[1]
Auto/Steel Partnership; Tailor Welded Blank Design and Manufacturing Manual, Technical Report, (1995).
Google Scholar
[2]
Eisenmenger, M., Bhatt, K.K., and Shi, M. F, Influence of Laser Welding Parameters on Formability and Robustness of Blank Manufacturing: An Application to a Body Side Frame, SAE Technical Paper Series, PaperNo. 950922, (1995), p.171–182.
DOI: 10.4271/950922
Google Scholar
[3]
Bhatt, K.K., Eisenmenger, M., and Shi, M.F., Formability of Mash Seam Welded Blanks: Effects of Welding Set up Conditions, SAE Technical Paper Series, Paper No. 950923, (1995), p.183–189.
Google Scholar
[4]
Doege, E., Dohrmann, H., and Kosters, R., Simulation and Optimization of the Forming Process of Tailored Blanks, Proceedings of Numisheet, (1996), p.199–204.
Google Scholar
[5]
Lee, A.P., Feltham, E., and VanDeventer, J., Tailor Welded Blank Technology for Automotive Applications, Sheet Metal Stamping for Automotive Applications, SAE Technical Paper Series, Paper No. 960817, (1996), p.91–102.
DOI: 10.4271/960817
Google Scholar
[6]
Ahmetoglu, M.A., Brouwers, D., Shulkin, L., Taupin, L., Kinzel, G.L., and Altan, T., Deep Drawing of Round Cups from Tailor-welded Blanks, SAE Trans. 53, (1995), p.684–694.
DOI: 10.1016/0924-0136(94)01767-u
Google Scholar
[7]
Siegert, K., and Knabe, E., Fundamental Research and Draw Die Concepts for Deep Drawing of Tailored Blanks, SAE Trans. 104, (1995), p.866–876.
DOI: 10.4271/950921
Google Scholar
[8]
Cayssials, F., An Industrial Application of Specific Forming Limit Curves for Tailor Welded Blanks, Proceedings of the 2000 International Deep Drawing Research Group, Ann Arbor, MI, June, (2000), p.17–22.
Google Scholar
[9]
He, S., Wu, X., and Hu, S.J., Formability Enhancement for Tailor Welded Blanks Using Blank Holding Force Control, Journal of Manufacturing Science and Engineering, Vol. 125, pp.461-467, (2003).
DOI: 10.1115/1.1580853
Google Scholar
[10]
Shi, M.F., Pickett, K.M., and Bhatt, K.K., Formability Issues in the Application of Tailor Welded Blank Sheets, SAE Trans., Paper No. 930278, (1993).
DOI: 10.4271/930278
Google Scholar
[11]
S. k. Panda, V.H. Baltazer Hernandez, M.L. Kuntz, and Y. Zhou, Formability Analysis of Diode-Laser-Welded Tailored Blanks of Advanced High-Strength Steel Sheet, Metallurgical and Materials Transactions A, Volume 40A, (2009), p.1955-(1967).
DOI: 10.1007/s11661-009-9875-4
Google Scholar
[12]
S.S. Hecker, A cup test for assessing stretchability, Met. Eng. Quart. Vol. 14, (1974), p.30–36.
Google Scholar
[13]
R. Hill, Proc. Roy. Soc. Lond. 193A, (1948), p.197–281.
Google Scholar