KEYWORDS
TOPICS
ABSTRACT
The paper presents the effects of the application of an experimental impulse test as a method of diagnosis of the technical condition of an SO-3 engine turbine blade fitted in a TS-11 Iskra aircraft. The aim of the test was to investigate the frequency characteristics of the blades and discuss differences between the frequency spectrum of the investigated component before and after its damage. The acoustic response measurements were performed to the signal generated by an impact hammer on the fully functional and intentionally damaged blades. The recorded signals were converted from the domain of time to the domain of frequency using the Fast Fourier Transform (FFT). The results of the FFT were the Frequency Response Functions (FRF) of the sound of the blades, based on which the statistical analysis of the resonance frequencies was carried out. The influence of the mechanical damage of the blade on the shape and characteristics of the frequency spectrum was confirmed, which substantiated the effectiveness of the impulse test in the diagnostic assessment of jet engine components.
 
REFERENCES (13)
1.
BŁACHNIO, J., BOGDAN, M., ZASADA, J. Increased temperature impact on durability of gas turbine blades. Eks-ploatacja i Niezawodnosc – Maintenance and Reliability. 2017, 19, 48-53. http://dx.doi.org/10.17531/ein....
 
2.
BOBROWSKI, D., MAĆKOWIAK-ŁYBACKA, K. Selected Statistical Inference Methods. Poznań University of Technology Publishing House, Poznań 2006 (in Polish).
 
3.
DØSSING, O., Structural testing, mechanical mobility measurements. Katalog Bruel & Kjaer 1988.
 
4.
DŻYGADŁO, Z., ŁYŻWIŃSKI, M., OTYŚ, J., et al. Rotor assemblies of turbine engines. Transport and Communication Publishers. Warszawa 1982 (in Polish).
 
5.
GOLEWSKI, P. Thermo-mechanical loads on turbine engine blades with ceramic protective coatings. Doctoral Thesis. Lublin University of Technology. Lublin 2015. http://bc.pollub.pl/publicatio... (in polish).
 
6.
JACOBSEN, N.-J. Seminar and Workshop on Structural Dynamics. Poznan University of Technology Publishing House. Poznań 2018.
 
7.
LIPKA, J. Strength of Rotating Machinery. Scientific and Technical Publishing House. Warszawa 1967 (in Polish).
 
8.
MERKISZ, J., WALIGÓRSKI, M. Numerical method of vibroacoustic estimators analysis in a frequency domain for IC engine. Combustion Engines. 2013, 154(3), 25-33. http://yadda.icm.edu.pl/yadda/...
 
9.
MITCHELL, L.D. Improved methods for the FFT calculation of the frequency response function. Journal of Mechanical Design. 1982, 104, 277-279. https://doi.org/10.1115/1.3256....
 
10.
Engine description, no. 17.0.248. Transport Equipment Manufacturing Plant PZL-Rzeszów. 1977 (in Polish).
 
11.
WILK, A., MADEJ, H., ŁAZARZ, B. The application of time-frequency analysis of vibration for gears diagnostics. Scientific Journal of Silesian University of Technology. Series Transport. Katowice 2001, 42 (in Polish). http://www.obrum.gliwice.pl/up...
 
12.
WIŚNIEWSKI, W. Ground vibration tests of flying objects – methods and results analysis. Transactions of the Institute of Aviation. Warszawa 2010, 7 (in Polish). http://yadda.icm.edu.pl/baztec...
 
13.
WITOŚ, M. On the modal analysis of a cracking compressor blade. Research Works of Air Force Institute of Technology. Warszawa 2008, 23, 5-20 (in Polish). http://yadda.icm.edu.pl/baztec...
 
 
CITATIONS (3):
1.
Using vibroacoustic methods to describe the dynamic properties of composite elements to assess their technical condition
Daniel Mokrzan, Julia Milewicz, Grzegorz Szymański
Rail Vehicles
 
2.
Determination of dynamic parameters of a tram wheel parts in a numerical and experimental modal analysis
Julia Milewicz, Krzysztof Kołodziejczak, Tomasz Nowakowski, Grzegorz Szymański
Archives of Transport
 
3.
The application of time-frequency methods of acoustic signal processing in the diagnostics of tram drive components
Daniel Mokrzan, Tomasz Nowakowski, Grzegorz M. Szymański
Archives of Transport
 
eISSN:2658-1442
ISSN:2300-9896
Journals System - logo
Scroll to top