Skip to main content

CORRECTION article

Front. Chem., 03 July 2023
Sec. Polymer Chemistry
Volume 11 - 2023 | https://doi.org/10.3389/fchem.2023.1241556

Corrigendum: Tough materials through ionic interactions

  • 1Department of Chemistry, University of Helsinki, Helsinki, Finland
  • 2VTT Technical Research Centre of Finland Ltd., Espoo, Finland

A Corrigendum on
Tough materials through ionic interactions

by Salminen L, Karjalainen E, Aseyev V and Tenhu H (2021). Front. Chem. 9:721656. doi: 10.3389/fchem.2021.721656

In the published article, there was an error in Figures 11, 12. The order of magnitude was incorrect in Figures 11A, D and Figures 12A, D. The correct figures and their captions appear below.

In the published article, there was an error in Supplementary Figure S20, which had incorrect dimensions. The correct figure and its caption appear below.

FIGURE 11
www.frontiersin.org

FIGURE 11. The ion content dependence of (A) Young’s modulus, (B) stress at break, (C) strain at break, and (D) fracture energy (WB) of C4ASA-films with 1% (blue), 2% (black), and 5% (red) BudMA. The fracture energies were defined as the integrals of stress-strain curves.

FIGURE 12
www.frontiersin.org

FIGURE 12. The ion content dependence of (A) the Young’s modulus, (B) the stress at break, (C) the strain at break, and (D) the fracture energy (WB) of films with 2% BudMA and varying concentrations of C4ASA (black) or C6ASA (red). The fracture energies were defined as the integrals of stress-strain curves.

SUPPLEMENTARY FIGURE S20
www.frontiersin.org

SUPPLEMENTARY FIGURE S20. The Young’s moduli (A), stresses at break (B), strains at break (C), and fracture energies (D) of films with 5% of C4ASA, C6ASA, or PC6ASA. Each film contains 2% BudMA.

The authors apologize for these errors and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: photopolymerization, dynamic crosslinker, crosslinking, reinforcement, tensile strength

Citation: Salminen L, Karjalainen E, Aseyev V and Tenhu H (2023) Corrigendum: Tough materials through ionic interactions. Front. Chem. 11:1241556. doi: 10.3389/fchem.2023.1241556

Received: 16 June 2023; Accepted: 20 June 2023;
Published: 03 July 2023.

Edited and reviewed by:

Maria Vamvakaki, University of Crete, Greece

Copyright © 2023 Salminen, Karjalainen, Aseyev and Tenhu. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Erno Karjalainen, erno.karjalainen@alumni.helsinki.fi; Vladimir Aseyev, vladimir.aseyev@helsinki.fi

Download