Materials Science Forum
Vols. 471-472
Vols. 471-472
Materials Science Forum
Vols. 467-470
Vols. 467-470
Materials Science Forum
Vols. 465-466
Vols. 465-466
Materials Science Forum
Vols. 461-464
Vols. 461-464
Materials Science Forum
Vols. 457-460
Vols. 457-460
Materials Science Forum
Vols. 455-456
Vols. 455-456
Materials Science Forum
Vols. 453-454
Vols. 453-454
Materials Science Forum
Vols. 449-452
Vols. 449-452
Materials Science Forum
Vols. 447-448
Vols. 447-448
Materials Science Forum
Vols. 445-446
Vols. 445-446
Materials Science Forum
Vols. 443-444
Vols. 443-444
Materials Science Forum
Vol. 442
Vol. 442
Materials Science Forum
Vols. 440-441
Vols. 440-441
Materials Science Forum Vols. 453-454
Paper Title Page
Abstract: Asymmetric rolling, in which the circumferential velocities of the upper and lower rolls are different, can give rise to intense plastic shear strains and in turn shear deformation textures through the sheet thickness. The ideal shear deformation texture of fcc metals can be approximated by the <111> // ND and {001}<110> orientations, among which the former improves the deep
drawability. The ideal shear deformation texture for bcc metals can be approximated by the Goss {110}<001> and {112}<111> orientations, among which the former improves the magnetic permeability along the <100> directions and is the prime orientation in grain oriented silicon steels. The intense shear strains can result in the grain refinement and hence improve echanical properties. Steel sheets, especially ferritic stainless steel sheets, and luminum alloy sheets may exhibit an undesirable surface roughening known as ridging or roping, when elongated along RD and TD, respectively. The ridging or roping is caused by differently oriented colonies, which are resulted from the <100> oriented columnar structure in ingots or billets, especially for ferritic stainless steels, that is not easily destroyed by the conventional rolling. The breakdown of columnar structure and the grain refinement can be achieved by asymmetric rolling, resulting in a decrease in the ridging problem.
1