Abstract
A classic theoretical solution is used to estimate the value of the deformation rate intensity factor during the course of the extrusion of a bar. The experiment was performed on samples of brass. A law of the variation of the thickness of a layer of intensive deformations near the friction surface was determined. The obtained relationship is analyzed and its generalizations are proposed.
Similar content being viewed by others
References
Dutton, R.E., Goetz, R.L., Shamasundar, S., and Semiatin, S.L., The Ring Test for P/M Materials, Trans. ASME. J. Manuf. Sci. Engng, 1998, vol. 120, no. 4, pp. 764–769.
Aukrust, T. and LaZghab, S., Thin Shear Boundary Layers in Flow of Hot Aluminum, Intern. J. Plast, 2000, vol. 16, no. 16, pp. 59–71.
Moylan, S.P., Kompella, S., Chandrasekar, S., and Farris, T.N., A New Approach for Studying Mechanical Properties of Thin Surface Layers Affected by Manufacturing Processes, Trans. ASME. J. Manuf. Sci. Engng., 2003, vol. 125, pp. 310–315.
Alexandrov, S. and Richmond, O., Singular Plastic Flow Fields Near Surfaces of Maximum Friction Stress, Int. J. Non-Linear Mech., 2001, vol. 36, no. 1, pp. 1–11.
Alexandrov, S. and Mishris, G., Viscoplasticity with a Saturation Stress: Distinguished Features of the Model, Arch. Appl. Mech., 2007, vol. 77, no. 1, pp. 35–47.
Aleksandrov, S.E., Gol’dshtein, R.V., and Lyamina, E.A., Concept Development of Strain Rate Intensity Factor in the Theory of Plasticity, Dokl. RAN, 2003, vol. 389, no. 2, pp. 180–183.
Aleksandrov, S.E. and Lyamina, E.A., Nonlocal Criterion of Failure Near Friction Surface and its Application to Analysis of Drawing and Extrusion Processes, Problemy Mashinostroeniya i Nadezhnosti mashin, 2007, no. 3, pp. 62–68.
Lyamina, E., Alexandrov, S., Grabco, D., and Shikimaka, O., An Approach to Prediction of Evolution of Material Properties in the Vicinity of Frictional Interfaces in Metal Forming, Key Engng Mater., 2007, vol. 345–346, pp. 741–744.
Khill, R., Matematicheskaya teoriya plastichnosti (Mathematical Theory of Plasticity), Moscow: Gostekhizdat, 1956.
Durban, D., Drawing and Extrusion of Composite Sheets, Wires and Tubes, Int. J. Solids Struct., 1984, vol. 20, pp. 649–666.
Lyamina, E.A., Application of the Method of Characteristics to Finding the Strain Rate Intensity Factor, Onate, E., Owen, R., and Suarez, B. Eds., Computation Plasticity Fundamentals and Applications. COMPLAS IX, Barselona, Spain, Center Numerical Methods in Engineering (CIMNE), 2007, part 2, pp. 919–923.
Rapoport, L.S. and Rybakova, L.M., The Impact of Surface Layer Structural Condition onto Friction and Wear Processes. Part I, Trenie i iznos, 1987, vol. 8, no. 5, pp. 888–894.
Rapoport, L.S. and Rybakova, L.M., The Impact of Surface Layer Structural Condition onto Friction and Wear Processes. Part II, Trenie i iznos, 1987, vol. 8, no. 5, pp. 888–894.
Rapoport, L.S., Plastic Deformation Levels of Surface Layers and its Connection with Wearing Process, Trenie i iznos, 1989, vol. 10, no. 5, pp. 786–792.
Fizicheskaya mezomekhanika i komp’yuternoe konstruirovanie materialov (Physical Mesomechanics and Computer Design of Materials), Panin, V.E., Ed., Novosibirsk: Nauka, 1995, vol. 1.
Author information
Authors and Affiliations
Additional information
Original Russian Text © S.E. Aleksandrov, D.Z. Grabko, O.A. Shikimaka, 2009, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2009, No. 3, pp. 72–78.
About this article
Cite this article
Aleksandrov, S.E., Grabko, D.Z. & Shikimaka, O.A. The determination of the thickness of a layer of intensive deformations in the vicinity of the friction surface in metal forming processes. J. Mach. Manuf. Reliab. 38, 277–282 (2009). https://doi.org/10.3103/S105261880903011X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S105261880903011X