EXOSEKETONS: A REHAB TECH CONSUMER’S UNEXPECTED MARCH TO ACTION
DOI:
https://doi.org/10.33137/cpoj.v4i2.37250Keywords:
Disability, Rehabilitation, Ankle Foot Orthotics, Designer, Fashion, Handicap, ExoskeletonAbstract
This paper is both a stakeholder perspectives as well as a ‘case study’ describing a journey from sudden disability to participant and investor in exoskeleton design. It tells of my experiences and opinions, as a successful fashion designer, when my life took a drastic turn on becoming paralysed from the waist down over the course of 24 hours, by a spinal tumour. Getting this diagnosis was ‘the worst day in my life’, and it was quickly followed by the ‘second worst’ when, in my determination to walk again, I received Knee Ankle Foot Orthotics (KAFOs) and was shocked to learn that this appeared to be the best technology solution available on the market ‘suitable’ for use in the community. Initial anger at the system for not being better, at the rehab team for their complacency, and at myself for allowing a feeling of helplessness to take over led to questions such as: what does this say about our society? and what are we all willing to accept, for ourselves and others? This is professional opinion and an essay about how we see ourselves and how others see us. The journey from pre-injury ‘consumer’ to post-injury ‘disabled’ person and learning that being labeled ‘disabled’ leads to the additional handicap of the narrow vision of “cost” taken by the mobility industry where innovative ideas are stripped down to the bare minimum with the excuse that patients are “lucky” to have what they have been “given”. Grappling with these labels and inequities and seeking a better outcome, I became an integral team member of an exoskeleton development team, leading to the design of The Next Generation Exoskeleton! This is MY story, the story of Chloe Angus. It is the story of inclusive, user focused design and is a call to include and respect the end users of all assistive device technology design early in the design process and it is being told from the perspective of a person having experience and success in the world of business.
Article PDF Link: https://jps.library.utoronto.ca/index.php/cpoj/article/view/37250/28296
How To Cite: Angus C. Exoseketons: a rehab tech consumer’s unexpected march to action. Canadian Prosthetics & Orthotics Journal. 2021; Volume 4, Issue 2, No.2. https://doi.org/10.33137/cpoj.v4i2.37250
Corresponding Author: Chloe Angus
Chloe Angus Design, Vancouver, BC, Canada.
E-Mail: chloe@chloeangus.com
ORCID ID: https://orcid.org/0000-0002-5468-3121
Downloads
References
Jankowski N, Schönijahn L, Salchow C, Ivanova E, Wahl M. User-centred design as an important component of technological development. Curr Dir Biomed Eng. 2017;3(1): 69-73. DOI:10.1515/cdbme-2017-0015
Sadeqi S, Bourgeois S, Park E, Arzanpour S. Design and performance analysis of a 3- R RR spherical parallel manipulator for hip exoskeleton applications. RATE. 2017; 5(4). DOI:10.1177/2055668317697596
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Chloe Angus
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles are permanently available online to the public without restrictions or subscription fees. All articles are free to be used, cited, and distributed, on condition that appropriate acknowledgment is included. Authors are the copyright holders of their original contributions. The published article is simultaneously licensed under a Creative Commons (CC) Attribution License. “A CC license is used when an author wants to give people the right to share, use, and build upon a work that they have created” Wikipedia.