A Comparative Study of Fatigue Performance to Resist Reflective Cracking among three Different Stress-Absorbing Materials

Hui Wang

doi:10.4028/www.scientific.net/AMM.303-306.2625

Paper Titles

Test to Fly Ash Recycled Concrete under Different Water Cement Ratio
p.2606

Microwave Heating in Iron Ore Magnetization Roasting the Current Status
p.2611

The Pulse Electrolysis Treatment of Waste Emulsion Orthogonal Experimental Study
p.2616

Porosity Simulation by Using Block Error Method
p.2620

A Comparative Study of Fatigue Performance to Resist Reflective Cracking among three Different Stress-Absorbing Materials
p.2625

Research into the Preparation and Performance of PP-G-DL411 Compatibilizer and PP-G-DL411/GF/ PP Composites
p.2636

The Synthesis and Characterization of 1-methyl-3-butyl imidazole Tetrafluoroborate
p.2640

Investigation of Magnetic Behavior of SmCo₅/SmCo₂ Nanocrystalline Magnets
p.2644

Dynamic Testing at High Strain Rates of AZ31 Magnesium Alloys on SHPB Equipment
p.2648

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 303-306A Comparative Study of Fatigue Performance to...

A Comparative Study of Fatigue Performance to Resist Reflective Cracking among three Different Stress-Absorbing Materials

Abstract:

Through full-scale fatigue test, a comparative study of the ability to resist temperature fatigue and load fatigue was performed among high elasticity rubber mastic stress-absorbing band, fiberglass-polyester paving mat and SAMPAVE stress-absorbing layer, which were technologies to prevent reflection cracking. And they were verified by engineering. The results suggest that the overlay structures with the old cement concrete pavement partially treated with high elasticity rubber mastic stress-absorbing band are of the best fatigue performance to prevent reflection crack caused by load, and its temperature fatigue performance is equivalent to the overlay including SAMPAVE stress-absorbing layer. At the same time, Rubber Mastic Stress-absorbing Band is the most economical way.

You might also be interested in these eBooks

Sensors, Measurement and Intelligent Materials

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 303-306)

Pages:

2625-2635

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.303-306.2625

Citation:

Cite this paper

Online since:

February 2013

Authors:

Hui Wang

Keywords:

Asphalt Overlay, Fiberglass-Polyester Paving Mat, Reflective Cracking, Rubber Mastic Stress-Absorbing Band, Stress-Absorbing Layer

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Zhiming Tan, Yi Jiang, Linquan Guo, Yuming Zhou. Thermal Stresses in Asphalt Overlay Paved on Existing Cement Concrete Pavements(III): Thermal Stresses Analysis and Local Treatment Effects[J]. Journal of TONGJI University (National science), 2009, 37(3): 333-338. (In Chinese).

Google Scholar

[2] Zihong Ge. The Technical Characteristics of the High-elastic Rubber Mastic Stress-absorbing Band [J]. Shanxi Science & Technology of Communications, 2010, 6(207): 7-9. (In Chinese).

Google Scholar

[3] Zihong Ge. The Material and Application Process of the High-elastic Rubber Mastic Stress-absorbing Band[J]. Journal of Highway and Transportation Research and Development, 2011, 11(83): 77-79. (In Chinese).

Google Scholar

[4] Zhisheng Cui. The Application of the High-elastic Stress-absorbing Band in the Overlay Projects on Old Concrete Pavement. [J]. Shanxi Science & Technology of Communications, 2011, 5(212): 16-17. (In Chinese).

Google Scholar

[5] Weidong Liao, Chen Shuanfa, Liu Yunquan. The Fatigue Performance Study of the STRATA Stress-absorbing Layer[J]. Journal of Wu Han University of Technology, 2003, 25(12): 1-4. (In Chinese).

Google Scholar