The Design of the Dynamic Detection System for the Screw’s Lead Precision Testing

Xian Guang Fan; Xin Wang; Yang Lu; Fan Li; Yong Zuo

doi:10.4028/www.scientific.net/AMR.706-708.1055

Paper Titles

Study on Pilot Transfer Function Model Gain of Closed-Loop Pilot-Vehicle System
p.1038

Study on RBF Network Adaptive Control for Robot Loading Based on Uncertainty Compensation
p.1042

Study on the Time Synchronization System in Coal Mine Grid
p.1047

Synchronous Control of Airbag Ejection Mechanism for Underwater Logging Device
p.1051

The Design of the Dynamic Detection System for the Screw’s Lead Precision Testing
p.1055

The Influence of Beam Polarization Degree on SPR Phase Sensor
p.1059

The Liquid Surface Pressure Control System for Low Pressure Die Casting Based on Fuzzy PID
p.1063

The Measurement and Application of a Cesium Optical-Pumping Magnetometer Magnetic Field Gradient Tolerance
p.1068

The Moving Target Detection under Complicated Background Base on BP Neural Networks
p.1072

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 706-708The Design of the Dynamic Detection System for the...

The Design of the Dynamic Detection System for the Screw’s Lead Precision Testing

Abstract:

For the screw’s lead precision dynamic testing needs, the hardware of the design includes two parts: the motion control card and the data acquisition card. We use the motion control card (GT200-SV) as the circular grating and long grating motor controller, and the data acquisition card is consist of FPGA and DSP. FPGA is the core device to realize the synchronous dynamic grating signal and inductive signal data acquisition and DSP is used to realize the function of decoding and communicating to PC by the USB bus protocol. Finally data are evaluated by the software on the computer. The acquisition speed of Screw’s lead precision dynamic detection system can reach 20 KHZ, and it has been successfully applied to a certain type of screw’s lead precision dynamic detection device in a company.

You might also be interested in these eBooks

Mechatronics and Intelligent Materials III

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 706-708)

Pages:

1055-1058

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.706-708.1055

Citation:

Cite this paper

Online since:

June 2013

Authors:

Xian Guang Fan, Xin Wang, Yang Lu, Fan Li, Yong Zuo

Keywords:

Data Acquisition, Field-Programmable Gate Array (FPGA), Screw

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Gao Jian, etc. Investigation of an inertial-sensor-based dynamic position measurements system for a parallel kinematic machine. Transactions of the Institute of Measurement and Control, v26,n4,(2004)

DOI: 10.1191/0142331204tm122oa

Google Scholar

[2] Yin Aihua, etc. A Computer Aided Ball screw Dynamic Lead error Measuring System. Proceeding of the International Symposium on Test andMeasurement,v4,(2003)

Google Scholar

[3] Min-Seok Kim, Sung-Chong Chung. Friction identification of ball-screw driven servo-mechanisms through the limit cycle analysis. Mechatronics,2006(16):131-140

DOI: 10.1016/j.mechatronics.2005.09.006

Google Scholar

[4] H.Yamaguchi , T. Ohkubo. Development of "NSK Si Seris" Ball Screws and Linear Guide. NSK Technical Journal, 2002(673):35-43.

Google Scholar