Crude Oil Desalting by Using Nanocarbon

Document Type : Original Paper

Authors

Department of Chemical Engineering, Marvdasht Branch, Islamic Azad University, Marvdasht, Iran

Abstract

In the process of crude oil desalination, the aim is to separate dispersed phase of brine from oil phase. The project aim is the use of carbon nano-adsorbent for remov-al of salt from crude oil that, unlike other methods of salt separation from crude oil currently used, is a simple, inexpensive method with good ability to remove salt from crude oil. In this study, first, four types of carbon adsorbent were used for removal of salt from crude oil using dispersion in solution method. Then, the adsorbents that had the best absorption were identified. In continuation, two nano-adsorbents were selected from nano-adsorbents and their effect on the absorption of salt from crude oil was investigated using filtration method. Finally, a survey was carried out on regeneration of multi-walled carbon nanotubes that had the ability to absorb more than 50% of salt from crude oil, which were then selected as the best nano-adsorbents.

Keywords


[1] Abdel-Aal, H.K., Aggour, M. and Fahim, M.A. (2003). Petroleum and Gas Field Processing. Marcel Dekker, Inc., New York.
[2] Gary, J.H., Handwerk, G.E. and Kaiser, M.J. (2001). Petroleum Refining: Technology and Economics. 4th Ed.Marcel Dekker, Inc., New York.
[3] Sams, G.W. and Warren, K.W. (2004). “New Methods of Application of Electrostatic Fields.” AIChE Spring National Meeting, New Orleans, Louisiana.
[4] Stasiuk, E.N. and Schramm, L.L. (2001). “The influence of solvent and demulsifier additions on nascent froth formation during flotation recovery of Bitumen from Athabasca oil sands.” Fuel Processing Technology, Vol. 73, pp. 95-110.
[5] Tsouris, C., Shin, W.T. and Yiacoumi, S. (1998). “Pumping, spraying, and mixing of fluids by electric fields.” The Canadian Journal of Chemical Engineering, Vol. 76, pp. 589–599.
[6] Parker, S.P. (1983). Encyclopedia of Chemistry. 2nd Ed. McGraw-Hill.
[7] Binks, B.P. and Whitby, C.P. (2003). “Temperature-dependent stability of water-in-undecanol emulsions.” Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 224, pp. 241-249.
[8] Miksis, M.J. (1981). “Shape of a drop in an electric field.” Physics of Fluids, Vol. 24, pp. 1967-1972.
[9] Feng, J.Q. and Scott, T.C. (1996). “A computational analysis of electrohydrodynamics of a leaky dielectric drop in an electric field.” Journal of Fluid Mechanics., Vol. 311, pp. 289-326.
[10] Yuan, Y., Han, M., Wang, D. and Jin, Y. (2004). “Liquid phase residence time distribution for a two-phase countercurrent flow in a packed column with a novel internal.” Chemical Engineering and Processing, Vol. 43, pp. 1469-1474.
[11] Nikkhah, M., Tohidian, T., Rahimpour, M.R. and Jahanmiri, A. (2015). “Efficient demulsification of water-in-oil emulsion by a novel nano-titania modified chemical demulsifier.” Chemical Engineering Research and Design, Vol. 94, pp. 164-172.
[12] Harris, P.J.F. (1999). Carbon Nanotubes and Related Structures: New Materials for the Twenty-first Century. Cambridge University Press.
[13] Popov, V.N. (2004). “Carbon nanotubes: properties and application.” Materials Science and Engineering R, Vol. 43, pp. 61-102.
[14] Karwa, M., Iqbal, Z. and Mitra, S. (2006). “Scaled-up self-assembly of carbon nanotubes inside long stainless tubing.” Carbon, Vol. 44, pp. 1235-1242.
[15] Chung, J., Lee, K.H., Lee, J. and Ruoff, R.S. (2004). “Toward Large-Scale Integration of Carbon Nanotubes.” Langmuir, Vol. 20, pp. 3011-3017.
[16] Dyke, C.A., Stewart, M.P. and Tour, J.M. (2005). “Separation of Single-Walled Carbon Nano-tubes on Silica Gel. Materials Morphology and Raman Excitation Wavelength Affect Data Interpretation.” Journal of American Chemical Society, Vol. 127, pp. 4497-4509.
[17] Vazquez, E. and Prato, M. (2009) “Carbon Nanotubes and Microwaves: Interactions, Responses, and Applications.” American Chemical Society Nano, Vol. 3, No. 12, pp. 3819-3824.
[18] Kalfa, O.M., Yalcinkaya, O. and Turker, A.R. (2012). “MWCNT/nano-ZrO2 as a new solid phase extractor: its synthesis, characterization, and application to atomic absorption spectrometric determination of lead.” Turkish Journal of Chemistry, Vol. 36. pp. 885-898.
[19] Sad, C.M.S., Santana, I.L., Morigaki, M.K., Medeiros, E.F., Castro, E.V.R., Santos, M.F.P. and Figueiras, P.R. (2015). “New methodology for heavy oil desalination.” Fuel, Vol. 150, pp. 705-710.
[20] Kim, S.F., Usheva, N.V., Moyzes, O.E., Kuzmen-ko, E.A., Samborskaya, M.A. and Novoseltseva, E. A. (2014). “Modeling of dewatering and desalting processes for large-capacity oil treatment technology.” Procedia Chemistry, Vol. 10, pp. 448-453.
[21] Check, G.R. and Mowla, D. (2013). “Theoretical and experimental investigation of desalting and dehydration of crude oil by assistance of ultrasonic irradiation.” Ultrasonics Sonochemistry, Vol. 20, pp. 378-385.
[22] Mahdi, K., Gheshlaghi, R., Zahedi, G. and Lohi, A. (2008). “Characterization and modeling of a crude oil desalting plant by a statistically designed approach.” Journal of Petroleum Science and Engineering, Vol. 61, pp. 116-123.