Crankshaft Mould CNC Machining Based on CAD/CAM Technique

Ting Ting Guo; Xian Ying Feng; Teng Jiao Sun

doi:10.4028/www.scientific.net/KEM.693.1704

Paper Titles

NC Manufacturing System Based on Multi-Agent Programming
p.1676

An Approach to Generate Three Dimensional Machining Process Model According to Information from Design Model Based on Definition
p.1684

System Design and Experiments of Tool Setting Detection in Micro-Electrochemical Machining Based on LabVIEW
p.1693

An Algorithm and Simulation for the Automatic Welding of Battery Cover
p.1698

Crankshaft Mould CNC Machining Based on CAD/CAM Technique
p.1704

A Method of Pitch Error Compensation for the Open Numerical Control System
p.1711

A New 3D Wax Printer and its Control System
p.1718

Continuous Data Acquisition Equipment Based on Embedded Linux System
p.1724

Design of PID Controller of Feed Servo-System Based on Intelligent Fuzzy Control
p.1728

HomeKey Engineering MaterialsKey Engineering Materials Vol. 693Crankshaft Mould CNC Machining Based on CAD/CAM...

Crankshaft Mould CNC Machining Based on CAD/CAM Technique

Abstract:

Taking the CY4105 crankshaft mould as the research target, this paper introduced the CNC machining method based on CAD/CAM technique. At first, structure of the mould was introduced. Then, machining method was introduced, including blank setting method, cutting tool selection, machining method selection and technological parameters setting method. After that, generation method of the mould machining programs was introduced, including tool path and G codes generation. At last, the mould was machined by a vertical machining center, and the results show that the machining accuracy is high.

You might also be interested in these eBooks

Advanced Materials and Manufacturing Technology II

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 693)

Pages:

1704-1710

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.693.1704

Citation:

Cite this paper

Online since:

May 2016

Authors:

Ting Ting Guo*, Xian Ying Feng, Teng Jiao Sun

Keywords:

Crankshaft Mould, Iron Mould Coated Sand Casting, NC Machining, Technological Parameters, Tool Path

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Lee S.M., Lee D.W., Ha Y.H., Lee S.J., Hwang J.H. & Choi Y.H. A Study on the Influence of Waviness Error to a Hydrostatic Bearing for a Crankshaft Pin Turner. Tribology Transactions, 56(6), pp.1077-1086, (2013).

DOI: 10.1080/10402004.2013.823532

Google Scholar

[2] Sotnykov O., Rodionov M. & Maruschak P. Failure analysis of the hinge-lever mould oscillator bearings of the continuous casting machine. Strength, Fracture and Complexity, 8(3), pp.135-143, (2014).

DOI: 10.3233/sfc-140164

Google Scholar

[3] Cheng T.T., Zeng S., Li B. & Jin T. Study of automatic dynamic balancing system for engine crankshaft. Modular Machine Tool & Automatic Manufacturing Technique, 54(8), pp.1-5, 2012. (in Chinese).

Google Scholar

[4] Chen L.D. & Zhao Y.R. Application of microwave digestion/AAS in detecting crankshaft bearing knock. Spectroscopy and spectral analysis, 34(6), pp.1683-1687, (2014).

Google Scholar

[5] Justinas S. Some friction knots improvements in agricultural machinery. Journal of Measurements in Engineering, 1(3), pp.137-142, (2013).

Google Scholar

[6] Zhao Y.H., Yao G.H. & Huang Y. Numerical Simulation of Semi-solid Die Casting Housing Cap Bearing. Special Casting & Nonferrous Alloys, 32(4), pp.341-344, (2012).

Google Scholar