Abstract
In this work we have used acetoxypropylcellulose (APC) to produce free standing solid films (∼60 μm) that were used for assembling electro-optical devices. Thin films were obtained from concentrated lyotropic solutions of cellulose derivatives. Induced by the cast and shearing preparation conditions wrinkles and band textures can be observed in their free-surface plane. In order to eliminate and control these textures we used a process similar to that introducted in literature [1] which consists of storing the films in the same solvent-vapour atmosphere as the solution system. Lyotropic APC liquid crystalline solutions in dymethylacetamide (DMA) with crosslinker were prepared, thin films were obtained by using a shear/casting technique and stored in the solvent-vapour atmosphere until a planar structure was achieved. The dried crosslinked films were analyzed by optical polarised microscopy (POM) and scanning electron microscopy (SEM). The films with different topographies were used to produce optical cells composed by the cellulose derivative film covered on both free surfaces by a layer of the nematic liquid crystal E7 and placed between two transparent conducting substrates. The electro-optical properties of these cells were obtained.
[1] S. Suto and K. Suzuki, “Crosslinked hydroxypropyl cellulose films retaining cholesteric liquid crystalline order. I. Effects of cast conditions and heat treatment on the textures and order of films”, J. Appl. Polymer Science 55, 139–151 (1995). http://dx.doi.org/10.1002/app.1995.07055011610.1002/app.1995.070550116Search in Google Scholar
[2] D.G. Gray, “Chiral nematic ordering of polysaccharides”, Carbohydrate Polymers 25, 277–284 (1994). http://dx.doi.org/10.1016/0144-8617(94)90053-110.1016/0144-8617(94)90053-1Search in Google Scholar
[3] E. Bianchi, E. Marsano, P. Picasso, L. Matassini, and C. Costa, “Polymeric liquid crystals: cholesteric superstructure from blends of hydroxypropylcellulose esters”, Polymers for Advanced Technologies 14, 529–536 (2003). http://dx.doi.org/10.1002/pat.36410.1002/pat.364Search in Google Scholar
[4] J. Giasson, J.F. Revol, D.G. Gray, and J. Stpierr, “Preparation of chiral nematic gels by radiation cross-linking”, Macromolecules 24, 1694–1696 (1991). http://dx.doi.org/10.1021/ma00007a03910.1021/ma00007a039Search in Google Scholar
[5] H. Hou, A. Reuning, J.H. Wendorff, and A. Greiner, “Tuning of the pitch height of thermotropic cellulose esters”, Macromolecular Chemistry and Physics 201, 2050–2054 (2000). http://dx.doi.org/10.1002/1521-3935(20001001)201:15<2050::AID-MACP2050>3.0.CO;2-I10.1002/1521-3935(20001001)201:15<2050::AID-MACP2050>3.0.CO;2-ISearch in Google Scholar
[6] S.L. Tseng, A. Valente, and D.G. Gray, “Cholesteric liquid crystalline based on (acetoxypropyl)cellulose”, Macromolecules 14, 715–719 (1981). http://dx.doi.org/10.1021/ma50004a04910.1021/ma50004a049Search in Google Scholar
[7] T. Sato, J. Nakamura, A. Teramoto, and M.M. Green, “Cholesteric pitch of lyotropic polymer liquid crystals”, Macromolecules 31, 1398–1405 (1998). http://dx.doi.org/10.1021/ma970968o10.1021/ma970968oSearch in Google Scholar
[8] S.N. Bhadani and D.G. Gray, “Cellulose-based liquid crystalline polymers — esters of (hydroxypropyl)-cellulose”, Molecular Crystals and Liquid Crystals 99, 29–38 (1983). 10.1080/00268948308072026Search in Google Scholar
[9] I. Rusig, M.H. Godinho, L. Varichon, P. Sixou, J. Dedier, C. Filliatre, and A.F. Martins, “Optical properties of cholesteric (2-hydroxypropyl)cellulose (HPC) esters”, J. Polymer Science. Part B: Polymer Physics 32, 1907–1914 (1994). http://dx.doi.org/10.1002/polb.1994.09032110810.1002/polb.1994.090321108Search in Google Scholar
[10] M. Muller and R. Zentel, “Cholesteric phases and films from cellulose derivatives”, Macromolecular Chemistry and Physics 201, 2055–2063 (2000). http://dx.doi.org/10.1002/1521-3935(20001001)201:15<2055::AID-MACP2055>3.0.CO;2-P10.1002/1521-3935(20001001)201:15<2055::AID-MACP2055>3.0.CO;2-PSearch in Google Scholar
[11] G.V. Laivins and D.G. Gray, “Characterization and chain stiffness of (acetoxypropyl)cellulose”, Macromolecules 18, 1746–1752 (1985). http://dx.doi.org/10.1021/ma00151a01810.1021/ma00151a018Search in Google Scholar
[12] G.V. Laivins and D.G. Gray, “Liquid crystalline phase transition of a semiflexible polymer — (acetoxypropyl)cellulose”, Macromolecules 18, 1753–1759 (1985). http://dx.doi.org/10.1021/ma00151a01910.1021/ma00151a019Search in Google Scholar
[13] J.B. Riti, M.T. Cidade, M.H. Godinho, A.F. Martins, and P. Navard, “Shear induced textures of thermotro-pic acetoxypropylcellulose”, J. Rheology 41, 1247–1260 (1997). http://dx.doi.org/10.1122/1.55084210.1122/1.550842Search in Google Scholar
[14] H.G. Graighead, J. Cheng, and S. Hackwood, “New display based on electrically induced index matching in an inhomogeneous-medium”, Appl. Phys. Lett. 40, 22–24 (1982). http://dx.doi.org/10.1063/1.9290410.1063/1.92904Search in Google Scholar
[15] M.H. Godinho, A.F. Martins, and J.L. Figueirinhas, “Novel PDLC type display based on cellulose derivatives”, Liquid Crystals 20, 373–376 (1996). Search in Google Scholar
[16] J.L. Figueirinhas, P.L. Almeida, and M.H. Godinho, Polysaccharides Structural Diversity and Functional Versatility, New York, Marcel Dekker, 2004. Search in Google Scholar
[17] M.H. Godinho, J.G. Fonseca, A.C. Ribeiro, L.V. Melo, and P. Brogneira, “Atomic force microscopy study of hydroxypropylcellulose films prepared from liquid crystalline aqueous solutions”, Macromolecules 35, 5932–5936 (2002). http://dx.doi.org/10.1021/ma011876910.1021/ma0118769Search in Google Scholar
[18] P.J. Sebastião, C. Cruz, C. Pires, A. Ferraz, P. Brogueira, and M.H. Godinho, “Anisotropic hydroxypropyl-cellulose films as alignment layers of a bistable ferroelectric device”, Liquid Crystals, 29, 1491–1495 (2002). http://dx.doi.org/10.1080/026782902100003483510.1080/0267829021000034835Search in Google Scholar
[19] P.L. Almeida, S. Tavares, A.F. Martins, M.H. Godinho, M.T. Cidade, and J.L. Figueirinhas, “Cross-linked hydroxypropylcellulose films: mechanical behaviour and electro-optical properties of PDLC type cells. Optical Materials 20, 97–100 (2002). http://dx.doi.org/10.1016/S0925-3467(02)00051-410.1016/S0925-3467(02)00051-4Search in Google Scholar
[20] J.G. Fonseca, M.H. Godinho, and A.C. Ribeiro, “Anchoring properties of a nematic liquid crystal on anisotropic hydroxypropylcellulose films”, Liquid Crystals 32, 913–919 (2005). http://dx.doi.org/10.1080/0267829050018179110.1080/02678290500181791Search in Google Scholar
[21] X.S. Zhou and Y. Huang, “Temperature dependence of the phase separation in ethyl cyanoethyl cellulose/poly (acrylic acid)/4’-n-pentyl-4-cyano-biphenyl composite films”, J. Polymer Science: Polymer Physics Edition 40, 1334–1341 (2002). http://dx.doi.org/10.1002/polb.1019310.1002/polb.10193Search in Google Scholar
[22] O.A. Aphonin, Y.V. Panina, A.B. Pradin, and D.A. Yakolev, “Optical-properties of stretched polymer dispersed liquid crystal films”, Liquid Crystals 15, 395–407 (1993). Search in Google Scholar
[23] I. Amimori, N.V. Priezjev, R.A. Pelvovits, and G.P. Crawford, “Optomechanical properties of stretched polymer dispersed liquid crystal films for scattering polarizer applications”, J. Appl. Phys. 93, 3248–3252 (2003). http://dx.doi.org/10.1063/1.155475710.1063/1.1554757Search in Google Scholar
[24] D. Filip, I. Costa, J.L. Figueirinhas, and M.H. Godinho, “Anisotropic cellulose derivative matrix for dispersed liquid crystals”, Liquid Crystals 33, 109 (2006). http://dx.doi.org/10.1080/0267829050045075810.1080/02678290500450758Search in Google Scholar
[25] D. Filip, I. Costa, J.L. Figueirinhas, and M.H. Godinho, “Strain-induced matrix and droplets anisotropic deformation in liquid crystalline cellulose dispersed liquid crystal films”, Composite Interfaces 13, 477–486 (2006). http://dx.doi.org/10.1163/15685540677740853910.1163/156855406777408539Search in Google Scholar
© 2006 SEP, Warsaw
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
