References
Talantov, N.V., Fizicheskie osnovy protsessa rezaniya, iznashivaniya i razrusheniya instrumenta (Physical Principles of Cutting and Tool Wear and Failure), Moscow: Mashinostroenie, 1992.
Lipatov, A.A., Influence of the Temperature Dependence of the Blank’s Thermal Conductivity on the Contact Interaction and Type of Chip Formation, Stanki Instrum., 2006, no. 8, pp. 37–40.
Reznikov, A.N., Teplofizika protsessov mekhanicheskoi obrabotki materialov (Thermal Physics of Machining), Moscow: Mashinostroenie, 1981.
Lipatov, A.A., Chigirinskii, Yu.L., and Kormilitsyn, S.I., Method of Determining the Forces at the Rear Surface of a Cutting Tool, Stanki Instrum., 2010, no. 8, pp. 6–8.
Larikov, A.N. and Yurchenko, Yu.F., Teplovye svoistva metallov i splavov (Thermal Properties of Metals and Alloys), Kiev: Naukova Dumka, 1985.
Livshits, B.G., Kraposhin, V.S., and Linetskii, Ya.L., Fizicheskie svoistva metallov i splavov (Physical Properties of Metals and Alloys), Moscow: Metallurgiya, 1980.
Maslenkov, S.B., Zharoprochnye stali i splavy: Spravochnik (High-Temperature Steel and Alloys: A Handbook), Moscow: Metallurgiya, 1983.
Khimushin, F.F., Zharoprochnye stali i splavy (High-Temperature Steel and Alloys), Moscow: Metallurgiya, 1969.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.A. Lipatov, Yu.L. Chigirinskii, 2012, published in STIN, 2012, No. 7, pp. 28–30.
About this article
Cite this article
Lipatov, A.A., Chigirinskii, Y.L. Tool’s surface temperature when cutting materials with temperature-dependent thermal conductivity. Russ. Engin. Res. 33, 114–116 (2013). https://doi.org/10.3103/S1068798X13020081
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X13020081