Paper Titles

Thermo-Mechanical Behaviour of the Raffinate Resulting from the Aqueous Extraction of Sunflower whole Plant in Twin-Screw Extruder: Manufacturing of Biodegradable Agromaterials by Thermo-Pressing
p.63

Failure Mechanisms of Thin Hard Coatings Submitted to Repeated Impacts: Influence of the Film Thickness
p.73

Identification of the Sn96.5Ag3.5 Law Behavior with the Scatter of the Parameters - Study of Aeronautical Application in Power Module
p.83

Numerical Modeling of Chemical and Thermal Coupling in a Silicon Carbide Based Heat Exchanger Reactor
p.93

Digital Image Stereo-Correlation Applied to the Identification of Elastomers
p.103

Lifetime and Reliability Assessment of AlN Substrates Used in Harsh Aeronautic Environments Power Switch Modules
p.113

Prediction of Lifetime in Static Fatigue at High Temperatures for Ceramic Matrix Composites
p.129

An On-Line ANN-Based Approach for Quality Estimation in Resistance Spot Welding
p.141

Stability Prediction in Turning of Flexible Components
p.149

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 112Digital Image Stereo-Correlation Applied to the...

Digital Image Stereo-Correlation Applied to the Identification of Elastomers

Article Preview

Abstract:

As a complement to classic characterization in the identification of elastomers, full-field measurement methods such as image stereo correlation can undeniably contribute to the validation of elastomeric connection behaviour. Indeed, these measurements enable three-dimensional displacement and strains fields over the totality of the studied surface to be finely reached. Characterization tests in shearing on an elastomer were followed by image stereocorrelation up to high strain levels. The experimental results could thus be confronted with theoretical results using an Alexander hyperelastic behaviour law, which enabled the relevance of this law to be validated locally.

You might also be interested in these eBooks

Advances in Structural Analysis of Advanced Materials

Info:

Periodical:

Advanced Materials Research (Volume 112)

Pages:

103-112

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.112.103

Citation:

Cite this paper

Online since:

May 2010

Authors:

Marina Fazzini, Sébastien Mistou, Moussa Karama, B. Desmars

Keywords:

Edge Effects, Elastomer, Full Field Measurement, Hyperelasticity, Large Strain, Quadruple Shearing, Stereo Correlation

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

[1] L. Chevalier, S. Calloch, F. Hild, Y. Marco. Digital image correlation used to analyze the multiaxial behavior of rubber-like materials. Eur.J. Mechanics A/Solids; 20: 1695 (2001).

DOI: 10.1016/s0997-7538(00)01135-9

[2] L. Chevalier, Y. Marco. Tools for multiaxial validation of behaviour laws chosen for modelinghyper-elasticity of rubber-like materials. Polymer Engineering and Science; 42(2): 280 (2002).

DOI: 10.1002/pen.10948

[3] F. Laraba-Abbes, P. Ienny, R. Piques. A new Tailor-Made methodology for the mechanicalbehavior analysis of rubber-like materials - Part I and II. Polymer; 44: 807 (2003).

DOI: 10.1016/s0032-3861(02)00718-8

[4] H ; Alexander. Constitutive relation for rubber-like materials. Int.J. Engineering Science ; 6: 549(1968).

[5] S. Mistou, M. Karama, B. Desmars, P. Peres, E. Piron, P. Heuillet. Application de la méthode de stéréocorrélation d'images à la caractérisation des élastomères en grandes déformations. Revue Instrumentation Mesures Métrologie; 4(3-4): 147(2004).

[6] E. Piron, L. Soufflet, Modélisation du comportement mécanique d'élastomères fortement non linaires par des lois d'Alexander, International Rubber Conference, Lyon, (2006).

[7] B. Wattrisse, A. Chrysochoos, J.M. Muracciole, M. Nemoz-Gaillard. Analysis of strain localization during tensile tests by digital image correlation, Experimental Mechanics; 41(1): 29(2001).

DOI: 10.1007/bf02323101

[8] J.N. Perie, S. Calloch, C. Cluzel, F. Hild. Analysis of a multiaxial test on a C/C composite by using digital image correlation and a damage model. Experimental Mechanics; 42(3): 318(2002).

DOI: 10.1177/001448502321548418

[9] J.J. Orteu. Mesure 3D de formes et de déformations par stéréovision. Techniques de l'Ingénieur. traité Génie Mécanique. BM7015. (2002).

DOI: 10.51257/a-v1-bm7015

[10] D. Garcia, J.J. Orteu, L. Penazzi. A combined temporal tracking and stereo-correlation technique for accurate measurement of 3D displacements: application to sheet metal forming. J. Materials Processing Technology; 125-126: 736(2002).

DOI: 10.1016/s0924-0136(02)00380-1

[11] S.R. McNeill, M.A. Sutton, Z. Miao, J. Ma. Measurement of surface profile using digital image correlation. Experimental Mechanics; 37(1): 13(1997).

DOI: 10.1007/bf02328744

[12] M. Karama, S. Mistou, B. Lorrain. Mesures de déformations en 3D basées sur des techniques de photogrammétrie et d'analyse des distributions de niveaux de gris. Revue Instrumentation et Systèmes ; 207: 32(2001).

DOI: 10.2307/j.ctv18phbxd.14

[13] D. Garcia. Mesures de formes et de champs de déplacements tridimensionnels par stéréocorrélation d'images. Thèse de doctorat, Ecole des Mines d'Albi. (2001).

[14] S. Mistou, M. Karama, O. Dalverny, J.M. Siguier, P. Guigue-Joguet. Mesure 3D sans contact des déplacements et déformations sur des films plastiques transparents par stéréo-corrélation. Mécanique et Industrie; 4(6): 637(2003).

DOI: 10.1016/j.mecind.2003.09.005

[15] L. Toubal, M. Karama, B. Lorrain, Stress concentration around a circular hole in composite plate. Composite Structures; 68(1) : 1(2005).

DOI: 10.1016/j.compstruct.2004.02.016

[16] S. Mistou, M. Karama, B. Desmars, P. Peres, Caractérisation par stéréocorrélation d'images des déformations d'une liaison collée élastomérique en cisaillement, Journée Scientifique et Technique de l'Association Française de Mécanique, Futuroscope Poitiers, 16 mai (2003).

[17] B. Desmars, P. Peres, E. Piron, S. Mistou, M. Karama, Application de la méthode de stéréocorrélation d'images à la caractérisation des élastomères en grandes déformations, Colloque Photomécanique, Ecole des Mines d'Albi, 4-6 mai (2004).