机械工程学报 ›› 2020, Vol. 56 ›› Issue (19): 221-238.doi: 10.3901/JME.2020.19.221
吴甲民1,2,3, 杨源祺1,2, 王操1,2, 何逸宁1,2, 石婷1,2, 甘恬1,2, 陈双1,2,3, 史玉升1,2,3, 王卫4
收稿日期:
2020-04-28
修回日期:
2020-05-28
出版日期:
2020-10-05
发布日期:
2020-11-17
通讯作者:
吴甲民(通信作者),男,1984年出生,博士,副教授,博士研究生导师。主要研究方向为陶瓷增材制造技术及其应用。E-mail:jiaminwu@hust.edu.cn
基金资助:
WU Jiamin1,2,3, YANG Yuanqi1,2, WANG Cao1,2, HE Yining1,2, SHI Ting1,2, GAN Tian1,2, CHEN Shuang1,2,3, SHI Yusheng1,2,3, WANG Wei4
Received:
2020-04-28
Revised:
2020-05-28
Online:
2020-10-05
Published:
2020-11-17
摘要: 陶瓷材料因具有高硬度、高强度、耐高温、抗腐蚀等优异性能,被广泛应用于航空航天、生物医疗等领域,但是应用于上述领域的复杂结构陶瓷的制造仍然是一个重要的挑战。增材制造技术通过逐层堆积材料的方式来获得实体,在制造复杂结构陶瓷方面具有传统成形方式所无法比拟的优势。在众多陶瓷增材制造技术中,陶瓷光固化技术因其理想的成形质量而受到广泛关注和重视。在介绍立体光固化、数字光处理这两种主流陶瓷光固化技术的原理和特点的基础上,系统地介绍和分析了立体光固化技术和数字光处理技术的研究现状、应用以及存在的问题。最后,对陶瓷光固化技术及其应用进行了总结和展望。
中图分类号:
吴甲民, 杨源祺, 王操, 何逸宁, 石婷, 甘恬, 陈双, 史玉升, 王卫. 陶瓷光固化技术及其应用[J]. 机械工程学报, 2020, 56(19): 221-238.
WU Jiamin, YANG Yuanqi, WANG Cao, HE Yining, SHI Ting, GAN Tian, CHEN Shuang, SHI Yusheng, WANG Wei. Photopolymerization Technologies for Ceramics and Their Applications[J]. Journal of Mechanical Engineering, 2020, 56(19): 221-238.
[1] CHEN Zhangwei,LI Ziyong,LI Junjie,et al. 3D printing of ceramics:A review[J]. Journal of the European Ceramic Society,2019,39(4):661-687. [2] ELORZ J A P-S,GONZáLEZ D F,VERDEJA L F. Structural materials:Ceramics[M]. Berlin:Springer International Publishing,2019. [3] MALIK H,DARWOOD A R J,SHAUNAK S,et al. Three-dimensional printing in surgery:A review of current surgical applications[J]. Journal of Surgical Research,2015,199(2):512-522. [4] JAVAID M,HALEEM A. 3D printed tissue and organ using additive manufacturing:An overview[J]. Clinical Epidemiology and Global Health,2020,8(2):586-594. [5] KO M,SHIN D,AHN H,et al. Informed ceramics:Multi-axis clay 3D printing on freeform molds[M]. Berlin:Springer International Publishing,2018. [6] 吴甲民,陈敬炎,陈安南,等. 陶瓷零件增材制造技术及在航空航天领域的潜在应用[J]. 航空制造技术,2017,60(10):40-49. WU Jiamin,CHEN Jingyan,CHEN Annan,et al. Additive manufacturing of ceramic components and its potential application in aerospace field[J]. Aeronautical Manufacturing Technology,2017,60(10):40-49. [7] YAO Dongxu,XIA Yongfeng,ZENG Yuping,et al. Porous Si3N4 ceramics prepared via slip casting of Si and reaction bonded silicon nitride[J]. Ceramics International,2011,37(8):3071-3076. [8] LU Yuju,LIU Jingjing,REN Bo,et al. Room-temperature gelcasting of alumina with tartaric acid and glutaraldehyde[J]. Ceramics International,2020,46(8,Part A):11432-11435. [9] WU Jjiamin,LIU Shanshan,LIU Mengyue,et al. Preparation of dense 0.9Al2O3-0.1TiO2 ceramics with highly improved microwave dielectric properties by a noncontaminated DCC method[J]. Ceramics International,2018,44(18):22205-22211. [10] RAHAMAN M N. Ceramic processing and sintering[M]. Boca Raton:CRC Press,1995. [11] 王志永,赵宇辉,赵吉宾,等. 陶瓷增材制造的研究现状与发展趋势[J]. 真空,2020,57(01):67-75. WANG Zhiyong,ZHAO Yuhui,ZHAO Jibin,et al. Research status and development trend of ceramic precursors[J]. Vacuum,2020,57(01):67-75. [12] HWA L C,RAJOO S,NOOR A M,et al. Recent advances in 3D printing of porous ceramics:A review[J]. Current Opinion in Solid State and Materials Science,2017,21(6):323-347. [13] CHEN Annan,GAO Feng,LI Meng,et al. Mullite ceramic foams with controlled pore structures and low thermal conductivity prepared by SLS using core-shell structured polyamide12/FAHSs composites[J]. Ceramics International,2019,45(12):15538-15546. [14] 刘伟,李能,周标,等. 复杂结构与高性能材料增材制造技术进展[J]. 机械工程学报,2019,55(20):128-151,159. LIU Wei,LI Neng,ZHOU Biao,et al. Progress in additive manufacturing on complex structures and high-performance materials[J]. Journal of Mechanical Engineering,2019,55(20):128-151,159. [15] 陈双,吴甲民,史玉升. 3D打印材料及其应用概述[J]. 物理,2018,47(11):715-724. CHEN Shuang,WU Jiamin,SHI Yusheng. General introduction of 3D printing materials and their applications[J]. Physics,2018,47(11):715-724. [16] CHEN Annan,WU Jiamin,LIU Kai,et al. High-performance ceramic parts with complex shape prepared by selective laser sintering:A review[J]. Advances in Applied Ceramics,2017,117(4):1-8. [17] BEKAS D G,HOU Y,LIU Y,et al. 3D printing to enable multifunctionality in polymer-based composites:A review[J]. Composites Part B:Engineering,2019,179:107540. [18] 郭璐,朱红. 陶瓷3D打印技术及材料的研究现状[J]. 陶瓷学报,2020,41(1):22-28. GUO Lu,ZHU Hong. Progress in ceramic 3D printing technology and materials[J]. Journal of Ceramics,2020,41(1):22-28. [19] 吴甲民,陈安南,刘梦月,等. 激光选区烧结用陶瓷材料的制备及其成型技术[J]. 中国材料进展,2017,36(Z1):575-582. WU Jiamin,CHEN Annan,LIU Mengyue,et al. Preparation of ceramic materials used for selective laser sintering and related forming methods[J]. Materials China,2017,36(Z1):575-582. [20] QUAN Haoyuan,ZHANG Ting,XU Hang,et al. Photo-curing 3D printing technique and its challenges[J]. Bioactive Materials,2020,5(1):110-115. [21] 黄淼俊,伍海东,黄容基,等. 陶瓷增材制造(3D打印)技术研究进展[J]. 现代技术陶瓷,2017,38(4):248-266. HUANG Miaojun,WU Haidong,HUANG Rongji,et al. A review on ceramic additive manufacturing (3D Printing)[J]. Advanced Ceramics,2017,38(4):248-266. [22] LEE K S,KIM R H,YANG D Y,et al. Advances in 3D nano/microfabrication using two-photon initiated polymerization[J]. Progress in Polymer Science,2008,33(6):631-681. [23] KAWATA S,SUN H B,TANAKA T,et al. Finer features for functional microdevices[J]. Nature,2001,412(6848):697-698. [24] HULL C W. Method and apparatus for production of three-dimensional objects by stereolithography:USA,EP0171069[P]. 1986-02-12. [25] 潘翔,莫健华,冯昕,等. 光固化成形中的变补偿量扫描研究[J]. 激光杂志,2007,28(4):75-76. PAN Xiang,MO Jianhua,FENG Xin,et al. Research on scanning of variable radius compensation in SLA[J]. Laser Journal,2007,28(4):75-76. [26] 李子健. SLA变光斑扫描方法研究与实现[D]. 武汉:华中科技大学,2019. LI Zijian. Research and implementation of SLA variable spot scanning method[D]. Wuhan:Huazhong University of Science & Technology,2019. [27] 胥光申,赵万华,卢秉恒. 用高分辨率快速成形系统制作细微结构[J]. 机械工程学报,2005,41(9):82-85. XU Guangshen,ZHAO Wanhua,LU Bingheng. Fabrication of microstructures using high-resolution stereolithography system[J]. Journal of Mechanical Engineering,2005,41(9):82-85. [28] 胥光申,邓攀,赵万华,等. 高分辨率激光快速成形系统研究与开发[J]. 机械工程学报,2005,41(2):127-131. XU Guangshen,DENG Pan,ZHAO Wanhua,et al. Research and development of high-resolution stereolithography system for small objects[J]. Journal of Mechanical Engineering,2005,41(2):127-131. [29] GRIFFITH M L,HALLORAN J W. Freeform Fabrication of Ceramics via Stereolithography[J]. Journal of the American Ceramic Society,1996,79(10):2601-2608. [30] BÁRTOLO P J. Stereolithography:Materials,processes and applications[M]. Boston:Springer,2011. [31] DING Guojiao,HE Rujie,ZHANG Keqiang,et al. Dispersion and stability of SiC ceramic slurry for stereolithography[J]. Ceramics International,2020,46(4):4720-4729. [32] SUN Jinxing,BINNER J,BAI Jiaming. Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography[J]. Journal of the European Ceramic Society,2019,39(4):1660-1667. [33] 阎相忠. 基于光固化水基陶瓷浆料的义齿成型研究[D]. 兰州:兰州理工大学,2019. YAN Xiangzhong. The research on denture forming based on stereolithography for an aqueous-based ceramic suspension[D]. Lanzhou:Lanzhou University of Technology,2019. [34] 宁会峰,阎相忠,朱悦,等. 水基光固化陶瓷浆料的黏度与分散性研究[J]. 硅酸盐通报,2017,36(11):3944-3949. NING Huifeng,YAN Xiangzhong,ZHU Yue,et al. Research on viscosity and dispersity of aqueous ceramic suspension for stereolithography[J]. Bulletin of the Chinese Ceramic Society,2017,36(11):3944-3949. [35] WANG Zhen,HUANG Chuanzhen,WANG Jun,et al. Development of a novel aqueous hydroxyapatite suspension for stereolithography applied to bone tissue engineering[J]. Ceramics International,2019,45(3):3902-3909. [36] 刘丹丹,李芳,张小敏,等. 光固化3D打印用于陶瓷制备的研究进展[J]. 杭州师范大学学报,2019,18(6):576-580. LIU Dandan,LI Fang,ZHANG Xiaomin,et al. Research progress in the ceramic production by stereolithography 3D printing[J]. Journal of Hangzhou Normal University,2019,18(6):576-580. [37] CORCIONE C E,GRECO A,LICCIULLI A,et al. Ceramic components built by stereolithography[C]//AMST'02 Advanced Manufacturing Systems and Technology. Udine:International Centre for Mechanical Sciences,2002,731-739. [38] SUN Cheng,ZHANG Xiang. The influences of the material properties on ceramic micro-stereolithography[J]. Sensors and Actuators A:Physical,2002,101(3):364-370. [39] BADEV A,ABOULIATIM Y,CHARTIER T,et al. Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography[J]. Journal of Photochemistry and Photobiology A:Chemistry,2011,222(1):117-122. [40] CHARTIER T,BADEV A,ABOULIATIM Y,et al. Stereolithography process:Influence of the rheology of silica suspensions and of the medium on polymerization kinetics-Cured depth and width[J]. Journal of the European Ceramic Society,2012,32(8):1625-1634. [41] LIU Yao,CHENG Lijin,LI Hao,et al. Formation mechanism of stereolithography of Si3N4 slurry using silane coupling agent as modifier and dispersant[J]. Ceramics International,2020,46(10,Part A):14583-14590. [42] LIU Xiaoyan,ZOU Bin,XING Hongyu,et al. The preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing[J]. Ceramics International,2020,46(1):937-944. [43] XING Hongyu,ZOU Bin,WANG Xinfeng,et al. Fabrication and characterization of SiC whiskers toughened Al2O3 paste for stereolithography 3D printing applications[J]. Journal of Alloys and Compounds,2020,828:154347. [44] TAKAGI T,NAKAJIMA N. Photoforming applied to fine machining[C]//Micro Electro Mechanical Systems,Proceedings IEEE Micro Electro Mechanical Systems,February 10,1993,Fort Lauderdale:Institute of Electrical and Electronics Engineers,1993:173-178. [45] BERTSCH A,ZISSI S,JéZéQUEL J Y,et al. Microstereophotolithography using a liquid crystal display as dynamic mask-generator[J]. Microsystem Technologies,1997,3(2):42-45. [46] KANEKO Y,TAKAHASHI K. LADp-6 UV exposure system for photolithography and rapid prototyping using DMD projector[C]//SID Conference Record of the International Display Research Conference,Saitama Prefecture:ITE Technical,2001,42. [47] TUMBLESTON J R,SHIRVANYANTS D,ERMOSHKIN N,et al. Continuous liquid interface production of 3D objects[J]. Science,2015,347(6228):1349-1352. [48] KELLY B E,BHATTACHARYA I,HEIDARI H,et al. Volumetric additive manufacturing via tomographic reconstruction[J]. Science,2019,363(6431):1075-1079. [49] 邱志惠,陈号,黄祺,等. 面曝光3D打印机光强检测补偿系统研究与实现[J]. 西安交通大学学报,2017,51(08):77-83. QIU Zhihui,CHEN Hao,HUANG Qi,et al. Measurement and compensation of DLP projector light intensity for mask projection stereolithography[J]. School of Mechanical Engineering,Xi'an Jiaotong University,2017,51(08):77-83. [50] 毋立芳,赵立东,邱健康,等. 面向面曝光3D打印的模型自适应光照均匀化方法[J]. 信号处理,2017,33(10):1308-1316. WU Lifang,ZHAO Lidong,QIU Jiankang,et al. The model adaptive energy homogenization scheme for mask projection 3D printing[J]. Faculty of Information Technology,2017,33(10):1308-1316. [51] 陈国大. 数字投影微光刻3D打印关键技术研究[D]. 广州:华南理工大学,2019. CHEN Gouda. Research on key techniques of digital projection microlithographic 3D printing[D]. Guangzhou:South China University of Technology,2019. [52] EMIL J,OSCAR L M,JAN J,et al. Influence of resin composition on the defect formation in alumina manufactured by stereolithography[J]. Materials,2017,10(2):138. [53] WU Chenming,YI Ran,LIU Yongjin,et al. Delta DLP 3D printing with large size[C]//2016 IEEE/RSJ International Conference on Intelligent Robots and Systems. Daejeon:IEEE,2016:2155-2160. [54] 赵立东. 融合智能信息处理的面曝光3D打印关键技术研究[D]. 北京:北京工业大学,2018. ZHAO Lidong. Research on key issues of mask projection 3D priting with intelligent information processing[D]. Beijing:Beijing University of Technology,2018. [55] 权坤. 双紫外掩模面成型机理及成型精度研究[D]. 西安:西安科技大学,2019. QUAN Kun. Research on forming mechanism and accuracy of double ultraviolet mask projection stereolithography technology[D]. Xi'an:Xi'an University of Science and Technology,2019. [56] 陈凌枭. 基于DLP技术的陶瓷骨支架3D打印机的研制[D]. 广州:广东工业大学,2019. CHEN Lingxiao. Development of 3D printer based on DLP technology for ceramic bone support[D]. Guangzhou:Guangdong University of Technology,2019. [57] XING Zhanwen,LIU Weiwei,CHEN Yao,et al. Effect of plasticizer on the fabrication and properties of alumina ceramic by stereolithography-based additive manufacturing[J]. Ceramics International,2018,44(16):19939-19944. [58] ZHOU Maopeng,LIU Wei,WU Haidong,et al. Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography-Optimization of the drying and debinding processes[J]. Ceramics International,2016,42(10):11598-11602. [59] ZHANG Xiang,JIANG Xiaoning,SUN Cheng. Micro-stereolithography of polymeric and ceramic microstructures[J]. Sensors & Actuators:A Physical,1999,77(2):149-156. [60] HE Li,FEI Fan,WANG Wenbo,et al. Support-free ceramic stereolithography of complex overhanging structures based on an elasto-viscoplastic suspension feedstock[J]. ACS Applied Materials & Interfaces,2019,11(20):18849-18857. [61] SONG S Y,PARK M S,LEE D,et al. Optimization and characterization of high-viscosity ZrO2 ceramic nanocomposite resins for supportless stereolithography[J]. Materials & Design,2019,180:107960. [62] XING Hongyu,ZOU Bin,LIU Xiaoyan,et al. Effect of particle size distribution on the preparation of ZTA ceramic paste applying for stereolithography 3D printing[J]. Powder Technology,2020,359:314-322. [63] BRINCKMANN S A,PATRA N,YAO J,et al. Stereolithography of SiOC polymer derived ceramics filled with SiC micronwhiskers[J]. Advanced Engineering Materials,2018,20(11):1800593. [64] LIU Yao,ZHAN Lina,HE Yu,et al. Stereolithographical fabrication of dense Si3N4 ceramics by slurry optimization and pressure sintering[J]. Ceramics International,2020,46(2):2063-2071. [65] CHEN Qinghua,ZOU Bin,LAI Qingguo,et al. A study on biosafety of HAP ceramic prepared by SLA-3D printing technology directly[J]. Journal of the Mechanical Behavior of Biomedical Materials,2019,98:327-335. [66] 贲玥. 3D打印用β-TCP生物陶瓷粉体的制备及其性能研究[D]. 徐州:江苏师范大学,2018. BEN Yue. Fabrication and performance research of β-TCP bioceramic powders for 3D printing[D]. Xuzhou:Jiangsu Normal University,2018. [67] MAKVANDI P,CORCIONE C E,PALADINI F,et al. Antimicrobial modified hydroxyapatite composite dental bite by stereolithography[J]. Polymers for Advanced Technologies,2018,29(1):364-371. [68] LIAN Qin,SUI Wenquan,WU Xiangquan,et al. Additive manufacturing of ZrO2 ceramic dental bridges by stereolithography[J]. Rapid Prototyping Journal,2018,24(1):114-119. [69] CARPENTIER L,DELHOTE N,VERDEYME S,et al. Compact Ku band filter based on BMT dielectric resonators made in a single part using 3D ceramic stereolithography process[C]//2012 IEEE/MTT-S International Microwave Symposium Digest. Montreal:Institute of Electrical and Electronics Engineers,2012,1-3. [70] LI Jin,HUANG Guanlong,YUAN Tao,et al. A Ku-Band Wideband 3-D Printed Interdigital Bandpass Filter Free of Post Fabrication Tuning[C]//Proceedings of the 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting,Boston:Institute of Electrical and Electronics Engineers,2018,1439-1440. [71] CHEN Yan,BAO Xiulan,WONG Chi-Man,et al. PZT ceramics fabricated based on stereolithography for an ultrasound transducer array application[J]. Ceramics International,2018,44(18):22725-22730. [72] WANG Wei,SUN Jinxing,GUO Binbin,et al. Fabrication of piezoelectric nano-ceramics via stereolithography of low viscous and non-aqueous suspensions[J]. Journal of the European Ceramic Society,2020,40(3):682-688. [73] LOU Yihui,WANG Fei,LI Zijian,et al. Fabrication of high-performance MgTiO3-CaTiO3 microwave ceramics through a stereolithography-based 3D printing[J]. Ceramics International,2020,46(10,Part B):16979-16986. [74] JANA P,SANTOLIQUIDO O,ORTONA A,et al. Polymer-derived SiCN cellular structures from replica of 3D printed lattices[J]. Journal of the American Ceramic Society,2018,101(7):2732-2738. [75] ECKEL Z C,ZHOU Chaoyin,MARTIN J H,et al. Additive manufacturing of polymer-derived ceramics[J]. Science,2016,351(6268):58-62. [76] TIAN Xiaoyong,ZHANG Weigang,LI Dichen,et al. Reaction-bonded SiC derived from resin precursors by Stereolithography[J]. Ceramics International,2011,38(1):589-597. [77] LU Z L,LU F,CAO J W,et al. Manufacturing properties of turbine blades of carbon fiber-reinforced SiC composite based on stereolithography[J]. Materials and Manufacturing Processes,2014,29(2):201-209. [78] HATZENBICHLER M,GRUBER S,STAMPFL J,et al. DLP-based light engines for additive manufacturing of ceramic parts[R]. 8254-82540E-10. SPIE MOEMS-MEMS. International Society for Optics and Photonics,2012. [79] SCHWENTENWEIN M,HOMA J. Additive manufacturing of dense alumina ceramics[J]. International Journal of Applied Ceramic Technology,2015,12(1):1-7. [80] BORLAF M,SERRA-CAPDEVILA A,COLOMINAS C,et al. Development of UV-curable ZrO2 slurries for additive manufacturing (LCM-DLP) technology[J]. Journal of the European Ceramic Society,2019,39(13):3797-3803. [81] HE Rongxuan,LIU Wei,WU Ziwei,et al. Fabrication of complex-shaped zirconia ceramic parts via a DLP-stereolithography-based 3D printing method[J]. Ceramics International,2018,44(3):3412-3416. [82] HUANG Rongji,JIANG Qiangguo,WU Haidong,et al. Fabrication of complex shaped ceramic parts with surface-oxidized Si3N4 powder via digital light processing based stereolithography method[J]. Ceramics International,2019,45(4):5158-5162. [83] 严鹏飞,严彪,王联凤,等. 氮化硅光固化增材制造工艺与性能的研究[J]. 有色金属材料与工程,2018,39(6):12-15. YAN Pengfei,YAN Biao,WANG Lianfeng,et al. Study on stereo lithography additive manufacturing process and properties silicon nitride[J]. Nonferrous Metal Materials and Engineering,2018,39(6):12-15. [84] https://www.lithoz.com/produkte/material. [85] 杨飞,连芩,武向权,等. 陶瓷面曝光快速成型工艺研究[J]. 机械工程学报,2017,53(7):138-144. YANG Fei,LIAN Qin,WU Xiangquan,et al. Ceramics fabrication using rapid prototyping of mask projection stereolithography[J]. Journal of Mechanical Engineering,2017,53(7):138-144. [86] 张航,许宋锋,熊胤泽,等. 多孔β-TCP生物陶瓷DLP打印工艺研究[J]. 机械工程学报,2019,55(15):81-87. ZHANG Hang,XU Songfeng,XIONG Yinze,et al. Fabrication of porous β-TCP bioceramics using digital light processing[J]. Journal of Mechanical Engineering,2019,55(15):81-87. [87] CHEN Fen,ZHU Hao,WU Jiamin,et al. Preparation and biological evaluation of ZrO2 all-ceramic teeth by DLP technology[J]. Ceramics International,2020,46(8,Part A):11268-11274. [88] ZHANG Jiancheng,HUANG Da,LIU Shuifeng,et al. Zirconia toughened hydroxyapatite biocomposite formed by a DLP 3D printing process for potential bone tissue engineering[J]. Materials Science and Engineering:C,2019,10:110054. [89] 焦晨. DLP光固化成形晶格单元结构氧化锆陶瓷性能研究[D]. 南京:南京航空航天大学,2019. JIAO Chen. Study on properties of lattice zirconia structures prepared via DLP method[D]. Nanjing:Nanjing University of Aeronautics and Astronautics,2019. [90] XU Fangfang,REN Hui,ZHENG Mingjie,et al. Development of biodegradable bioactive glass ceramics by DLP printed containing EPCs/BMSCs for bone tissue engineering of rabbit mandible defects[J]. Journal of the Mechanical Behavior of Biomedical Materials,2020,103:103532. [91] TIAN Zhuo,YANG Yuping,WANG Yong,et al. Fabrication and properties of a high porosity h-BN-SiO2 ceramics fabricated by stereolithography-based 3D printing[J]. Materials Letters,2019,236:144-147. [92] XING Bohang,CAO Chuanru,ZHAO Weiming,et al. Dense 8 mol% yttria-stabilized zirconia electrolyte by DLP stereolithography[J]. Journal of the European Ceramic Society,2020,40(4):1418-1423. [93] CHABOK H,CHI Z,YONG C,et al. Ultrasound Transducer Array Fabrication Based on Additive Manufacturing of Piezocomposites[C]//ASME/ISCIE 2012 International Symposium on Flexible Automation. St. louis:American Society of Mechanical Engineers,2012,433-444. [94] LI Shan,DUAN Wenyan,ZHAO Tong,et al. The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology[J]. Journal of the European Ceramic Society,2018,38(14):4597-4603. [95] SCHMIDT J,COLOMBO P. Digital light processing of ceramic components from polysiloxanes[J]. Journal of the European Ceramic Society,2018,38(1):57-66. [96] CHEN Jiangshan,WANG Yuanjie,PEI Xueliang,et al. Preparation and stereolithography of SiC ceramic precursor with high photosensitivity and ceramic yield[J]. Ceramics International,2020,46(9):13066-13072. [97] HE Rujie,DING Guojiao,ZHANG Keqiang,et al. Fabrication of SiC ceramic architectures using stereolithography combined with precursor infiltration and pyrolysis[J]. Ceramics International,2019,45(11):14006-14014. |
[1] | 朱东彬, 吴民强, 王竹贤, 杨伟东. 基于微滴喷射3D打印的纳米颗粒悬浮墨水稳定喷射研究[J]. 机械工程学报, 2020, 56(9): 243-251. |
[2] | 高炼玲, 余圣甫, 禹润缜, 何天英, 史玉升. 5356铝合金过渡端框电弧增材制造及组织与性能[J]. 机械工程学报, 2020, 56(8): 28-36. |
[3] | 葛福国, 彭倍, 柯文超, 敖三三, 从保强, 祁泽武, 曾志. 电弧增材制造NiTi形状记忆合金成形与性能[J]. 机械工程学报, 2020, 56(8): 99-106. |
[4] | 李文涛, 周正干. 激光增材制造钛合金构件的阵列超声检测方法研究[J]. 机械工程学报, 2020, 56(8): 141-147. |
[5] | 李淳, 王志权, 司晓庆, 亓钧雷, 冯吉才, 曹健. 轻质金属与陶瓷连接研究综述[J]. 机械工程学报, 2020, 56(6): 73-84. |
[6] | 罗云, 胡胜鹏, 李子寒, 许志泉, 张雷, 宋晓国, 张丽霞. Ag-CuO钎料空气反应钎焊AlN陶瓷接头组织及性能[J]. 机械工程学报, 2020, 56(6): 95-101. |
[7] | 史玉升, 伍宏志, 闫春泽, 杨潇, 陈道兵, 张策, 苏彬, 宋波, 李中伟, 庞盛永, 文世峰, 梁波, 赵清亮, 贺健康, 张述泉, 温银堂. 4D打印——智能构件的增材制造技术[J]. 机械工程学报, 2020, 56(15): 1-25. |
[8] | 徐雪杰, 朱子才, 罗斌, 何青松. CNT/PDMS柔性传感材料的打印工艺及性能研究[J]. 机械工程学报, 2020, 56(15): 97-103. |
[9] | 方学伟, 白浩, 姚云飞, 张丽娟, 卢秉恒. 冷金属过渡电弧增材制造多道搭接工艺研究[J]. 机械工程学报, 2020, 56(1): 141-147. |
[10] | 刘小栋, 连芩, 李涤尘, 曹毅, 伍尚华, 武向权, 孟佳丽, 何晓宁. 基于氧阻聚效应的陶瓷面成形工艺优化研究[J]. 机械工程学报, 2019, 55(9): 224-232. |
[11] | 陈嵩涛, 段庆林, 王依宁, 李书卉, 李锡夔. 选区激光烧结过程传热分析的高效无网格法[J]. 机械工程学报, 2019, 55(7): 135-146. |
[12] | 罗怡, 朱亮, 韩静韬, 许洁, 张成洋. 电弧填丝增材制造过程熔滴射滴过渡特征及其对熔滴沉积成形的影响[J]. 机械工程学报, 2019, 55(3): 219-225. |
[13] | 王忠睿, 苗恺, 朱伟军, 李涤尘. 基于立体光固化3D打印的一体化石膏铸型的高温力学性能研究[J]. 机械工程学报, 2019, 55(23): 182-188. |
[14] | 许权, 兰红波, 赵佳伟, 杨昆, 朱晓阳. 基于电场驱动熔融沉积直写和微转印大面积透明电极制造[J]. 机械工程学报, 2019, 55(23): 216-225. |
[15] | 刘伟, 李能, 周标, 张国栋, 梁家誉, 郑涛, 熊华平. 复杂结构与高性能材料增材制造技术进展[J]. 机械工程学报, 2019, 55(20): 128-151,159. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||