Manufacturing Technology 2023, 23(3):307-312 | DOI: 10.21062/mft.2023.044

Volume Change Measurements Using 2D DIC System

Barbora Kotlánová ORCID..., Jakub Javořík ORCID..., Milan ®aludek ORCID..., Raphael Olabanji Ogunleye ORCID...
Department of Production Engineering, Faculty of Technology, Tomas Bata University in Zlín. Vavrečkova 5669, 76001 Zlín. Czech Republic

The presented study focuses on measuring volume changes in elastomeric materials using digital image correlation (DIC), specifically the 2D DIC universal system and the 2D DIC video-extensometer directly implemented to the universal testing machine. Optical measurement methods were applied in two-dimensional (2D) configurations during the mechanical testing of dumbbell-shaped test specimens under uniaxial tension. The measured data were used to determine the dependencies of the bulk modulus and Poisson's ratio on the strain. The dependencies obtained by both methods correspond to the model behavior of rubber-like materials. Compared to the 2D DIC implemented video-extensometer, the 2D DIC universal system provides a tool for measuring transverse and longitudinal strain, and a wide range of post-processing options, including change of the input parameters, settings, or calculation relations.

Keywords: Elastomer, DIC, Volume Change, Bulk Modulus, Poisson's ratio
Grants and funding:

This article was written with the support of the project IGA/FT/2023/004 TBU in Zlin

Received: March 10, 2023; Revised: June 19, 2023; Accepted: June 21, 2023; Prepublished online: June 21, 2023; Published: July 5, 2023  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Kotlánová B, Javořík J, ®aludek M, Ogunleye RO. Volume Change Measurements Using 2D DIC System. Manufacturing Technology. 2023;23(3):307-312. doi: 10.21062/mft.2023.044.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. LE CAM, J. B., TOUSSAINT, E. (2009). Cyclic volume changes in rubber. In: Mechanics of Materials, Vol. 41, No. 7, pp. 898-901. Elsevier. ISSN 0167-6636 Go to original source...
    2. DE CREVOISIER, J. et al. (2012). Volume changes in a filled elastomer studied via digital image correlation. In: Polymer Testing, Vol. 31, No. 5, pp. 663-670. Elsevier. ISSN 0142-9418 Go to original source...
    3. CANDAU, N. et al. (2016). On the use of a four-cameras stereovision system to characterize large 3D de-formation in elastomers. In: Polymer Testing, Vol. 56, pp. 314-320. Elsevier. ISSN 0142-9418 Go to original source...
    4. FARFÁN-CABRERA, L. I. et al. (2017). Determination of creep compliance, recovery and Poisson's ratio of elastomers by means of digital image correlation (DIC). In: Polymer Testing, Vol. 59, pp. 245-252. Elsevier. ISSN 0142-9418 Go to original source...
    5. SOTOMAYOR-DEL-MORAL, J. A. et al. (2022). Characterization of Viscoelastic Poisson's Ratio of Engineering Elastomers via DIC-Based Creep. In: Polymers, Vol. 14, No. 9, pp. 1837 MDPI. ISSN 2073-4360 Go to original source...
    6. SCHREIER, H., ORTEAU, J.J., SUTTON, M. A. (2009). Image Correlation for Shape, Motion and Deformation Measurements. Springer US. ISBN 978-0- 387-78746-6 Go to original source...
    7. SUTTON, M., REU, P. L. (2017). International Digital Imaging Correlation Society: Proceedings of the First Annual Conference. Springer International Publishing. ISBN 978-3-319-84651-4
    8. International Digital Image Correlation Society, JONES, E.M.C. and IADICOLA, M.A. (2018). A Good Practices Guide for Digital Image Correlation.
    9. ILSENG, A., SKALLERUD, B. H., CLAUSEN, A. H. (2017). An experimental and numerical study on the volume change of particle-filled elastomers in various loading modes. In: Mechanics of Materials, Vol. 106, pp. 44-57. Elsevier. ISSN 0167-6636 Go to original source...
    10. LE CAM J. B. (2010). A REVIEW OF VOLUME CHANGES IN RUBBERS: THE EFFECT OF STRETCHING. In: Rubber Chemistry and Technology, Vol. 83, No. 3, pp. 247-269. American Chemical Society Rubber Division. United States. ISSN 0035-9475 Go to original source...
    11. CHEVALIER, L. et al. (2001). Digital image correlation used to analyze the multiaxial behavior of rubber-like materials. In. European Journal of Mechanics - A/Solids, Vol. 20, No. 2, pp. 169-187. Elsevier BV. ISSN 0997-7538 Go to original source...
    12. SUTTON, M. A. et al. (2008). The effect of out-of-plane motion on 2D and 3D digital image correlation measurements. In: Optics and Lasers in Engineering, Vol. 46, No. 10, pp. 746-757. Elsevier. ISSN 0143-8166 Go to original source...
    13. CHRISTENSEN, R. G., HOEVE, C. A. J. (1970) Comparison between theoretical and experimental values of the volume changes accompanying rubber extension. In: Journal of Polymer Science Part A-1: Polymer Chemistry, Vol. 8, No. 6, pp. 1503-1512. John Wiley & Sons, Inc. ISSN 1099-0518 Go to original source...
    14. GOEBEL, J. C., TOBOLSKY, A. V. (1971) Volume Change Accompanying Rubber Extension. In: Rubber Chemistry and Technology, Vol. 44, No. 5, pp. 1391-1394. American Chemical Society Rubber Division, United States. ISSN 0035-9475 Go to original source...
    15. PENN, R. (1970) Volume changes accompanying the extension of rubber. In: Transactions of the Society of Rheology, Vol. 14, No. 4, pp. 509-517. The Society of Rheology. ISSN 0038-0032 Go to original source...
    16. SCHREIER, H.W., BRAASCH, J. R., SUTTON, M. A. (2000). Systematic errors in digital image correlation caused by intensity interpolation. In: Optical Engineering, Vol. 39, No. 11, pp. 2915-2921. SPIE. ISSN 0091-3286 Go to original source...
    17. VA©INA, M., PÖSCHL, M., ZÁADRAPA, P. (2021). Influence of Rubber Composition on Mechanical Properties. In: Manufacturing Technology, Vol. 21, No. 2, pp. 261-269. ISSN 1213-2489 Go to original source...
    18. GOH, C. P., RATNAM, M.M., ISMAIL, H. (2016). Large In-plane Deformation Mapping and Determination of Young's Modulus of Rubber Using Scanner-Based Digital Image Correlation. In: Experimental Techniques, Vol. 40, pp. 1117-1127. Springer Nature. ISSN 0732-8818 Go to original source...
    19. SOBOTKA, J., SOLFRONK, P., KORECEK, D. (2020). Influence of Stress State on the Yield Strength of Aluminium Alloy. In: Manufacturing Technology, Vol. 20, No. 1, pp. 92-97. ISSN 1213-2489 Go to original source...
    20. PAN, B. et al. (2009). Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. In: Measurement Science and Technology, Vol. 20, No. 6, pp. 1-17. IOP Publishing. ISSN 0957-0233 Go to original source...
    21. KUGLER, H. P., STACER, R.G., STEIMLE, C. (1990). Direct Measurement of Poisson's Ratio in Elastomers. In: Rubber Chemistry and Technology, Vol. 63, No. 4, pp. 473-487. American Chemical Society Rubber Division, United States. ISSN 0035-9475 Go to original source...
    22. KOREČEK, D., SOLFRONK, P., SOBOTKA, J. (2022). Analysis of the Dual-phase Steel DP500 Stress-strain Characteristics During the Plane Shear Test. In: Manufacturing Technology, Vol. 22, No. 1, pp. 34-38. ISSN 1213-2489 Go to original source...
    23. FARFÁN-CABRERA, L.I., PASCUAL-FRANCISCO, J.B. (2022). An Experimental Methodological Approach for Obtaining Viscoelastic Poisson's Ratio of Elastomers from Creep Strain DIC-Based Measurements. In: Experimental Mechanics, Vol. 62, pp. 287-297. Springer. ISSN 0014-4851 Go to original source...
    24. SEDLAK, J. et al. (2022). Determination of Mechanical Properties of Plastic Components Made by 3D Printing. In: Manufacturing Technology, Vol. 22, No. 6, pp. 733-746. ISSN 1213-2489 Go to original source...
    25. GOH, C.P. et al. (2017). Single-step scanner-based digital image correlation (SB-DIC) method for large de-formation mapping in rubber. In: Optics and Lasers in Engineering, Vol. 88, pp. 167-177. Elsevier ISSN 0143-8166 Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content