, Metall. Trans. A, 14A, (1983), p.2363.

Google Scholar

[10] N. Hansen: Metall. Mater. Trans., 32A, 12 (2001), p.2917.

Google Scholar

[11] G.A. Salishchev, S.V. Zherebtsov, S. Yu. Mironov, M.M. Myshlyaev and R. Pippan: Advanced Engineering Materials, 2004 (in press).

Google Scholar

[12] J. K Mackensie: Acta Met., 12, (1964), p.223.

Google Scholar

[13] A. Belyakov, W. Gao, H. Miura and T. Sakai: Metall. Mater. Trans., 29A, 12 (1998), p.2957.

Google Scholar