Abstract
Straight Darrieus wind turbine has attractive characteristics such as the ability to accept wind from random direction and easy installation and maintenance. But its aerodynamic performance is very complicated, especially for the existence of dynamic stall. How to get better aerodynamic performance arouses lots of interests in the design procedure of a straight Darrieus wind turbine. In this paper, mainly the effects of number of blades and tip speed ratio are discussed. Based on the numerical investigation, an assumed asymmetric straight Darrieus wind turbine is proposed to improve the averaged power coefficient. As to the numerical method, the flow around the turbine is simulated by solving the 2D unsteady Navier-Stokes equation combined with continuous equation. The time marching method on a body-fitted coordinate system based on MAC (Marker-and-Cell) method is used. O-type grid is generated for the whole calculation domain. The characteristics of tangential and normal force are discussed related with dynamic stall of the blade. Averaged power coefficient per period of rotating is calculated to evaluate the eligibility of the turbine.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Camelli, F.E., Löhner, R., 2002. Combining the Baldwin Lomax and Smagorinsky Turbulence Models to Calculate Flows with Separation Regions. 40th AIAA Aerospace Sciences Meeting & Exhibit.
Eriksson, S., Bernhoff, H., Leijon, M., 2007. Evaluation of different turbine concepts for wind power. Renewable and Sustainable Energy Reviews (in Press). [doi:10.1016/j.rser.2006.05.017]
Horiuchi, K., Seki, K., 2003. Flow analysis of straight wing vertical axis type wind turbine for power generation. IEE J. Transactions on Power and Energy, 123(12):1488–1494. [doi:10.1541/ieejpes.123.1488]
Ishimatsu, K., Kage, K., Okubayashi, T., 1995. Numerical Simulation for flow fields of Darrieus turbine. Transactions of Japan Society of Mechanical Engineering, 61:187–192.
Islam, M., Ting, D.S.K., Fartaj, A., 2007. Aerodynamic models for Darrieus-type straight-bladed vertical axis wind turbines. Renewable and Sustainable Energy Reviews (in Press). [doi:10.1016/j.rser.2006.10.023]
Jiang, Z.C., 2005. Numerical Investigation on the Flow and Power Generation of Straight Darrieus Wind Turbine in Low Reynolds Number Turbulent Flow. Ph.D Thesis, Hiroshima University, Japan.
Jiang, Z.C., Doi, Y., 2005. Numerical investigation on principal design parameters of straight Darrieus wind turbine. Transactions of the West-Japan Society of Naval Architects, 109:151–160.
Jiang, Z.C., Doi, Y., Iwashita, H., 2004. Numerical study of the flow around a straight Darrieus turbine. Transactions of the West-Japan Society of Naval Architects, 108:85–93.
Oler, J.W., Strickland, J.H., Im, B.J., Graham, G.H., 1983. Dynamics Stall Regulation of the Darrieus Turbine. SANDIA Technical Report SAND83-7029.
Paraschivoiu, I., 2002. Wind Turbine Design with Emphasis on Darrieus Concept. Polytechnic International Press, Montreal, Canada, p.359–381.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jiang, Zc., Doi, Y. & Zhang, Sy. Numerical investigation on the flow and power of small-sized multi-bladed straight Darrieus wind turbine. J. Zhejiang Univ. - Sci. A 8, 1414–1421 (2007). https://doi.org/10.1631/jzus.2007.A1414
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.2007.A1414