Abstract
The biocomposites of poly (lactic acid) (PLA) involving 15 % mass fraction of calcium sulfate whiskers (CSW) were prepared via melt-blending technology, in an effort of toughening PLA and enhancing the thermal stability. The morphological structure, impact toughness, thermal stability as well as kinetic analysis on thermal decomposition for PLA/CSW composites were performed thoroughly. The results showed that CSW was organized successfully via silanization, helping to form well-bonded interfaces, and accordingly, the impact toughness increased remarkably. The thermal stability was enhanced by adding whiskers, leading to increased decomposition temperature and decreased mass conversion rate. Kinetic analysis revealed the great dispersions on the reaction order and activation energy. Though, in comparison to pure PLA, the reaction order of PLA/CSW composites increased based on calculation methods except for Carrasco's, the activation energy of the composites declined independently of the applied mathematical models, meaning that thermal decomposition of PLA phase was accelerated by the introduced CSW.
References
Arrieta, M. P., López, J., Ferrándiz, S. and Peltzer, M. A., “Characterization of PLA-Limonene Blends for Food Packaging Applications”, Polym. Test., 32, 760–768 (2013) 10.1016/j.polymertesting.2013.03.016Search in Google Scholar
Babanalbandi, A., Hill, D. J., Hunter, S. and Kettle, L., “Thermal Stability of Poly(lactic acid) before and after G-Radiolysis”, Polym. Int., 48, 980–984 (1999) 10.1002/(SICI)1097-0126(199910)48:10<980::AID-PI257>3.0.CO;2-BSearch in Google Scholar
Cam, D., Marucci, M., “Influence of Residual Monomers and Metals on Poly(-lactide) Thermal Stability”, Polymer, 38, 1879–1884 (1997) 10.1016/S0032-3861(96)00711-2Search in Google Scholar
Carothers, W. H., Dorough, G. L. and Van Natta, F. J., “Studies of Polymerization and Ring Formation. X. The Reversible Polymerization of Six-Membered Cyclic Esters”, J. Am. Chem. Soc., 54, 761–772 (1932) 10.1021/ja01341a046Search in Google Scholar
Carrasco, F., Gamez-Perez, J., Santana, O. O. and Maspoch, M. L., “Processing of Poly(lactic acid)/Organomontmorillonite Nanocomposites: Microstructure, Thermal Stability and Kinetics of the Thermal Decomposition”, Chem. Eng. J., 178, 451–460 (2011) 10.1016/j.cej.2011.10.036Search in Google Scholar
Chen, R. Y., Zou, W., Wu, C. R., Jia, S. K., Huang, Z., Zhang, G. Z., Yang, Z. T. and Qu, J. P., “Poly(lactic acid)/Poly(butylene succinate)/Calcium Sulfate Whiskers Biodegradable Blends Prepared by Vane Extruder: Analysis of Mechanical Properties, Morphology, and Crystallization Behavior”, Polym. Test., 34, 1–9 (2014) 10.1016/j.polymertesting.2013.12.009Search in Google Scholar
Chrissafis, K., “Detail Kinetic Analysis of the Thermal Decomposition of PLA with Oxidized Multi-Walled Carbon Nanotubes”, Thermochim. Acta, 511, 163–167 (2010) 10.1016/j.tca.2010.08.009Search in Google Scholar
Coats, A. W., Redfern, J. P., “Kinetic Parameters from Thermogravimetric Data”, Nature, 201, 68–69 (1964) 10.1038/201068a0Search in Google Scholar
De Palma, R., Peeters, S., Van Bael, M. J., Van Den Rul, H., Bonroy, K., Laureyn, W., Mullens, J., Borghs, G. and Maes, G., “Silane Ligand Exchange to Make Hydrophobic Superparamagnetic Nanoparticles Water-Dispersible”, Chem. Mater., 19, 1821–1831 (2007) 10.1021/cm0628000Search in Google Scholar
Fan, Y., Nishida, H., Shirai, Y., Tokiwa, Y. and Endo, T., “Thermal Degradation Behaviour of Poly(lactic acid) Stereocomplex”, Polym. Degrad. Stab., 86, 197–208 (2004) 10.1016/j.polymdegradstab.2004.03.001Search in Google Scholar
Feng, Y. L., Yin, J. H., Jiang, W. and Zhao, G. Y., “Properties of Poly(lactic acid) Toughened by Epoxy-Functionalized Elastomer (in Chinese)”, Chem. J. Chin. Univ., 33, 400–403 (2012) 10.3969/j.issn.0251-0790.2012.02.033Search in Google Scholar
Freeman, E. S., Carroll, B., “Interpretation of the Kinetics of Thermogravimetric Analysis”, J. Phys. Chem., 73, 751–752 (1969) 10.1021/j100723a050Search in Google Scholar
Ho, C. H., Wang, C. H., Lin, C. I. and Lee, Y. D., “Synthesis and Characterization of TPO-PLA Copolymer and its Behavior as Compatibilizer for PLA/TPO Blends”, Polymer, 49, 3902–3910 (2008) 10.1016/j.polymer.2008.06.054Search in Google Scholar
Hong, Z. K., Zhang, P. B., He, C. L., Qiu, X. Y., Liu, A. X., Chen, L., Chen, X. S. and Jing, X. B., “Nano-Composite of Poly(l-lactide) and Surface Grafted Hydroxyapatite: Mechanical Properties and Biocompatibility”, Biomaterials, 26, 6296–6304 (2005)PMid:15913758; 10.1016/j.biomaterials.2005.04.018Search in Google Scholar
Hu, R. Z., Shi, Q. Z.: Thermokinetic Analysis [M] (in Chinese), Science Press, Beijing, p. 10–15 (2008)Search in Google Scholar
Jenck, J. F., Agterberg, F. and Droescher, M. J., “Products and Processes for a Sustainable Chemical Industry: A Review of Achievements and Prospects”, Green Chem., 6, 544–556 (2004) 10.1039/b406854hSearch in Google Scholar
Jiang, L., Wolcott, M. P. and Zhang, J., “Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends”, Biomacromolecules, 7, 199–207 (2006)PMid:16398516; 10.1021/bm050581qSearch in Google Scholar
Khawam, A., Flanagan, D. R., “Solid-State Kinetic Models: Basics and Mathematical Fundamentals”, J. Phys. Chem. B, 110, 17315–17328 (2006)PMid:16942065; 10.1021/jp062746aSearch in Google Scholar
Kim, H., Abdala, A. A. and Macosko, C. W., “Graphene/Polymer Nanocomposites”, Macromolecules, 43, 6515–6530 (2010) 10.1021/ma100572eSearch in Google Scholar
Kissinger, H. E., “Reaction Kinetics in Differential Thermal Analysis”, Anal. Chem., 29, 1702–1706 (1957) 10.1021/ac60131a045Search in Google Scholar
Kopinke, F. D., Remmler, M., Mackenzie, K., Moder, M. and Wachsen, O., “Thermal Decomposition of Biodegradable Polyesterse-II. Poly(lactic acid)”, Polym. Degrad. Stab., 52, 329–342 (1996) 10.1016/0141-3910(95)00221-9Search in Google Scholar
Kummerer, K., “Sustainable from the Very Beginning: Rational Design of Molecules by Life Cycle Engineering as an Important Approach for Green Pharmacy and Green Chemistry”, Green Chem., 9, 899–907 (2007) 10.1039/b618298bSearch in Google Scholar
Li, D., Teoh, W. Y., Gooding, J. J., Selomulya, C. and Amal, R., “Functionalization Strategies for Protease Immobilization on Magnetic Nanoparticles”, Adv. Funct. Mater., 20, 1767–1777 (2010) 10.1002/adfm.201000188Search in Google Scholar
Li, Y., Shimizu, H., “Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)Urethane Elastomer”, Macromol. Biosci., 7, 921–928 (2007)PMid:17578835; 10.1002/mabi.200700027Search in Google Scholar PubMed
Liang, J. Z., Duan, D. R., Tang, C. Y., Tsui, C. P., Chen, D. Z. and Zhang, S. D., “Mechanical Properties and Morphology of Poly(l-lactic acid)/Nano-Caco3 Composites”, J. Polym. Environ., 2015, 23: 21–29 (2015) 10.1007/s10924-014-0661-zSearch in Google Scholar
Liu, J. Y., Ren, L., Wie, Q., Wu, J. L., Liu, S., Wang, Y. J. and Li, G. Y., “Fabrication and Characterization of Polycaprolactone/Calcium Sulfate Whisker Composites”, Express Polym. Lett., 5, 742–752 (2011) 10.3144/expresspolymlett.2011.72Search in Google Scholar
Liu, J. Y., Ren, L., Wie, Q., Wu, J. L., Liu, S., Wang, Y. J. and Li, G. Y., “Microstructure and Properties of Polycaprolactone/Calcium Sulfate Particle and Whisker Composites”, Polym. Compos., 33, 501–508 (2012) 10.1002/pc.22171Search in Google Scholar
Liu, X., Zou, Y., Li, W., Cao, G. and Chen, W., “Kinetics of Thermo-Oxidative and Thermal Degradation of Poly(d, l-lactide) (PDLLA) at Processing Temperature”, Polym. Degrad. Stab., 91, 3259–3265 (2006) 10.1016/j.polymdegradstab.2006.07.004Search in Google Scholar
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F. and Nava-Saucedo, J. E., “Polymer Biodegradation: Mechanisms and Estimation Techniques. Chemosphere”, 73, 429–442 (2008)PMid:18723204; 10.1016/j.chemosphere.2008.06.064Search in Google Scholar PubMed
Mohamed, A., Gordon, S. and Biresaw, G., “Poly(lactic acid)/Polystyrene Bioblends Characterized by Thermogravimetric Analysis, Differential Scanning Calorimetry, and Photoacoustic Infrared Spectroscopy”, J. Appl. Polym. Sci., 106, 1689–1696 (2007) 10.1002/app.26783Search in Google Scholar
Murariu, M., Bonnaud, L., Yoann, P., Fontaine, G., Bourbigot, S. and Dubois, P., “New Trends in Polylactide (PLA)-Based Materials: “Green” PLA-Calcium Sulfate (Nano)Composites Tailored with Flame Retardant Properties”, Polym. Degrad. Stab., 95, 374–381 (2010) 10.1016/j.polymdegradstab.2009.11.032Search in Google Scholar
Murariu, M., Dubois, P., “PLA Composites: From Production to Properties” Adv. Drug Delivery Rev., 105, 17–46 (2016)PMid:27085468; 10.1016/j.addr.2016.04.003Search in Google Scholar PubMed
Murariu, M., Ferreira, A. D. S., Degée, P., Alexandre, M. and Du-bois, P., “Polylactide Compositions. Part 1: Effect of Filler Content and Size on Mechanical Properties of PLA/Calcium Sulfate Composites”, Polymer, 48, 2613–2618 (2007) 10.1016/j.polymer.2007.02.067Search in Google Scholar
Nampoothiri, K. M., Nair, N. R. and Jonh, R. P., “An Overview of the Recent Developments in Polylactide (PLA) Research”, Bioresour. Technol., 101, 8493–8501 (2010)PMid:20630747; 10.1016/j.biortech.2010.05.092Search in Google Scholar PubMed
Oyama, H. T., “Super-Tough Poly(lactic acid) Materials: Reactive Blending with Ethylene Compolymer”, Polymer, 50, 747–751 (2009) 10.1016/j.polymer.2008.12.025Search in Google Scholar
Qin, J., Shi, W. J., Yang, H. Y., Liu, J., Yu, J., Lv, Q. and Tiao, Y. Z., “Sonochemical Activation Calcium Sulfate Whisker with Enhanced Beta-Nucleating Ability for Isotactic Polypropylene”, Colloid. Polym. Sci., 291, 2579–2587 (2013) 10.1007/s00396-013-3004-zSearch in Google Scholar
Raquez, J. M., Habibi, Y., Murariu, M. and Dubois, P., “Polylactide (PLA)-Based Nanocomposites”, Prog. Polym. Sci., 38, 1504–1542 (2013) 10.1016/j.progpolymsci.2013.05.014Search in Google Scholar
Rasal, R. M., Janorkar, A. V. and Hirt, D. E., “Poly(lactic acid) Modifications”, Prog. Polym. Sci., 35, 338–356 (2010) 10.1016/j.progpolymsci.2009.12.003Search in Google Scholar
Su, Z. Z., Li, Q. Y., Liu, Y. J., Hu, G. H., Wu, C. F., “Compatibility and Phase Structure of Binary Blends of Poly(lactic acid) and Glycidyl Methacrylate Grafted Poly(ethylene octane)”, Eur. Polym. J., 45, 2428–2433 (2009) 10.1016/j.eurpolymj.2009.04.028Search in Google Scholar
Sun, S. L., Zhang, M. Y., Zhang, H. X. and Zhang, X. M., “Polylactide Toughening with Epoxy-Functionalized Grafted Acrylonitrile-Butadiene-Styrene Particles”, J. Appl. Polym. Sci., 122, 2992–2999 (2011) 10.1002/app.34111Search in Google Scholar
Tudorachi, N., Lipsa, R. and Mustata, F. R., “Thermal Degradation of Carboxymethyl Starch-G-Poly(lactic acid) Copolymer by TG-FTIR-MS Analysis”, Ind. Eng. Chem. Res., 51, 15537–15545 (2012) 10.1021/ie300625cSearch in Google Scholar
Wachsen, O., Platkowski, K. and Reichert, K. H., “Thermal Degradation of Poly-L-Lactide Studies on Kinetics, Modelling and Melt Stabilisation”, Polym. Degrad. Stab., 57, 87–94 (1997) 10.1016/S0141-3910(96)00226-1Search in Google Scholar
Wang, J. C., Tang, L. J., Wu, D., Guo, X. and HaoW. L., “Application of Modified Calcium Sulfate Whisker in Methyl Vinyl Silicone Rubber Composites”, Polym. Polym. Compos., 20, 453–461 (2012) 10.1177/096739111202000505Search in Google Scholar
Wang, J. C., Yang, K. and Lu, S. J., “Preparation and Characterization of Novel Silicone Rubber Composites Based on Organophilic Calcium Sulfate Whisker”, High Perform. Polym., 23, 141–150 (2011) 10.1177/0954008310395415Search in Google Scholar
Wang, R., Wang, S., Zhang, Y., Wan, C. and Ma, P., “Toughening Modification of PLLA/PBS Blends via in situ Compatibilization”, Polym. Eng. Sci., 49, 26–33 (2009) 10.1002/pen.21210Search in Google Scholar
Wang, X. L., Zhu, Y. M., Han, Y. X. and Yuan, Z. T., “Toughening of Calcium Sulfate Whisker-PP Composites by Surface Treatment Agents” (in Chinese), J. Northeastern Univ. (Nat. Sci.), 29(10), 1494–1497 (2008a)Search in Google Scholar
Wang, Y., Steinhoff, B., Brinkmann, C., Alig, I., “In-Line Monitoring of the Thermal Degradation of Poly(l-lactic acid) during Melt Extrusion by UV–Vis Spectroscopy”, Polymer, 49, 1257–1265 (2008b) 10.1016/j.polymer.2008.01.010Search in Google Scholar
Wang, Y. Q., Li, Y. C., Yuan, A., Yuan, B., Lei, X. R., Ma, Q., Han, J., Wang, J. X. and Chen, J. Y., “Preparation of Calcium Sulfate Whiskers by Carbide Slag through Hydrothermal Method”, Cryst. Res. Technol., 49, 800–807 (2014) 10.1002/crat.201400155Search in Google Scholar
Wu, L. B., Cao, D., Huang, Y. and Li, B. G., “Poly(l-lactic acid)/SiO2 Nanocomposites via in situ Melt Polycondensation of L-Lactic Acid in the Presence of Acidic Silica Sol: Preparation and Characterization”, Polymer, 49, 742–748 (2008) 10.1016/j.polymer.2007.12.019Search in Google Scholar
Yang, J. N., Nie, S. B., “Effects of Calcium Sulfate Whisker on the Mechanical Property, Morphological Structure and Thermal Degradation of Poly(lactic acid) Composites”, Polym. Degrad. Stab., 144, 270–280 (2017) 10.1016/j.polymdegradstab.2017.08.031Search in Google Scholar
Yuzay, I. E., Auras, R., Soto-Valdez, H. and Selke, S., “Effects of Synthetic and Natural Zeolites on Morphology and Thermal Degradation of Poly(lactic acid) Composites”, Polym. Degrad. Stab., 95, 1769–1777 (2010) 10.1016/j.polymdegradstab.2010.05.011Search in Google Scholar
Zhou, J., “Property and Microstructure of ABS Composite Modified with Salt Sulfate Whisker (in Chinese)”, CIESC J., 61, 243–248 (2010)Search in Google Scholar
Zhu, Z. C., Xu, L. and Chen, G. A., “Effect of Different Whiskers on the Physical and Tribological Properties of Non-Metallic Friction Materials”, Mater. Des., 32, 54–61 (2011) 10.1016/j.matdes.2010.06.037Search in Google Scholar
© 2019, Carl Hanser Verlag, Munich