Abstract
The paper presents results of the wear behavior, as well as the microstructural (scanning and transmission electron microscopy) and compositional (microanalysis with using energy dispersive and X-ray photon emission spectroscopy) characterization of nanostructured Ni-20Sn (wt.%) coatings, deposited on an Inconel 718 substrate by supersonic cold gas spraying at different spraying parameters. Coatings were examined in the as-deposited state and after testing in a linearly reciprocating sliding wear test at room temperature, 200, 400 and 550 °C. It was found that the Ni–Sn coatings exhibit superior wear resistance compared to benchmark materials. This is attributed to an appropriate balance of soft (Ni) and to hard (Ni3Sn – intermetallic) phases and to the nanostructure of the matrix, as well as to the presence of an NiO oxide tribo-layer, as revealed by the microanalysis and electron microscopy.
References
[1] A.A.Voevodin, J.S.Zabinski, C.Muratore: Tsinghuna Sci. Technol.10 (2005) 665. 10.1016/S1007-0214(05)70135-8Search in Google Scholar
[2] S.Achanta, M.Feuerbacher, A.Grishin, X.Ye, J.-P.Celis: Intermetallics18 (2010) 2096. 10.1016/j.intermet.2010.06.016Search in Google Scholar
[3] M.Mohanty, R.W.Smith, M.De Bonte, J.-P.Celis, E.Lugscheider: Wear198 (1996) 251. 10.1016/0043-1648(96)06983-9Search in Google Scholar
[4] E.Vancoille, J.-P.Celis, J.R.Roos: Tribol. Int.26 (1993) 115. 10.1016/0301-679X(93)90019-WSearch in Google Scholar
[5] G.Bolelli, B.Bonferroni, J.Laurila, L.Lusvarghi, A.Milanti, K.Niemi, P.Vuoristo: Wear276/277 (2012) 29. 10.1016/j.wear.2011.12.001Search in Google Scholar
[6] B.Jodoin, P.Richer, G.Bérubé, L.Ajdelsztajn, A.Erdi-Betchi, M.Yandouzi: Surf. Coat. Technol.201 (2007) 7544. 10.1016/j.surfcoat.2007.02.033Search in Google Scholar
[7] A.P.Alkhimov, V.F.Kosarev, A.N.Papyrin: Sov. Phys. Dokl., Vol. 35, 12 (1990) 1047 (transl. American Institute of Physics, 1991).Search in Google Scholar
[8] L.Ajdelsztajn, M.Yandouzi: Surf. Coat. Technol.201 (2007) 7544. 10.1016/j.surfcoat.2007.02.033Search in Google Scholar
[9] S.K.Jalota: Metal Finish (2001) 320. 10.1016/S0026-0576(01)85292-2Search in Google Scholar
[10] W.Wang, R.N.Singh: J. Mater. Eng. Perform.7 (1998) 27. 10.1007/s11665-006-5001-6Search in Google Scholar
[11] S.A.M.Rafaey, F.Taha, T.H.A.Hasanin: Electrochim. Acta51 (2006) 2942. 10.1016/j.electacta.2005.09.033Search in Google Scholar
[12] X.J.Ning, J.-H.Kim, H.-J.Kim, C.Lee: Appl. Surf. Sci.255 (2009) 3933. 10.1016/j.apsusc.2008.10.074Search in Google Scholar
[13] W.Y.Li, C.J.Li, H.Liao, C.Coddet: Appl. Surf. Sci.253 (2007) 5967. 10.1016/j.apsusc.2006.11.010Search in Google Scholar
[14] K.H.Ko, H.Lee, J.O.Choi: Appl. Surf. Sci.257 (2011) 2970. 10.1016/j.apsusc.2010.10.102Search in Google Scholar
[15] P.Matteazzi, M.Alcalà: Mater. Sci. Eng. A230 (1997) 161. 10.1016/S0921-5093(97)00022-1Search in Google Scholar
[16] H.Mohrbacher, J.-P.Celis, J.R.Roos: Tribol. Int.28 (1995) 269. 10.1016/0301-679X(95)00005-OSearch in Google Scholar
[17] L.Ajdelsztajn, A.Zúñiga, B.Jodoin, E.J.Lavernia: J. Therm. Spray Technol.15 (2) (2006) 184. 10.1361/105996306X107995Search in Google Scholar
[18] Metals Handbook, Alloy phase diagrams, 9th Ed., Vol. 3, ASM, USA (1992).Search in Google Scholar
[19] J.H.E.Jeffes: Encyclopedia of Materials, Science and Technology (Sec. Ed.) (2001) 2751.10.1016/B0-08-043152-6/00490-3Search in Google Scholar
[20] M.Amiri, M.M.Khonsari: Entropy12 (2010) 1021. 10.3390/e12051021Search in Google Scholar
[21] B.Prakash, J.-P.Celis: Tribol. Lett.27 (2007) 105. 10.1007/s11249-007-9223-zSearch in Google Scholar
© 2015, Carl Hanser Verlag, München