Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Densification and Microstructure of Tungsten Ore/Al-Cu Composites by Combustion Synthesis
p.749
Preparation of Coal Briquette by Using Coal Waste and Coal Slurry
p.755
Structure Design and Force Analysis of Dushan Inverted Siphon Engineering
p.759
Research on Microstructure and Properties of Welded Joint of 2205 Steel with FCAW
p.763
Study on Weldablity of Dissimilar Steel between 16MnR and S31803
p.768
Synthesis of Lignin-Base Bead Adsorbent and its Application in Removing Pb (II) from Aqueous Solution
p.773
Preparation and Characterization of Fe36Co36B20Si4Nb4 Nanocrystalline/Amorphous Matrix Composite
p.778
A Comparative Study on Co-Sorption of Zn(II) and As(V) by Mixed Fe/Al-PILCs Prepared at Different Calcination Temperatures
p.783
Preparation of Nano-Sized Tin Oxide by Polymer-Network Method
p.789

Study on Weldablity of Dissimilar Steel between 16MnR and S31803

Article Preview

Abstract:

The weldablity of dissimilar steel between 16MnR and S31803 was analyzed and researched. By means of optical microscope (OM), the microstructure of the weld joint was investigated, which is welded by tungsten inert gas arc backing welding (GTAW) and manual arc filling welding (SMAW). The mechanical properties and corrosion resistance of the welded joint was also tested and studied. Results indicate that austenite and acicular ferrite distribute uniformly in the weld metal, which strengths the toughness and ductility of the joint. The austenite content in weld is higher than that in over-heated zone of S31803.The SMAW joint structure is coarsening than that of GTAW and has more austenite content. It is also observed that there are a decarburization layer and a carbon-enriched zone nearby the fusion line. And very small amounts of the third phase of harmful metal phase are found in the fusion zone of S31803 side. The welded joint shows the excellent mechanical properties and corrosion resistance. The impact toughness of the weld metal is higher than in HAZ of 16MnR side, and the impact toughness at GTAW side and in HAZ is superior to the SMAW side.

You might also be interested in these eBooks
Chemical Engineering and Material Properties View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 391-392)

Pages:

768-772

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.391-392.768

Citation:

Cite this paper

Online since:

December 2011

Authors:

Li Yang, Zhan Zhe Zhang

Keywords:

Duplex Steel, Phase Ratio, Weld, Weldability

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] LI Wei-wei ZHAO Xin-wei. Journal of Guangdong Non-Ferrous Metals, Vol. 3 (2005)pp.628-632.

Google Scholar

[2] Olsson J, Snis M. Desalination; Vol. 205 (2007)p.104–113.

Google Scholar

[3] Muthupandi V, Bala Srinivasan P, Seshadri SK, Sundaresan S. Mater Sci Eng A; Vol. 358 (2003)p. : 9–16.

Google Scholar

[4] Sieurin H, Sandström R. Mater Sci Eng A; Vol. 418 (2006)p.250–256.

Google Scholar

[5] Ureña A, Otero E, Utrilla MV, Munez CJ. J Mater Process Technol; Vol. 182 (2007)p.624–631.

Google Scholar

[6] Kaçar R, Acarer M. Mater Sci Eng A; Vol. 363 (2003)p. : 290–296.

Google Scholar

[7] Ul-Hamid A, Tawancy HM, Abbas NM. Eng Fail Anal; Vol. 12 (2005)p.181–191.

Google Scholar

[8] Srinivasan PB, Muthupandi V, Dietzel W, Sivan V. Mater Des; Vol. 27 (2006)p.182–191.

Google Scholar

[9] MA Qi-hui, WANG Shao-gang, ZHANG Liang. Welded Pipe and Tube, Vol. 32 (2009)pp.26-30.

Google Scholar

[10] Naffakh H, Shamanian M, Ashrafizadeh F. J Mater Process Technol, Vol. 209 (2009)p.3628–3639.

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved