[1] WU J N,LI J L,YAN S Z. Design of deployable bistable structures for morphing skin and its structural optimization[J]. Engineering Optimization,2014,46(6):745-762. [2] ZHANG Y,ZHAO J,CHEN W,et al. Biomimetic skeleton structure of morphing nose cone for aerospace vehicle inspired by variable geometry mechanism of honeybee abdomen[J]. Aerospace Science and Techndgy,2019,92:405-416. [3] 周丹杰. 空天飞行器气动外形构想[J]. 飞航导弹,2005(6):31-33. ZHOU Danjie. Aerodynamic configuration of aerospace vehicle[J]. Aerodynamic Missile Journal,2005(6):31-33. [4] ELLINGTON C P. The novel aerodynamics of insect flight:Applications to micro-air vehicles[J]. Journal of Experimental Biology,1999,202:3439-3448. [5] 许云涛. 智能变形飞行器发展及关键技术研究[J]. 战略导弹技术,2017(2):26-33. XU Yuntao. Research on the development and key technology of smart morphing aircraft[J]. Tactical Missile Technology,2017(2):26-33. [6] OLYMPIO K R,GANDHI F. Skin designs using multi-objective topology optimization[C]//49th AIAA/ASME/ASCE/AHS/ASC Structures,Structural Dynamics,and Materials Conference,AIAA,April 7-10,2008,Schaumburg,IL,2008:1-26. [7] CHEN Y J,YIN W L,LIU Y J,et al. Structural design and analysis of morphing skin embedded with pneumatic muscle fibers[J]. Smart Materials and Structures,2011,20(8):1-8. [8] BARBARINO S,GANDHI F,WEBSTER S D. Design of extendable chord sections for morphing helicopter rotor blades[J]. Journal of Intelligent Material Systems and Structures,2011,22(9):891-905. [9] BYE D R,MCCLURE P D. Design of a morphing vehicle[C]//48th AIAA/ASME/ASCE/AHS/ASC Struc-tures,Structural Dynamics,and Materials Conference,AIAA,April 23-26,2007,Honolulu,Hawall,2007:1-16. [10] ABDULRAHIM M,LIND R. Control and Simulation of a multi-role morphing micro air vehicle[C]//AIAA Guidance,Navigation,and Control Conference and Exhibit,April 15-18,2005,San Francisco,California,2005:1-19. [11] 桑为民,陈年旭. 变体飞机的研究进展及其关键技术[J]. 飞行力学,2009,27(6):5-9. SANG Weimin,CHEN Nianxu. Development and key technologies of the morphing aircraft[J]. Flight Dynamics,2009,27(6):5-9. [12] LI J L,WU J N,YAN S Z. Conceptual design of deployment structure of morphing nose cone[J]. Advances in Mechanical Engineering,2013,5:1-7. [13] ZHAO J L,YAN S Z,WU J N. Critical structure for telescopic movement of honey bee (Insecta:Apidae) abdomen:Folded intersegmental membrane[J]. Journal of Insect Science,2016,16(1):1-8. [14] ZHAO J L,WU J N,YAN S Z. Movement analysis of flexion and extension of honeybee abdomen based on an adaptive segmented structure[J]. Journal of Insect Science,2015,15(1):1-6. [15] ZHAO J L,YAN S Z,DENG L R,et al. Design and analysis of biomimetic nose cone for morphing of aerospace vehicle[J]. Journal of Bionic Engineering,2017,14(2):317-326. [16] 果晓东,李君兰,陈炜铧,等. 基于伞式导杆机构的变体头锥设计与仿真[J]. 光学精密工程,2018,26(2):336-343. GUO Xiaodong,LI Junlan,CHEN Weihua,et al. Design and simulation of morphing nose cone for umbrella guide-rod mechanism[J]. Optics and Precision Engineering,2018,26(2):336-343. [17] DRAGOMIR C T. On the nature of the forces acting between myofilaments in resting state and under contraction[J]. Journal of Theoretical Biology,1970,27(3):343-356. [18] DASGUPTA B,MRUTHYUNJAYA T S. The Stewart platform manipulator:A review[J]. Mechanism and Machine Theory,2000,35(1):15-40. [19] 李秦川. 对称少自由度并联机器人型综合理论及新机型综合[D]. 秦皇岛:燕山大学,2003. LI Qinchuan. Type synthesis theory of lower-mobility parallel mechanisms and synthesis of new architectures[D]. Qinhuangdao:Yanshan University,2003. [20] HUANG Z,LI Q C. Construction and kinematic pro-perties of 3-UPU parallel mechanisms[C]//Proceedings of DETC'02 ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference,September 29-October 2,2007,Montreal,Canada,2007:1027-1033. [21] 赵燕,黄真. 3-RPS并联机构的主动力和约束力分析[J]. 燕山大学学报,2008,32(4):299-339. ZHAO Yan,HUANG Zhen. Analysis of active force and constraint force reactions of 3-RPS parallel manipulator[J]. Journal of Yanshan University,2008,32(4):299-339. [22] 邓宗全. 空间折展机构设计[M]. 哈尔滨:哈尔滨工业大学出版社,2013. DENG Zongquan. Design of space deployable and foldable mechanism[M]. Harbin:Harbin Institute of Technology Press,2013. [23] 李树军,王洪光,戴建生. 变胞机构的等效阻力梯度模型及其设计方法[J]. 机械工程学报,2014,50(1):18-23. LI Shujun,WANG Hongguang,DAI Jiansheng. The equivalent resistance gradient model of metamorphic mechanisms and the design method[J]. Journal of Mechanical Engineering,2014,50(1):18-23. [24] 王德伦,戴建生. 变胞机构及其综合的理论基础[J]. 机械工程学报,2007,43(8):32-42. WANG Delun,DAI Jiansheng. Theoretical foundation of metamorphic mechanism and its synthesis[J]. Chinese Journal of Mechanical Engineering,2007,43(8):32-42. |