Advances of 3D Printing in Vascularized Organ Construction
DOI:
https://doi.org/10.18063/ijb.v8i3.588Keywords:
3D printing, Vascularized organs, Organ manufacturing, Tissue engineering, Stem cellsAbstract
In the past several decades, three-dimensional (3D) printing has provided some viable tissues and organs for repairing or replacing damaged tissues and organs. However, the construction of sufficient vascular networks in a bioartificial organ has proven to be challenging. To make a fully functional bioartificial organ with a branched vascular network that can substitute its natural counterparts, various studies have been performed to surmount the limitations. Significant progress has been achieved in 3D printing of vascularized liver, heart, bone, and pancreas. It is expected that this technology can be used more widely in other bioartificial organ manufacturing. In this review, we summarize the specific applications of 3D printing vascularized organs through several rapid prototyping technologies. The limitations and future directions are also discussed.
References
Chatterjee P, Venkataramani AS, Vijayan A, et al., 2015, The Effect of State Policies on Organ Donation and Transplantation in the United States. JAMA Intern Med, 175:1323–9. https://doi.org/10.1001/jamainternmed.2015.2194
Robertson MP, Hinde RL, Lavee J, 2019, Analysis of Official Deceased Organ Donation Data Casts Doubt on the Credibility of China’s Organ Transplant Reform. BMC Med Ethics, 20:79. https://doi.org/10.1186/s12910-019-0406-6
Wang X, Liu C, 2018, 3D Bioprinting of Adipose-derived Stem Cells for Organ Manufacturing. In: Enabling Cutting Edge Technology for Regenerative Medicine. Ch. 1. Berlin: Spirnger. p3–14.
Lei M, Wang X, 2016, Biodegradable Polymers and Stem Cells for Bioprinting. Molecules, 21:539. https://doi.org/10.3390/molecules21050539
Liu F, Liu C, Chen Q, et al., 2017, Progress in Organ 3D Bioprinting. Int J Bioprinting, 4:1–15.
Yeong WY, Chua CK, Leong KF, et al., 2004, Rapid Prototyping in Tissue Engineering: Challenges and Potential. Trends Biotechnol, 22:643–52. https://doi.org/10.1016/j.tibtech.2004.10.004
Ozbolat IT, Hospodiuk M, 2016, Current Advances and Future Perspectives in Extrusion-Based Bioprinting. Biomaterials, 76:321–43. https://doi.org/10.1016/j.biomaterials.2015.10.076
Cui H, Nowicki M, Fisher JP, et al., 2017, 3D Bioprinting for Organ Regeneration. Adv Healthc Mater, 6:1601118. https://doi.org/10.1002/adhm.201601118
Griffith LG, Wu B, Cima MJ, et al., 1997, In Vitro Organogenesis of Liver Tissue. Ann N Y Acad Sci, 831:382–97. https://doi.org/10.1111/j.1749-6632.1997.tb52212.x
Zein NN, Hanouneh IA, Bishop PD, et al., 2013, Three-Dimensional Print of a Liver for Preoperative Planning in Living Donor Liver Transplantation. Liver Transpl, 19:1304–10. https://doi.org/10.1002/lt.23729
Paulsen SJ, Miller JS, 2015, Tissue Vascularization Through 3D Printing: Will Technology bring us Flow? Dev Dyn, 244:629–40. https://doi.org/10.1002/dvdy.24254
Chow SY, Yen-Chow YC, Woodbury DM, 1992, Studies on pH Regulatory Mechanisms in Cultured Astrocytes of DBA and C57 Mice. Epilepsia, 33:775–84. https://doi.org/10.1111/j.1528-1157.1992.tb02181.x
Kannan RY, Salacinski HJ, Sales K, et al., 2005, The Roles of Tissue Engineering and Vascularisation in the Development of Micro-Vascular Networks: A Review. Biomaterials, 26:1857–75. https://doi.org/10.1016/j.biomaterials.2004.07.006
Segal SS, 1994, Cell-to-cell Communication Coordinates Blood Flow Control. Hypertension, 23:1113–20. https://doi.org/10.1161/01.hyp.23.6.1113
Folkman J, Haudenschild C, 1980, Angiogenesis In Vitro. Nature, 288:551–6.
Nemeno-Guanzon JG, Lee S, Berg JR, et al., 2012, Trends in Tissue Engineering for Blood Vessels. J Biomed Biotechnol, 2012:956345. https://doi.org/10.1155/2012/956345
Risau W, Flamme I, 1995, Vasculogenesis. Annu Rev Cell Dev Biol, 11:73–91. https://doi.org/10.1146/annurev.cb.11.110195.000445
Ribatti D, Vacca A, Nico B, et al., 2001, Postnatal Vasculogenesis. Mech Dev, 100:157–63. https://doi.org/10.1016/s0925-4773(00)00522-0
Risau W, 1994, Angiogenesis and Endothelial Cell Function. Arzneimittelforschung, 44:416–7.
Hellstrom M, Phng LK, Gerhardt H, 2007, VEGF and Notch Signaling: The Yin and Yang of Angiogenic Sprouting. Cell Adh Migr, 1:133–6. https://doi.org/10.4161/cam.1.3.4978
Greenberg JI, Shields DJ, Barillas SG, et al., 2008, A Role for VEGF as a Negative Regulator of Pericyte Function and Vessel Maturation. Nature, 456:809–13. https://doi.org/10.1038/nature07424
Flamme I, Frolich T, Risau W, 1997, Molecular Mechanisms of Vasculogenesis and Embryonic Angiogenesis. J Cell Physiol, 173:206–10. https://doi.org/10.1002/(SICI)1097-4652(199711)173:2<206:AIDJCP22>3.0.CO;2-C
Rowe RG, Weiss SJ, 2008, Breaching the Basement Membrane: Who, When and How? Trends Cell Biol, 18:560–74. https://doi.org/10.1016/j.tcb.2008.08.007
Senger DR, Davis GE, 2011, Angiogenesis. Cold Spring Harb Perspect Biol, 3:a005090. https://doi.org/10.1101/cshperspect.a005090
Senger DR, Perruzzi CA, 1996, Cell Migration Promoted by a Potent GRGDS-Containing Thrombin-Cleavage Fragment of Osteopontin. Biochim Biophys Acta, 1314:13–24. https://doi.org/10.1016/s0167-4889(96)00067-5
Atkins GB, Jain MK, Hamik A, 2011, Endothelial Differentiation: Molecular Mechanisms of Specification and Heterogeneity. Arterioscler Thromb Vasc Biol, 31:1476–84. https://doi.org/10.1161/ATVBAHA.111.228999
Swift MR, Weinstein BM, 2009, Arterial-Venous Specification during Development. Circ Res, 104:576–88. https://doi.org/10.1161/CIRCRESAHA.108.188805
Tkachenko E, Gutierrez E, Saikin SK, et al., 2013, The Nucleus of Endothelial Cell as a Sensor of Blood Flow Direction. Biol Open, 2:1007–12. https://doi.org/10.1242/bio.20134622
Aird WC, 2007, Phenotypic Heterogeneity of the Endothelium: II. Representative Vascular Beds. Circ Res, 100:174–90. https://doi.org/10.1161/01.RES.0000255690.03436.ae
Cui H, Miao S, Esworthy T, et al., 2018, 3D Bioprinting for Cardiovascular Regeneration and Pharmacology. Adv Drug Deliv Rev, 132:252–69. https://doi.org/10.1016/j.addr.2018.07.014
Badorff C, Brandes RP, Popp R, et al., 2003, Transdifferentiation of Blood-Derived Human Adult Endothelial Progenitor Cells into Functionally Active Cardiomyocytes. Circulation, 107:1024–32. https://doi.org/10.1161/01.cir.0000051460.85800.bb
Yamamoto K, Takahashi T, Asahara T, et al., 2003, Proliferation, Differentiation, and Tube Formation by Endothelial Progenitor Cells in Response to Shear Stress. J Appl Physiol, 95:2081–8. https://doi.org/10.1152/japplphysiol.00232.2003
Singh A, Singh A, Sen D, 2016, Mesenchymal Stem Cells in Cardiac Regeneration: A Detailed Progress Report of the Last 6 Years (2010-2015). Stem Cell Res Ther, 7:82. https://doi.org/10.1186/s13287-016-0341-0
Levenberg S, Rouwkema J, Macdonald M, et al., 2005, Engineering Vascularized Skeletal Muscle Tissue. Nat Biotechnol, 23:879–84. https://doi.org/10.1038/nbt1109
Berthod F, Saintigny G, Chretien F, et al., 1994, Optimization of Thickness, Pore Size and Mechanical Properties of a Biomaterial Designed for Deep Burn Coverage. Clin Mater, 15:259–65. https://doi.org/10.1016/0267-6605(94)90055-8
Tremblay PL, Hudon V, Berthod F, et al., 2005, Inosculation of Tissue-Engineered Capillaries with the Host’s Vasculature in a Reconstructed Skin Transplanted on Mice. Am J Transplant, 5:1002–10. https://doi.org/10.1111/j.1600-6143.2005.00790.x
Zhang W, Wray LS, Rnjak-Kovacina J, et al., 2015, Vascularization of Hollow Channel-Modified Porous Silk Scaffolds with Endothelial Cells for Tissue Regeneration. Biomaterials, 56:68–77. https://doi.org/10.1016/j.biomaterials.2015.03.053
Norotte C, Marga FS, Niklason LE, et al., 2009, Scaffold-Free Vascular Tissue Engineering Using Bioprinting. Biomaterials, 30:5910–7. https://doi.org/10.1016/j.biomaterials.2009.06.034
Rider P, Zhang Y, Tse C, et al., 2016, Biocompatible Silk Fibroin Scaffold Prepared by Reactive Inkjet Printing. J Mater Sci, 51:8625–30.
Christensen K, Xu C, Chai W, et al., 2015, Freeform Inkjet Printing of Cellular Structures with Bifurcations. Biotechnol Bioeng, 112:1047–55. https://doi.org/10.1002/bit.25501
Wang X, Ao Q, Tian X, et al., 2016, 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials, 9:802. https://doi.org/10.3390/ma9100802
Liu F, Chen Q, Liu C, et al., 2018, Natural Polymers for Organ 3D Bioprinting. Ploymers, 10:1278. https://doi.org/10.3390/polym10111278
Wang X, 2016, 3D Printing of Tissue/Organ Analogues for Regenerative Medicine. In: Handbook of Intelligent Scaffolds for Regenerative Medicine. 2nd ed. Palo Alto, CA, USA: Pan Stanford Publishing, p557–70.
Liu F, Wang X, 2020, Synthetic Polymers for Organ 3D Printing. Polymers, 12:1765.
Li S, Tian X, Fan J, et al., 2019, Chitosans for TissueRepair and Organ Three-Dimensional (3D) Bioprinting. Micromachines, 10:765. https://doi.org/10.3390/mi10110765
Wang X, Yan Y, Zhang R, 2010, Gelatin-based Hydrogels for Controlled Cell Assembly. In: Ottenbrite RM, editor. Biomedical Applications of Hydrogels Handbook, New York: USA: Springer, p269–84.
Wang X, 2019, Bioartificial Organ Manufacturing Technologies. Cell Transplant, 28:5–17. https://doi.org/10.1177/0963689718809918
Wang X, Tuomi J, Mäkitie AA, et al., 2013, The Integrations of Biomaterials and Rapid Prototyping Techniques for Intelligent Manufacturing of Complex Organs, In: Lazinica R, editor. Advances in Biomaterials Science and Applications in Biomedicine. London: InTech, p437–63.
Zhao X, Wang X, 2013, Preparation of An Adipose-Derived Stem Cell (ADSC)/Fibrin-PLGA Construct Based on a Rapid Prototyping Technique. J Bioact Compat Polym, 28:191–203.
Zhao X, Liu L, Wang J, et al. 2014, In Vitro Vascularization of a Combined System Based on a 3D Bioprinting Technique. J Tissue Eng Regen Med, 10:833–42. https://doi.org/10.1002/term.1863
Schrepfer I, Wang X, 2015, Progress in 3D Printing Technology in Health Care. In: Wang X, editor. Organ Manufacturing. Hauppauge. New York, USA: Nova Science Publishers Inc., p29–74.
Leberfinger AN, Dinda S, Wu Y, et al., 2019, Bioprinting Functional Tissues. Acta Biomater, 95:32–49. https://doi.org/10.1016/j.actbio.2019.01.009
Gibson I, Rosen D, Stucker B, 2015, The Impact of Low-Cost AM Systems. In: Additive Manufacturing Technologies. 2nd ed. New York, USA: Springer, p293–301.
Panwar A, Tan LP, 2016, Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting. Molecules, 21:685. https://doi.org/10.3390/molecules21060685
Midha S, Dalela M, Sybil D, et al., 2019, Advances in 3D Bioprinting of Bone: Progress and Challenges. J Tissue Eng Regen Med, 13:925–45. https://doi.org/10.1002/term.2847
Gudapati H, Dey M, Ozbolat I, 2016, A Comprehensive Review on Droplet-Based Bioprinting: Past, Present and Future. Biomaterials, 102:20–42. https://doi.org/10.1016/j.biomaterials.2016.06.012
Hansen CJ, Saksena R, Kolesky DB, et al., 2013, High-Throughput Printing Via Microvascular Multinozzle Arrays. Adv Mater, 25:96–102. https://doi.org/10.1002/adma.201203321
Kim JD, Choi JS, Kim BS, et al., 2010, Piezoelectric Inkjet Printing of Polymers: Stem Cell Patterning on Polymer Substrates. Polymer, 51:2147–54.
Skardal A, Zhang J, Prestwich GD, 2010, Bioprinting Vessel-Like Constructs Using Hyaluronan Hydrogels Crosslinked with Tetrahedral Polyethylene Glycol Tetracrylates. Biomaterials, 31:6173–81 https://doi.org/10.1016/j.biomaterials.2010.04.045
Gruene M, Pflaum M, Hess C, et al., 2011, Laser Printing of Three-Dimensional Multicellular Arrays for Studies of Cell-Cell and Cell-Environment Interactions. Tissue Eng Part C Methods, 17:973–82. https://doi.org/10.1089/ten.TEC.2011.0185
Gittard SD, Narayan RJ, 2010, Laser Direct Writing of Micro and Nano-Scale Medical Devices. Expert Rev Med Devices, 7:343–56. https://doi.org/10.1586/erd.10.14
Erben A, Hörning M, Hartmann B, et al., 2020, Precision 3D-Printed Cell Scaffolds Mimicking Native Tissue Composition and Mechanics. Adv Healthc Mater, 9:e2000918. https://doi.org/10.1002/adhm.202000918
Liu L, Wang X, 2015, Creation of a Vascular System for Complex Organ Manufacturing. Int J Bioprinting, 1:77–86.
Heinrich MA, Liu W, Jimenez A, et al., 2019, 3D Bioprinting: From Benches to Translational Applications. Small, 15:e1805510. https://doi.org/10.1002/smll.201805510
Wang X, Ao Q, Tian X, et al., 2017, Gelatin-Based Hydrogels for Organ 3D Bioprinting. Polymers, 9:401. https://doi.org/10.3390/polym9090401
Wang X, 2019, Advanced Polymers for Three-Dimensional (3D) Organ Bioprinting. Micromachines, 10:814. https://doi.org/10.3390/mi10120814
Suri S, Han LH, Zhang W, et al., 2011, Solid Freeform Fabrication of Designer Scaffolds of Hyaluronic Acid for Nerve Tissue Engineering. Biomed Microdevices, 13:983–93. https://doi.org/10.1007/s10544-011-9568-9
Lin H, Zhang D, Alexander PG, et al., 2013, Application of Visible Light-Based Projection Stereolithography for Live Cell-scaffold Fabrication with Designed Architecture. Biomaterials, 34:331–9. https://doi.org/10.1016/j.biomaterials.2012.09.048
Laschke MW, Rücker M, Jensen G, et al., 2008, Incorporation of Growth Factor Containing Matrigel Promotes Vascularization of Porous PLGA Scaffolds. J Biomed Mater Res A, 85:397–407. https://doi.org/10.1002/jbm.a.31503
Hinton TJ, Jallerat Q, Palchesko RN, et al., 2015, Three-Dimensional Printing of Complex Biological Structures by Freeform Reversible Embedding of Suspended Hydrogels. Sci Adv, 1:e1500758. https://doi.org/10.1126/sciadv.1500758
Golden AP, Tien J, 2007, Fabrication of Microfluidic Hydrogels Using Molded Gelatin as a Sacrificial Element. Lab Chip, 7:720–5. https://doi.org/10.1039/b618409j
Lee VK, Kim DY, Ngo H, et al., 2014, Creating Perfused Functional Vascular Channels using 3D Bio-Printing Technology. Biomaterials, 35:8092–102. https://doi.org/10.1016/j.biomaterials.2014.05.083
Zhao L, Lee VK, Yoo SS, et al., 2012, The Integration of 3-D Cell Printing and Mesoscopic Fluorescence Molecular Tomography of Vascular Constructs Within Thick Hydrogel Scaffolds. Biomaterials, 33:5325–32. https://doi.org/10.1016/j.biomaterials.2012.04.004
Novosel EC, Kleinhans C, Kluger PJ, 2011, Vascularization is the Key Challenge in Tissue Engineering. Adv Drug Deliv Rev, 63:300–11. https://doi.org/10.1016/j.addr.2011.03.004
Lei M, Wang X, 2015, Uterus Bioprinting. In: Wang X, editor. Organ Manufacturing. Hauppauge, NY, USA: Nova Science Publishers Inc., p335–55.
Ekblom O, Ek A, Cider Å, et al., 2018, Increased Physical Activity Post-Myocardial Infarction is Related to Reduced Mortality: Results From the SWEDEHEART Registry. J Am Heart Assoc, 7:e010108. https://doi.org/10.1161/JAHA.118.010108
Li J, Cai Z, Cheng J, et al., 2020, Characterization of a Heparinized Decellularized Scaffold and its Effects on Mechanical and Structural Properties. J Biomater Sci Polym Ed, 31:999–1023. https://doi.org/10.1080/09205063.2020.1736741
Gao RL, Zhang S, Wang ZW, et al., 2019, The Development of Cardiology in China in 70 Years since the Founding of the People’s Republic of China (Excerpts). Chin J Card Arrhythm, 23:459–60.
Mironov V, Boland T, Trusk T, et al., 2003, Organ Printing: Computer-Aided Jet-Based 3D Tissue Engineering. Trends Biotechnol, 21:157–61. https://doi.org/10.1016/S0167-7799(03)00033-7
Nakamura M, Kobayashi A, Takagi F, et al., 2005, Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells. Tissue Eng, 11:1658–66.
Leong KF, Cheah CM, Chua CK, 2003, Solid Freeform Fabrication of Three-Dimensional Scaffolds for Engineering Replacement Tissues and Organs. Biomaterials, 24:2363–78.
Noor N, Shapira A, Edri R, et al., 2019, 3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts. Adv Sci, 6:1900344.
Lee A, Hudson AR, Shiwarski DJ, et al., 2019, 3D Bioprinting of Collagen to Rebuild Components of the Human Heart. Science, 365:482–7. https://doi.org/10.1126/science.aav9051
Duan B, Kapetanovic E, Hockaday LA, et al., 2014, Three- Dimensional Printed Trileaflet Valve Conduits Using Biological Hydrogels and Human Valve Interstitial Cells. Acta Biomater, 10:1836–46. https://doi.org/10.1016/j.actbio.2013.12.005
Hockaday LA, Duan B, Kang KH, et al., 2014, 3D Printed Hydrogel Technologies for Tissue Engineered Heart Valves. 3D Print Addit Manuf, 1:122–36.
Grigoryan B, Paulsen SJ, Corbett DC, et al., 2019, Multivascular Networks and Functional Intravascular Topologies within Biocompatible Hydrogels. Science, 364:458–64. https://doi.org/10.1126/science.aav9750
Yan Y, Wang X, Pan Y, et al., 2005, Fabrication of Viable Tissue-Engineered Constructs with 3D Cell-Assembly Technique. Biomaterials, 26:5864–71. https://doi.org/10.1016/j.biomaterials.2005.02.027
Wang X, Yan Y, Pan Y, et al., 2006, Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System. Tissue Eng, 12:83–90. https://doi.org/10.1089/ten.2006.12.83
Yan Y, Wang X, Xiong Z, et al., 2005, Direct Construction of a Three-Dimensional Structure with Cells and Hydrogel. J Bioact Compat Polym, 20:259–69.
Sui S, Wang X, Liu P, et al., 2009, Cryopreservation of Cells in 3D Constructs Based on Controlled Cell Assembly Processes. J Bioact Compat Polym, 24:473–87.
Wang X, Paloheimo KS, Xu H, et al., 2010, Cryopreservation of Cell/Hydrogel Constructs Based on a New Cell-Assembling Technique. J Bioact Compat Polym, 25:634–53.
Wang X, Yan Y, Zhang R, 2007, Rapid Prototyping as Tool for Manufacturing Bioartificial Livers. Trends Biotechnol, 25:505–13. https://doi.org/10.1016/j.tibtech.2007.08.010
Wang X, Xu H, 2010, Incorporation of DMSO and Dextran-40 into a Gelatin/Alginate Hydrogel for Controlled Assembled Cell Cryopreservation. Cryobiology, 61:345–51. https://doi.org/10.1016/j.cryobiol.2010.10.161
Li S, Yan Y, Xiong Z, et al., 2009, Gradient Hydrogel Construct Based on an Improved Cell Assembling System. J Bioact Compat Polym, 24:84–99.
Xiao W, He J, Nichol JW, et al., 2011, Synthesis and Characterization of Photocrosslinkable Gelatin and Silk Fibroin Interpenetrating Polymer Network Hydrogels. Acta Biomater, 7:2384–93. https://doi.org/10.1016/j.actbio.2011.01.016
Kang HW, Lee SJ, Ko IK, et al., 2016, A 3D Bioprinting System to Produce human-Scale Tissue Constructs with Structural Integrity. Nat Biotechnol, 34:312–31.
Yao R, Zhang R, Yan Y, et al., 2009, In Vitro Angiogenesis of 3D Tissue Engineered Adipose Tissue. J Bioact Co0020mpat Polym, 24:5–24.
Xu M, Yan Y, Liu H, et al., 2009, Control Adipose-Derived Stromal Cells Differentiation into Adipose and Endothelial Cells in a 3-D Structure Established by Cell-Assembly Technique. J Bioact Compat Polym, 24:31–47.
Xu M, Wang X, Yan Y, et al., 2010, A Cell-Assembly Derived Physiological 3D Model of the Metabolic Syndrome, Based on Adipose-Derived Stromal Cells and a Gelatin/Alginate/Fibrinogen Matrix. Biomaterials, 31:3868–77. https://doi.org/10.1016/j.biomaterials.2010.01.111
Xu W, Wang X, Yan Y, et al., 2008, Rapid Prototyping of Polyurethane for the Creation of Vascular Systems. J Bioact Compat Polym, 23:103–14.
Wang X, Cui T, Yan Y, et al., 2009, Peroneal Nerve Regeneration along a New Polyurethane-Collagen Guide Conduit. J Bioact Compat Polym, 24:109–27.
Huang Y, He K, Wang X, 2013, Rapid Prototyping of a Hybrid Hierarchical Polyurethane-Cell/Hydrogel Construct for Regenerative Medicine. Mater Sci Eng C, 33:3220–9. https://doi.org/10.1016/j.msec.2013.03.048
Xu W, Wang X, Yan Y, et al. 2008, A Polyurethane-Gelatin Hybrid Construct for the Manufacturing of Implantable Bioartificial Livers. J Bioact Compat Polym, 23:409–22.
He K, Wang X, 2011, Rapid Prototyping of Tubular Polyurethane and Cell/Hydrogel Constructs. J Bioact Compat Polym, 26:363–74.
Wang X, Yan Y, Zhang R, 2010, Recent Trends and Challenges in Complex Organ Manufacturing. Tissue Eng Part B, 16:189–97. https://doi.org/10.1089/ten.TEB.2009.0576
Wang X, 2012, Intelligent Freeform Manufacturing of Complex Organs. Artificial Organs, 36:951–61. https://doi.org/10.1111/j.1525-1594.2012.01499.x
Liu L, Yan Y, Xiong Z, et al., 2008, A Novel Poly (Lacticco- glycolic acid)-collagen Hybrid Scaffold Fabricated via Multi-nozzle Low-Temperature Deposition. In: da Silva Bártolo PJ, Jorge AM, da Conceicao Batista F, et al., editors. The 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping. Virtual rapid manufacturing? London: ©Taylor and Francis Group.
Wang X, Rijff BL, Khang G, 2015, A Building Block Approach into 3D Printing a Multi-Channel Organ Regenerative Scaffold. J Tissue Eng Regen Med, 11:1403.
Liu F, Wang X, 2020, Synthetic Polymers for Organ 3D Printing. Polymers, 12:1765. https://doi.org/10.3390/polym12081765
Zhang T, Yan, YN, Wang X, et al., 2007, Three-Dimensional Gelatin and Gelatin/Hyaluronan Hydrogel Structures for Traumatic Brain Injury. J Bioact Compat Polym, 22:19–29.
Zhao X, Du S, Chai L, et al., 2015, Anti-Cancer Drug Screening Based on an Adipose-Derived Stem Cell/Hepatocyte 3D Printing Technique. J Stem Cell Res Ther, 5:273.
Zhou X, Liu C, Zhao X, et al., 2016, A 3D Bioprinting Liver Tumor Model for Drug Screening. World J Pharm Pharm Sci, 5:196–213.
Wang X, 2015, Drug Delivery Design for Regenerative Medicine. Curr Pharm Des, 21:1503–5. https://doi.org/10.2174/138161282112150220122841
Chang CC, Boland ED, Williams SK, et al., 2011, Direct-Write Bioprinting Three-Dimensional Biohybrid Systems for Future Regenerative Therapies. J Biomed Mater Res B Appl Biomater, 98:160–70. https://doi.org/10.1002/jbm.b.31831
Miller JS, Stevens KR, Yang MT, et al., 2012, Rapid Casting of Patterned Vascular Networks for Perfusable Engineered Three-Dimensional Tissues. Nat Mater, 11:768–74. https://doi.org/10.1038/nmat3357
Birchall M, De Coppi P, 2016, Novel Approach to In-Vivo Oesophageal Regeneration. Lancet, 388:6–7. https://doi.org/10.1016/S0140-6736(16)00649-8
Xu Y, Li D, Wang X, 2015, The Construction of Vascularized Pancreas Based on 3D Printing Techniques. In: Wang XH, editor. Organ Manufacturing. New York, USA: Nova Science Publishers Inc., p245–68.
Uchida T, Onoe H, 2019, 4D Printing of Multi-Hydrogels using Direct Ink Writing in a Supporting Viscous Liquid. Micromachines, 10:433. https://doi.org/10.3390/mi10070433
Tsigkou O, Pomerantseva I, Spencer JA, et al., 2010, Engineered Vascularized Bone Grafts. Proc Natl Acad Sci U S A, 107:3311–6. https://doi.org/10.1073/pnas.0905445107
Wang J, Yang M, Zhu Y, et al., 2014, Phage Nanofibers Induce Vascularized Osteogenesis in 3D Printed Bone Scaffolds. Adv Mater, 26:4961–6. https://doi.org/10.1002/adma.201400154
Santos MI, Reis RL, 2010, Vascularization in Bone Tissue Engineering: Physiology, Current Strategies, Major Hurdles and Future Challenges. Macromol Biosci, 10:12–27. https://doi.org/10.1002/mabi.200900107
Temple JP, Hutton DL, Hung BP, et al., 2014, Engineering Anatomically Shaped Vascularized Bone Grafts with hASCs and 3D-Printed PCL Scaffolds. J Biomed Mater Res A, 102:4317–25. https://doi.org/10.1002/jbm.a.35107
Yan Y, Chen H, Zhang H, et al., 2019, Vascularized 3D Printed Scaffolds for Promoting Bone Regeneration. Biomaterials, 190–1:97–110.
Potier E, Ferreira E, Dennler S, et al., 2008, Desferrioxamine-Driven Upregulation of Angiogenic Factor Expression by Human Bone Marrow Stromal Cells. J Tissue Eng Regen Med, 2:272–8. https://doi.org/10.1002/term.92
Kim JY, Cho DW, 2009, Blended PCL/PLGA Scaffold Fabrication Using Multi-Head Deposition System. Microelectron Eng, 86:1447–50.
Schwartz JJ, Boydston AJ, 2019, Multimaterial Actinic Spatial Control 3D and 4D Printing. Nat Commun, 10:791. https://doi.org/10.1038/s41467-019-08639-7
Wang X, 2013, Overview on Biocompatibilities of Implantable Biomaterials. In: Lazinica R, editor. Advances in Biomaterials Science and Biomedical Applications in Biomedicine. Rijeka, Croatia: InTech, p111–55.
Wang X, Ma J, Wang Y, et al., 2002, Bone Repair in Radii and Tibias of Rabbits with Phosphorylated Chitosan Reinforced Calcium Phosphate Cements. Biomaterials, 23:4167–76. https://doi.org/10.1016/s0142-9612(02)00153-9
Wang X, Ma J, Feng Q, et al., 2002, Skeletal Repair in of Rabbits with Calcium Phosphate Cements Incorporated Phosphorylated Chitin Reinforced. Biomaterials, 23:4591–600. https://doi.org/10.1016/s0142-9612(02)00205-3
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Shenglong Li, Siyu Liu, Xiaohong Wang
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
