|
|
 |
ISSN for PRINT: 1065-3090
Institutional price: |
$586.00 |
Issues per year: |
4 |
2004, Volume11
|
88 pages |
|

|
Issue price - $154.00
|
 |
EFFECTS OF BUBBLE SHAPE ASSUMPTION ON SINGLE BUBBLE GROWTH BEHAVIOR IN NUCLEATE POOL BOILING
Jeongbae
Kim
Department of Mechanical Engineering, Two-phase Flow Lab., Pohang University of Science and Technology, San 31, Hyoja Dong, Pohang 790-784, Korea
Han Choon
Lee
Department of Mechanical Engineering, Pohang University of Science and Technology San 31, Hyoja Dong, Pohang 790-784, Korea
Byung Do
Oh
Department of Mechanical Engineering, Pohang University of Science and Technology San 31, Hyoja Dong, Pohang 790-784, Korea
Moo Hwan
Kim
Department of Mechanical Engineering, Pohang University of Science and Technology San 31, Hyoja Dong, Pohang 790-784, Korea
ABSTRACT
Analytical research was performed to show the effects of bubble shape assumption on the equivalent bubble radius and heat flow rate behavior during bubble growth, based on experimental results for saturated nucleate pool boiling. The equivalent bubble radius was calculated from bubble images captured during the growth phase using the shape assumption for bubble geometry. The heat flow rate was measured using a microscale heater array and a Wheatstone bridge circuit controller. A theoretical analysis was then performed to illustrate that the form of the bubble shape assumption is very important when analyzing single bubble growth behavior.
|
|
Article price - $35.00 |
 |
|
 |