[1]
N. H. M. Huzaim et al., "Potential of Rapid Tooling in Rapid Heat Cycle Molding: A Review," Materials, 15 (2022) 3725.
Google Scholar
[2]
J. G. Kovács and T. Bercsey, "Influence of mold properties on the quality of injection molded parts," Periodica Polytechnica Mechanical Engineering, 49 (2005) 115–122.
Google Scholar
[3]
M. Á. Caminero, A. Romero, J. M. Chacón, P. J. Núñez, E. García-Plaza, and G. P. Rodríguez, "Additive manufacturing of 316L stainless-steel structures using fused filament fabrication technology: mechanical and geometric properties," Rapid Prototyp J, 27 (2021) 583–591.
DOI: 10.1108/rpj-06-2020-0120
Google Scholar
[4]
J. Damon, S. Dietrich, S. Gorantla, U. Popp, B. Okolo, and V. Schulze, "Process porosity and mechanical performance of fused filament fabricated 316L stainless steel," Rapid Prototyp J, 25 (2019) 1319–1327.
DOI: 10.1108/rpj-01-2019-0002
Google Scholar
[5]
H. Gong, D. Snelling, K. Kardel, and A. Carrano, "Comparison of Stainless Steel 316L Parts Made by FDM- and SLM-Based Additive Manufacturing Processes," JOM, 71 (2019) 880–885.
DOI: 10.1007/s11837-018-3207-3
Google Scholar
[6]
R. Hussin et al., "Hybrid mold: Comparative study of rapid and hard tooling for injection molding application using metal epoxy composite (MEC)," Materials, 14 (2021).
DOI: 10.3390/ma14030665
Google Scholar
[7]
N. Senthilkumar, K. Kalaichelvan, and K. Elangovan, "Mechanical behaviour of aluminum particulate epoxy composite–experimental study and numerical simulation," International Journal of Mechanical and Materials Engineering, 7 (2012) 214–221.
Google Scholar
[8]
V. K. Srivastava and A. Verma, "Mechanical behaviour of copper and aluminium particles reinforced epoxy resin composites," American J. of Materials Science, 5 (2015) 84–89.
Google Scholar
[9]
R. bin Hussin et al., "The potential of metal epoxy composite (MEC) as hybrid mold inserts in rapid tooling application: a review," Rapid Prototyping Journal, 27 (2021) 1069–1100.
DOI: 10.1108/rpj-01-2020-0025
Google Scholar
[10]
M. Tanwyn Mohd Khushairi, S. Sharif, K. Rijal Jamaludin, and A. Saladin Mohruni, "Effects of Metal Fillers on Properties of Epoxy for Rapid Tooling Inserts" 7, (2017).
DOI: 10.18517/ijaseit.7.4.2480
Google Scholar
[11]
B. Liu, Y. Wang, Z. Lin, and T. Zhang, "Creating metal parts by Fused Deposition Modeling and Sintering," Mater Lett, 263 (2020).
Google Scholar
[12]
M. Seleznev and J. D. Roy-Mayhew, "Bi-metal composite material for plastic injection molding tooling applications via fused filament fabrication process," Addit Manuf, 48 (2021).
DOI: 10.1016/j.addma.2021.102375
Google Scholar
[13]
H. Ramazani and A. Kami, "Metal FDM, a new extrusion-based additive manufacturing technology for manufacturing of metallic parts: a review," Progress Ad. Manuf., 7 (2022) 609–626.
DOI: 10.1007/s40964-021-00250-x
Google Scholar
[14]
G.A. Mendible, J.A. Rulander, and S.P. Johnston, "Comparative study of rapid and conventional tooling for plastics injection molding," Rapid Prototyp J, 23 (2017) 344–352.
DOI: 10.1108/rpj-01-2016-0013
Google Scholar
[15]
S. Feng, A. M. Kamat, and Y. Pei, "Design and fabrication of conformal cooling channels in molds: Review and progress updates," Int. J. of Heat and Mass Transfer, 171 (2021).
DOI: 10.1016/j.ijheatmasstransfer.2021.121082
Google Scholar
[16]
C.-C. Kuo, S.-X. Qiu, G.-Y. Lee, J. Zhou, and H.-Q. He, "Characterizations of polymer injection molding tools with conformal cooling channels fabricated by direct and indirect rapid tooling technologies", Int J Adv Manuf Technol 117, (2021) 343–360.
DOI: 10.1007/s00170-021-07778-w
Google Scholar
[17]
C. Tosto, J. Tirillò, F. Sarasini, and G. Cicala, "Hybrid metal/polymer filaments for fused filament fabrication (FFF) to print metal parts," Applied Sciences, 11 (2021) 1444.
DOI: 10.3390/app11041444
Google Scholar
