Abstract
An intermeshing co-rotating twin-screw extruder is widely used for producing polymer composites. In order to satisfy properties of the composites, it is important to understand mixing performance of segments. In this study, we discussed mixing performance of special rotor segments commercially named VCMT (various clearance mixing technology) by using a numerical analysis method. The several tip clearances of VCMT work for achievement of both self-cleaning and effective mixing. We adopted a particle tracking method to obtain the following two evaluation indices; 1) residence time for the evaluation of its uniformity and 2) maximum 1st principal stress for the evaluation of dispersive mixing. And we evaluated mixing performance of VCMT by using probability distributions of each index. Moreover, we proposed weighted probability distributions as theoretically better evaluation. The probability distributions of VCMT were compared with those of two kinds of kneading disk segments (KDs). From the comparison, it was found that the probability of VCMT in large 1st principal stress region is higher than those of KDs. As a conclusion, VCMT has better mixing performance than KDs for the geometries and operating conditions that were investigated.
References
Avalosse, T., Rubin, Y., “Analysis of Mixing in Corotating Twin Screw Extruders through Numerical Simulation”, Int. Polym. Proc., 15, 117–123 (2000) 10.3139/217.1586Search in Google Scholar
Avalosse, T., Rubin, Y. and Fondin, L., “Non-Isothermal Modeling of Co-Rotation and Counter-Rotating Twin Screw Extruders”, J. Reinf. Plast. Compos., 21, 419–429 (2002) 10.1177/0731684402021005442Search in Google Scholar
Bravo, V. L., Hrymak, A. N. and Wright, J. D.: “Study of Particle Trajectories, Residence Times and Flow Behavior in Kneading Discs of Intermeshing Co-Rotating Twin-Screw Extruders”, Polym. Eng. Sci., 44, 779–793 (2004) 10.1002/pen.20841Search in Google Scholar
Cheng, H. F., Manas-Zloczower, I., “Distributive Mixing in Conveying Elements of a ZSK-53 Co-Rotating Twin Screw Extruder”, Polym. Eng. Sci., 38, 926–935 (1998) 10.1002/pen.10260Search in Google Scholar
Funatsu, K., KiharaS., Miyazaki, M., Katsuki, S. and Kajiwara, T., “3-D Numerical Analysis on the Mixing Performance for Assemblies with Filled Zone of Right-Handed and Left-Handed Double-Flighted Screws and Kneading Blocks in Twin-Screw Extruders”, Polym. Eng. Sci., 42, 707–723 (2002) 10.1002/pen.10983Search in Google Scholar
Ishikawa, T., Kihara, S. and Funatsu, K., “3-D Numerical Simulation of Non-Isothermal Flow in Co-Rotating Twin Screw Extruders”, Polym. Eng. Sci., 40, 357–364 (2000) 10.1002/pen.11169Search in Google Scholar
Inoue, K., “Improvement of Mixing Performance of Twin Screw Extruders by New Mixing Technology Named VCMT (in Japanese)”, Seikei Kakou (Journal of the Japan Society of Polymer Processing), 16, 510–511, (2004)Search in Google Scholar
Jonoobi, M., Harun, J., Mathew, A. P. and OksmanK., “Mechanical Properties of Cellulose Nanofiber (CNF) Reinforced Polylactic Acid (PLA) Prepared by Twin Screw Extrusion”, Compos. Sci. Tech., 70, 1742–1747 (2010) 10.1016/j.compscitech.2010.07.005Search in Google Scholar
Kalyon, D. M., Malik, M., “An Integrated Approach for Numerical Analysis of Coupled Flow and Heat Transfer in Co-Rotating Twin Screw Extruders”, Int. Polym. Proc., 3, 293–302 (2007) 10.3139/217.1020Search in Google Scholar
Kohlgruber, K.: Co-Rotating Twin-Screw Extruders, Hanser Publishers, Munich (2008)10.3139/9783446433410.fmSearch in Google Scholar
Lawal, A., Kalyon, D. M. and Ji, Z., “Computational Study of Chaotic Mixing in Co-Rotating Two-Tipped Kneading Paddles: Two-Dimensional Approach”, Polym. Eng. Sci., 33, 140–148 (1993) 10.1002/pen.760330304Search in Google Scholar
Lawal, A., Kalyon, D., “Mechanisms of Mixing in Single and Co-Rotating Twin Screw Extruders”, Polym. Eng. Sci., 35 (17) 1325–1338 (1995a) 10.1002/pen.760351702Search in Google Scholar
Lawal, A., Kalyon, D., “Simulation of the Intensity of Segregation Distributions Using Three-Dimensional FEM Analyses: Applications to Co-Rotating Twin Screw Extruders”, J. Appl. Polym. Sci., 58, 1501–1507 (1995b) 10.1002/app.1995.070580912Search in Google Scholar
Lawal, A., Kalyon, D., “Nonisothermal Extrusion Flow of Viscoplastic Fluids with Wall Slip”, Int. J. Heat Mass Transfer, 40, 3883–3897 (1997) 10.1016/S0017-9310(97)00016-1Search in Google Scholar
Malik, M., Kalyon, D. M. and GolbaJr., J. C., “Simulation of Co-Rotating Twin Screw Extrusion Process Subject to Pressure-Dependent Wall Slip at Barrel and Screw Surfaces: 3D FEM Analysis for Combinations of Forward- and Reverse-Conveying Screw Elements”, Int. Polym. Proc., 29, 51–62 (2014) 10.3139/217.2802Search in Google Scholar
Nakayama, Y., Takeda, E., Shigeishi, T., Tomiyama, H. and Kajiwara, T, “Melt-Mixing by Novel Pitched-Tip Kneading Disks in a Co-Rotating Twin-Screw Extruder”, Chem. Eng. Sci., 66, 103–110, (2010), DOI10.1016/j.ces2010.10.022Search in Google Scholar
Wei, J., Sun, Q., Sun, X. and Sun, W., “A Study on Rotor Profiles Design for a Novel Twin-Screw Kneader”, Int. J. Precis. Eng. Manuf., 14, 451–459 (2013) 10.1007/s12541-013-0061-7Search in Google Scholar
Yao, C. H., Manas-Zloczower, I., “Influence of Design on Dispersive Mixing Performance in an Axial Discharge Continuous Mixer – LCMAX 40”, Polym. Eng. Sci., 38, 936–946 (1998) 10.1002/pen.10261Search in Google Scholar
Zhang, X. M., Feng, L. F., Chen, W. X. and Hu, G. H., “Numerical Simulation and Experimental Validation of Mixing Performance of Kneading Discs in a Twin Screw Extruder”, Polym. Eng. Sci., 49, 1772–1782 (2009) 10.1002/pen.21404Search in Google Scholar
© 2015, Carl Hanser Verlag, Munich
