Abstract
A technique of the optimization of the pultrusion process for rods with a large diameter with the use of methods of mathematical modeling is described. An example of the search for the optimum technological parameters for the pultrusion of a glass-plastic rod with a diameter of 80 mm is presented.
Similar content being viewed by others
References
Kerber, M.L., Vinogradov, V.M., Golovkin, G.S., et al., Polimernye kompozitsionnye materialy: struktura, svoistva, tekhnologiya. Ucheb. posobie (Polymer Composite Materials: Structure, Properties, Technology. Student’s Book), Berlin, A.A., Ed., St. Petersburg: Professiya, 2008.
Safonov, A.A. and Khairetdinov, A.Kh., Mathematical Description of Composite Materials Polymerization Process in Pultrusion Technology, in Vnedrenie opyta prikladnykh perspektivnykh tekhnologii aviastroeniya v promyshlennosti i na transporte. Trudy NPP “Perspektivnye tekhnologii-ApATeK” (Adoption of Topical Technologies of Aircraft Construction in Industry and Transport. Proc. NPP “Promising Technologies of ApATeK”), Moscow: Izdat. otd. tsentr. aerogidrodinamich. in-ta, 2004, issue 3, pp. 87–93.
Safonov, A.A. and Khairetdinov, A.Kh., Mathematical Simulation of Technological Process of Pultrusion Drawing of Thick-Wall Cylindrical Bars and Shells, Trudy 4-i mezhdunar. konf. “Teoriya i praktika tekhnologii proizvodstva izdelii iz kompozitsionnykh materialov i novykh metallicheskikh splavov (TPKMM)” (Proc. 4th Intern. Conf. “Theory and Practice of Production Engineering of Units Made of Composite Materials and New Metal Alloys (PECMMA)”), Moscow: Znanie, 2005, pp. 560–564.
Skudra, A.M. and Bulavs, F.Ya., Prochnost’ armirovannykh plastikov (Strength of Reinforced Plastics), Moscow: Khimiya, 1982.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.A. Safonov, Yu.V. Suvorova, 2009, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2009, No. 6, pp. 59–66.
About this article
Cite this article
Safonov, A.A., Suvorova, Y.V. Optimization of the pultrusion process for a rod with a large diameter. J. Mach. Manuf. Reliab. 38, 572–578 (2009). https://doi.org/10.3103/S1052618809060090
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618809060090