• Data for the paper "A Dissection and Enhancement Technique for Combined Damage Characterisation in Composite Laminates using Laser-line Scanning Thermography". 

  Liu, Haochen; Du, Robin; Yazdani, Hamed; Starr, Andrew; Zhao, Yifan (Cranfield University, 2021-05-27)

  This is the dataset for paper "A Dissection and Enhancement Technique for Combined Damage Characterisation in Composite Laminates using Laser-line Scanning Thermography". It contains the the simulation and experimental ...
• Data for the paper titled "Novel method to additively manufacture denser graphite structures using Binder Jetting Printing" 

  Goel, Saurav (Cranfield University, 2020-12-07)

  All data submitted to Scientific Reports in Nature is provided herewith.
• Immersive robotics experiments - Telexistence PhD (videos) 

  Mazeas, Damien (Cranfield University, 2023-09-25)

  This page contains a list of videos illustrating some of the experiments carried out during Mr. Mazeas's thesis on telexistence.
• Data: Characterisation of Cognitive Load using Machine Learning Classifiers of Electroencephalogram Data 

  Wang, Qi (Cranfield University, 2023-08-17)

  A high cognitive load can overload a person resulting in catastrophic accidents, it is therefore important to ensure the cognitive load of a safety-critical task (such as driving a vehicle) is at a manageable level. Although ...
• Data supporting: 'An automated surface determination approach for computed tomography' 

  Yang, Xiuyuan; Giusca, Claudiu; Sun, Wenjuan (Cranfield University, 2022-08-31)

  This dataset contains the reconstructed simulation data, MCW surface point clouds, measurement results used for Fig 14 and Fig 16.
• Data supporting: 'Multi-Energy Source (MES) Configuration for Bead Shape Control in Wire-based Directed Energy Deposition (w-DED)' 

  Chen, Guangyu; Suder, Wojciech; Williams, Stewart; Ding, Jialuo; Wang, Chong (Cranfield University, 2022-08-31)

  Video shows the the dynamic changing of the melt pool and highspeed scanning motion of the laser beam.
• Data relating to: "Dynamic multistep uncertainty prediction in spatial geometry" (2020) 

  Grenyer, Alex; Schwabe, Oliver; ahmet Erkoyuncu, John; Zhao, Yifan (Cranfield University, 2021-02-12)

  Excel file corresponding to training data and results in conference paper - applied in MATLABImages: Figures 1-4 as in conference paperVideo: 3D plot rotationVideo: Conference presentation
• 'Optimisation of an in-process lineal dielectric sensor for liquid moulding of carbon fibre composites' 

  Mesogitis, Tassos; Asareh, Mehdi; Skordos, Alex; Maistros, George; Lira, Christian (Cranfield University, 2020-11-04)

  Data: -RTM experiment - 4 bar clamping pressure.xlsx Excel spreadsheet containing the impedance/admittance signals and corresponding covered length for the the PI-LD lineal sensor alongside the visual flow front measurements ...
• Data for paper entitled "Laser stabilization of GMAW additive manufacturing of Ti-6Al-4V components" 

  Rodrigues Pardal, Goncalo; Martina, Filomeno; Williams, Stewart (Cranfield University, 2019-05-09)

  Data used in paper "Laser stabilization of GMAW additive manufacturing of Ti-6Al-4V components"
• 'Quantifying uncertainty in pulsed thermography inspection by analysing the thermal diffusivity measurements of metals and composites - Dataset to reconstruct the results presented in the paper' 

  Addepalli, Pavan; Zhao, Yifan; ahmet Erkoyuncu, John; Roy, Rajkumar (Cranfield University, 2021-08-14)

  'This is the underlying dataset for the paper based on which uncertainty quantification was carried out.'
• Data supporting: 'In-process nip point temperature estimation in automated tape placement based on analytical solution and remote thermal measurements' 

  Danezis, Anastasios; Skordos, Alex; Williams, David (Cranfield University, 2022-08-31)

  FE and 1D predictions comparison: nip point temperature estimates by the analytical scheme and FE model.Inverse solution data: tool surface temperatures before and after the addition of Gaussian noise, irradiance profile ...
• Data supporting 'Hybrid recommendations and dynamic authoring for AR knowledge capture and re-use in diagnosis applications' 

  ahmet Erkoyuncu, John (Cranfield University, 2023-02-16)

  In Industry 4.0, integrated data management is an important challenge due to heterogeneity and the lack of structure of numerous existing data sources. A relevant research gap involves human knowledge integration, especially ...
• Suppression of molten salt corrosion by plasma sprayed Ni3Al coatings - data 

  Aria, Indrat (Cranfield University, 2021-12-18)

  Fig. 1 (a) Schematics of air plasma spray deposition of Ni3Al coatings and molten nitrate salt tests at 565 °C. Ni3Alpowder is melted in a stream of plasma at atmospheric pressure and propelled towards the substrate. Each ...
• Insertion of large diameter through-thickness metallic pins in composites: dataset 

  Neale, Geoffrey; Skordos, Alex (Cranfield University, 2022-03-16)

  Force vs Displacement Data.xlsx - Contains all the raw force versus displacement data for the insertion tests carried out in the associated publication.Thermal Ageing Analysis.xlsx - Contains the DSC data (time, temperature, ...
• Data for the paper "Pattern Recognition of Barely Visible Impact Damage in Carbon Composites using Pulsed Thermography" 

  Zhao, Yifan; Addepalli, Pavan (Cranfield University, 2021-12-14)

  Please find the attachment.
• Remote Ultrasonic Imaging of a Wire Arc Additive Manufactured Ti-6Al-4V Component using Laser Induced Phased Array 

  Lukacs, Peter; Williams, Stewart; Davis, Geo; Macleod, Charles; Stratoudaki, Theodosia; Gachagan, Anthony (Cranfield University, 2021-08-18)

  Supporting dataset for the publication: "Remote Ultrasonic Imaging of a Wire Arc Additive Manufactured Ti-6Al-4V Component using Laser Induced Phased Array".The file contains all the signals used to produce the images in ...
• A head mounted augmented reality design practise for maintenance assembly 

  Ariansyah, Dedy (Cranfield University, 2021-08-18)

  This is the experimental data used to examine the impact of different AR HMD modalities on task performance, system usability, and user safety
• Data supporting 'Thermal response of multi-layer UV crosslinked PEGDA hydrogels' 

  Hakim Khalili, Mohammad; Afsar, Ashfaq; Zhang, Rujing; Wilson, Sandra; Goel, Saurav; Impey, Sue; Aria, Adrianus (Cranfield University, 2023-02-16)

  All data sets are raw data from thermoresponse behaviour of hydrogels. 1. Swelling test for multi-150 um hydrogels with 1.8 mg/ml of photoabsorber.2. Swelling test for mono-5 mm hydrogels with 0 mg/ml of photoabsorber.3. ...
• Dataset for Understanding and designing post-build rolling for mitigation of residual stress and distortion in wire arc additively manufactured components 

  Gornyakov, Valeriy; Ding, Jialuo; Sun, Yongle; Williams, Stewart (Cranfield University, 2022-01-10)

  Dataset for Figure 9 Influence of friction coefficient on longitudinal PS in the WAAM built component after rolling: a) flat roller, b) profiled roller, and c) slotted roller (F = 50 kN). Dataset for Figure 10 Vertical ...
• Videos for Fig. 15 with a small and a large laser beam diameter, respectively. 

  Wang, Chong; Suder, Wojciech; Ding, Jialuo; Williams, Stewart (Cranfield University, 2021-07-19)

  These are two supplementary videos for Fig 15, showing deposition process with two different laser beam diameters (12 mm and 2 mm, respectively) in wire based PTA-laser hybrid additive manufacture.

View more