The Influence on the Hardness and Form of U75V from the Different Cooling Rates
p.83
p.83
Improvement of Polymers by UV Irradiation: The Research in Ageing and Solidification - Take Polysiloxane-Modified-Polyacrylates and Asphalt as an Example
p.90
p.90
Preparation of Terephthalic Acid (TPA) and Dioctyl Terephthalate (DOTP) by Anthracite's Alkali Oxygen Oxidation
p.95
p.95
Study on the Preparation and Properties of Desulfurization Gypsum-Based Self-Leveling Material
p.100
p.100
The Preparation of Red Mud Foam Lightweight Thermal Insulation Material
p.104
p.104
Autothermal Reforming of Ethanol for Hydrogen Production: Modeling and Simulation
p.108
p.108
Study on the Vacuum Insulation Panel Protected by Silicone Rubber
p.113
p.113
Influence of CaF2 on the Formation Kinetics of Belite-Calcium Barium Sulphoaluminate Cement Clinker
p.118
p.118
Influence of Limestone Powder on the Performance of Cementitious Materials
p.123
p.123
The Preparation of Red Mud Foam Lightweight Thermal Insulation Material
Abstract:
Red mud foam lightweight thermal insulation material was prepared by red mud, fly ash, cement as main raw materials, adding a certain amount of adhesive, through ingredients, mixing, molding, foam, sintering process. The influence of the ratio of red mud and fly ash on the properties of materials was studied and the mechanism of influence was analyzed. The test results show that performances of the samples were best when the ratio of red mud and fly ash is 5:4 and its flexural strength is 0.44MPa, compressive strength is 1.23MPa, density is 481kg/m3.
You might also be interested in these eBooks
Info:
Periodical:
Applied Mechanics and Materials (Volumes 541-542)
Pages:
104-107
Citation:
Online since:
March 2014
Authors:
Keywords:
Price:
Permissions: