Abstract
The paper summarizes the results of a comparative study of grain size distribution and morphometric characteristics of synthetic and natural diamond grinding powders For the first time the morphometric characteristics of natural diamond grinding powders have been comprehensively identified and the uniformity of the powders have been quantitatively assessed by the system-criteria method.
Similar content being viewed by others
References
Koval’chuk, Yu.M., Bukin, V.A., Glagovskii, B.A., et al., Osnovy proektirovaniya i tekhnologiya izgotovleniya abrazivnogo i almaznogo instrumenta (Fundamentals of Design and Production Technique for Abrasive and Diamond Tool Manufacture), Moscow: Mashinostroenie, 1984.
Bogatyreva, G.P., Petasyuk, G.A., Bazalii, G.A., and Shamraeva, V.S., On Morphometric Uniformity of Diamond Micron Powders, Sverkhtverdye Materialy, 2009, no. 2, pp. 71–81 [J. Superhard Mater., 2009, no. 2].
Bakul, V.N., The Number of Grains per Carat as One of the Most Important Characteristics of Diamond Powders, Sinteticheskie Almazy, 1974, issue 4, pp. 22–27.
Shul’zhenko, O.O., Nozhkina, A.V., Gargin, V.G., et al., Comparative Physico-Mechanical Characteristics of Micron Powders of Synthetic and Natural Diamonds and Polycrystalline Composite Materials Based on Them, Sverkhtverdye Materialy, 2008, no. 5, pp. 7–15 [J. Superhard Mater., 2008, no. 5].
Nailer, S., Gallagher J., and Leahy, W., Die Eigenschaften natarlicher und synthetischer Diamantschleifkornungen, Ind. Diaman. Rundschau, 2007, no. 4, pp. 54–63.
GOST (State Standard) 9206-80. Diamond Powders. Specification, 1981.
Novikov, N.V., Nikitin, Yu.I., and Petasyuk, G.A., Computer-Based Diagnostic Sieve for Identification of Grain Size and Grain Size Distribution in Microscopic Samples of Diamond Grinding Powders, Sverkhtverdye Materialy, 2003, no. 3, pp. 71–83 [J. Superhard Mater., 2003, no. 3].
List, E., Frenzel, J., and Vollstadt, H., A New System for Single Particle Strength Testing of Grinding Powders, Ind. Diam. Rev., 2006, no. 1, pp. 42–47.
Novikov, N.V., Nikitin, Yu.I., and Petasyuk, G.A., Uniformity of Synthetic Diamond Powders and Criteria for Its Quantitative Assessment, Sverkhtverdye Materialy, 1999, no. 5, pp. 65–74 [J. Superhard Mater., 1999, no. 5].
Petasyuk, G.A., Extrapolation-Geometric Method for Determination of the External Specific Surface Area of Powders of Superhard Materials, Izmeritel’naya Tekhnika, 2008, no. 1, pp. 59–64.
Petasyuk, G.A., Interpretative and Applied Aspects of Some Morphological Characteristics of Superabrasive Powders, Sverkhtverdye Materialy, 2010, no. 2, pp. 80–95 [J. Superhard Mater., 2010, no. 2].
Pliss, D.A., On the Theory of Vibration Separation, Mekhanika Tverdogo Tela, 1967, no. 4, pp. 25–31.
Brukva, A.G., Grishchenko, G.S., Nikitin, Yu.I., et al., USSR Inventor’s Certificate no. 1 279 686, Byul. Izobret., 1986, no. 48.
Petasyuk, G.A., Computer Modeling of the Sieve Analysis Procedure for Superabrasive Grinding Powders, Zavodskaya Laboratoriya, 1999, no. 10, pp. 29–32.
Author information
Authors and Affiliations
Additional information
Original Russian Text © M.N. Safonova, G.A. Petasyuk, A.S. Syromyatnikova, A.A. Fedotov, 2011, published in Sverkhtverdye Materialy, 2011, Vol. 33, No. 4, pp. 78–89.
About this article
Cite this article
Safonova, M.N., Petasyuk, G.A., Syromyatnikova, A.S. et al. The study of grain size distribution and morphometric characteristics of synthetic and natural diamond grinding powders. J. Superhard Mater. 33, 274–282 (2011). https://doi.org/10.3103/S1063457611040083
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457611040083