Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

The role of surface polymer compability in the formation of fiber/fiber bonds in paper

  • Robert Pelton , Jin Zhang , Lars Wågberg and Mats Rundlöf
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2000-15-05-p400-406
Keywords: Polymer compatibility; Surface properties of fiber; Tensile strength; Page equation; Strength enhancing polymer; Dextran
Published Online: 2018-07-19
Published in Print: 2000-12-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 15 Issue 5
Submit manuscript

Journal and Issue

Articles in the same Issue

Lightweight, high-opacity paper by fiber loading: filler comparison
An investigation of the friction properties of coated paper
Orientation of talc particles in dispersion coatings
A titration microcalorimetry study of the interactions between poly(vinyl alcohol) and coating colour minerals
Ozone-oxidized POTATO AMYLOPECTIN (PAP) starch as a cobinder in paper-coating: Impact on flow behaviour and coating layer properties
Two phase flows under the coating blade
Interactions between ground calcium carbonate pigments and polymer latices
Kinetics of the flocculation of clay particles by polyethylene oxide (PEO) at temperatures above the PEO-water cloud point temperature
Novel cofactors/PEO flocculation systems for colloidal suspensions
The role of surface polymer compability in the formation of fiber/fiber bonds in paper
Dendrimers: A new retention aid for newsprint, mechanical printing grades, and board
Distribution characteristics of rosin size and their effect on the internal sizing of paper
Influence of inertia on liquid absorption into paper coating structures
Influence of latex surface properties on interactions with starch and carboxymethyl cellulose in coating colours
The effect of charge density and hydrophobic modification on dextran-based paper strength enhancing polymers
The effect of recycling procedures of papermaking fibres and fines on the adsorption of cationic polyacrylamide
Mechanism of internal sizing by alkyl ketene dimers (AKD): The role of the spreading monolayer precursor and autophobicity
Surface and friction forces between cellulose surfaces measured with colloidal probe microscopy
Release of organic substances from bleached sulphate pulps during slushing and refining
Computer modelling of fluid permeation in porous coatings and paper – an overview
A method for measuring and controlling the pressure in the metering nip of a metering size press coating process
A model for the adsorption of polyelectrolytes on pulp fibers: Relation between fiber structure and polyelectrolyte properties
Apparent slip velocity of paper coatings in viscometric flows
Runnability and flow-induced aggregation of paper coating suspensions
Mechanism of polyacrylamide-bentonite – microparticulate retention aids
Studies on topochemical modification of cellulosic fibres
Separation of off-set ink components during absorption into pigment coating structures
Design and development of the micropolymer system: An “organic microparticle” retention/drainage system
Reversibility of polymer-induced fiber flocculation by shear. 1. Experimental methods
Droplet penetration into porous networks: Role of pore morphology
Pigmented latex coatings: Microstructure and viscoelastic mechanical properties
Flocculation of PCC induced by polymer/microparticle systems: Floc characteristics
Spectroscopic methods for determination of latex content of coating layers
Polyelectrolyte adsorption onto cellulose fibres – A review
Spreading of droplets of different liquids on specially structured papers
Effects of wood polysaccharides on pitch deposition
Downloaded on 11.5.2024 from https://www.degruyter.com/document/doi/10.3183/npprj-2000-15-05-p400-406/html
Scroll to top button