The influence of the brake pad surface machining and finishing on its friction performance- examined by inertia brake dynamometr testing
DOI:
https://doi.org/10.24136/atest.2018.101Keywords:
brake pads, friction characteristics, surface machining, surface finishing, machining methods, finishing methods, noise emission, brakes test, dynamometryAbstract
The article describes the influence of brake pads surface machining and finishing on their friction characteristics. It shows the methods of machining and finishing of the brake pads surface and their influence on noise emission and performance. It shows the brake dynamometer test results obtained on three brake pads which have three different types of surface modification and their detailed analysis and comparison.
Downloads
References
„Hamulce w pojazdach i maszynach roboczych”, Kraków, 1988.
Breuer B.,. Bill K. H, “Brake Technology Handbook”, 1nd eng. ed., Warrendale, Pennsylvania, USA, SAE, 2008.
Breuer B.,. Dausend U, “Advanced Brake Technology”, 1nd eng. ed., Warrendale, Pennsylvania, USA, SAE, 2003.
Jaworski J., „Okładziny cierne do hamulców i sprzęgieł pojazdów mechanicznych”, WKiŁ, Warszawa, 1984.
Reif K., “Brakes, Brake Control and Driver Assistance Systems”, Weisbaden, Germany, Springer Vieweg, 2014
Limpert R., “Brake Design and Safety”, 3rd ed., Warrendale, Pennsylvania, USA, SAE, 2011
. Scieszka S. F, “Hamulce cierne, zagadnienia materiałowe, konstrukcyjne i tribologiczne”, 1st ed., Radom, Poland, WiZPITE, 1998
Osiński Z., „Sprzęgła i hamulce”, PWN, Warszawa, 2000.
Szydelski Z., „Pojazdy samochodowe – sprzęgła, hamulce i przekładnie hydrokinetyczne”, WKiŁ, Warszawa, 1981