Cutting Temperature in Internal Minimum Quantity Lubrication Drilling of Superalloys

Fan Xia Kong; De Yuan Zhang

doi:10.4028/www.scientific.net/AMR.225-226.203

Paper Titles

Autocontrol of Water Condenser Based on PID Controller
p.186

Double Compression Algorithm with Linear Interpolation of Dynamic Threshold
p.190

Data Transmission Based on Guaranteeing QoS in Broadband Access Networks
p.194

Coverage-Preserving Multi-Path Routing Algorithm for Wireless Sensor Networks
p.199

Cutting Temperature in Internal Minimum Quantity Lubrication Drilling of Superalloys
p.203

Experimental and Study of an Direct-Injection, Single Fuel CNG Engine
p.207

Design Practical FBG Sensor Applied to Bridge Health Monitoring
p.212

Study on Suddenly Extrusion Mechanism and Forecasting of Deep Mine Fully Mechanized Mine Head Face
p.216

An Overview of Optical Music Recognition in China
p.223

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 225-226Cutting Temperature in Internal Minimum Quantity...

Cutting Temperature in Internal Minimum Quantity Lubrication Drilling of Superalloys

Abstract:

Super alloys is the ideal material for high temperature components although it has a great difficulty to cut, especially drilling. Minimum Quantity Lubrication (MQL) has a good advantage of green, lubricating and cooling effect. Comparison experiments of MQL cooling drilling and pouring cooling drilling were done with coolant holes in drill. The results show that: the maximum measure temperature is less than 100°C and the amount of wear is very small. Internal Minimum Quantity Lubrication drilling is an effective process to solve problems of high temperature and wear fast for super alloys drilling.

You might also be interested in these eBooks

Advanced Research on Automation, Communication, Architectonics and Materials

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 225-226)

Pages:

203-206

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.225-226.203

Citation:

Cite this paper

Online since:

April 2011

Authors:

Fan Xia Kong, De Yuan Zhang

Keywords:

Cutting Temperature, Minimum Quantity Lubrication (MQL), Superalloy, Tool Wear

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Wenhu Zheng, Y.Z., Mingrong Zhan., ed. Processing Technology Questions and Answers of Difficult to Cut Materials. (Beijing Publishing Group, Beijing: 2001). (in Chinese).

Google Scholar

[2] Dianlong Wang, J.H., Jiyou Pang. Chinese Journal of Mechanical Engineering, Vol. 15 (2002), p.190. (in Chinese).

Google Scholar

[3] Guangyao Liu, Changrong Sun. Machining Technique for High Temperature Alloy Hole. (Doctor degree thesis, Shanghai 2000). (in Chinese).

Google Scholar

[4] B Tasdelen, TWikblom, S Ekered. Journal of Materials Processing Technology, Vol. 200(2008), p.339~346.

Google Scholar

[5] R Heinemann, SHinduja, G Barrow, et al. Interna-tional Journal of Machine Tools and Manufacture, Vol. 46 (2006), p.1~6.

Google Scholar