Abstract

The extraction conditions (liquid-solid ratio, temperature and time) of antioxidant polysaccharides from Auricularia auricula fruiting bodies (AAFB) were optimized using response surface methodology (RSM). The Box-Behnken experimental results showed the optimum extraction conditions as follows: a liquid-solid ratio of 38.77 mL/g, a temperature of 93.98 °C and a time of 3.41 h. Under these conditions, the maximal polysaccharide yield was 10.46 g/100 g. In addition, AAFB polysaccharides exhibited stronger antioxidant activities by evaluating of Fe²⁺-chelating ability and hydroxyl radical scavenging activity with IC₅₀ values of 0.43 and 0.38 mg/mL, respectively. These results indicated that AAFB polysaccharides might be potentially used as a natural antioxidant.

Keywords:
Auricularia auricula ; polysaccharide; extraction; antioxidant activity

1 Introduction

Active oxygen and free radicals are increasingly being recognized as being responsible for the pathogenesis of certain human diseases, including cancer, aging and chronic arterial disease (Moskovitz et al., 2002Moskovitz, J., Yim, M. B., & Chock, P. B. (2002). Free radicals and disease. Archives of Biochemistry and Biophysics, 397(2), 354-359. http://dx.doi.org/10.1006/abbi.2001.2692. PMid:11795894.
http://dx.doi.org/10.1006/abbi.2001.2692... ). In order to reduce the oxidative damage of active oxygen and free radicals, some synthetic antioxidants such as butylated hydroxytoluene (BHT), butylated hydroxyanisole (BHA) are widely used in food industry. Nowadays, natural antioxidants have become increasingly popular among consumers because synthetic antioxidants are often perceived as undesirable or harmful (Tu et al, 2009Tu, Y., Sun, Y., Tian, Y., Xie, M., & Chen, J. (2009). Physicochemical characterisation and antioxidant activity of melanin from the muscles of Taihe Black-bone silky fowl (Gallus gallus domesticus Brisson). Food Chemistry, 114(4), 1345-1350. http://dx.doi.org/10.1016/j.foodchem.2008.11.015.
http://dx.doi.org/10.1016/j.foodchem.200... ). Therefore, there is an increasing interest in studying natural antioxidants that can be used in food processing to improve body’s antioxidant defenses and reduce the oxidative stress to human body.

The edible mushroom not only is a good source of nutrients, including protein, vitamin and dietary fiber, but also contains a variety of bioactive substances, such as polysaccharides, cordycepin and lectin (Xie et al., 2010Xie, C., Gu, Z., You, X., Liu, G., Tan, Y., & Zhang, H. (2010). Screening of edible mushrooms for release of ferulic acid from wheat bran by fermentation. Enzyme and Microbial Technology, 46(2), 125-128. http://dx.doi.org/10.1016/j.enzmictec.2009.10.005.
http://dx.doi.org/10.1016/j.enzmictec.20... ). Previous publications indicate that some mushroom polysaccharides, isolated from Lentinus edodes, Agaricus nevoi, Coprinus comatus and Daedalea quercina, are found to have strong antioxidant activity (Asatiani et al., 2008Asatiani, M. D., Kachlishvili, E. T., Khardziani, T. S., Metreveli, E. M., Mikiashvili, N. A., Songulashvili, G. G., Tsiklauri, N. D., Wasser, S. P., & Elisashvili, V. I. (2008). Basidiomycetes as a source of antioxidants, lectins, polysaccharides, and enzymes. Journal of Biotechnology, 136S, S717-S742. http://dx.doi.org/10.1016/j.jbiotec.2008.07.1706.
http://dx.doi.org/10.1016/j.jbiotec.2008... ; Chen et al., 2012Chen, H., Ju, Y., Li, J., & Yu, M. (2012). Antioxidant activities of polysaccharides from Lentinus edodes and their significance for disease prevention. International Journal of Biological Macromolecules, 50(1), 214-218. http://dx.doi.org/10.1016/j.ijbiomac.2011.10.027. PMid:22085754.
http://dx.doi.org/10.1016/j.ijbiomac.201... ). In addition, most of mushroom polysaccharides are relatively nontoxic and do not cause significant side effects (Wasser & Weis, 1999Wasser, S. P., & Weis, A. L. (1999). Medicinal properties of substances occurring in higher basidiomycetes mushroom: Current perspective. International Journal of Medicinal Mushrooms, 1(1), 31-51. http://dx.doi.org/10.1615/IntJMedMushrooms.v1.i1.30.
http://dx.doi.org/10.1615/IntJMedMushroo... ; Zhang et al., 2007Zhang, M., Cui, S. W., Cheung, P. C. K., & Wang, Q. (2007). Antitumor polysaccharides from mushrooms: a review on their isolation process, structural characteristics and antitumor activity. Trends in Food Science & Technology, 18(1), 4-19. http://dx.doi.org/10.1016/j.tifs.2006.07.013.
http://dx.doi.org/10.1016/j.tifs.2006.07... ). Thus, mushroom polysaccharides have great development potential as a natural antioxidant.

Auricularia auricula (A. auricula) is a macro-fungus distributed in the Northeast Provinces of China. It has been used as food and drug in China for a long time. Fruiting bodies of A. auricula are rich in polysaccharides and are increasingly popular as a health food in China (Zou et al., 2013Zou, Y., Yang, Y., Zeng, B., Gu, Z., & Han, Y. (2013). Comparison of physicochemical properties and antioxidant activities of melanins from fruit-bodies and fermentation broths of Auricularia auricula.International Journal of Food Properties, 16(4), 803-813. http://dx.doi.org/10.1080/10942912.2011.567433.
http://dx.doi.org/10.1080/10942912.2011.... ). Polysaccharide is considered to be one of the most important functional components in these health foods. However, most of this macro-fungus product is only used as cuisine materials, and many of its functional components are not fully developed and employed.

Response surface methodology (RSM) is an affective statistical technique for optimizing complex processes. It is wide used in optimizing the process variables. The extraction conditions of mushroom polysaccharides from Cordyceps militaris and Pleurotus eryngii have been optimized using RSM with Box-Behnken design (Chen et al., 2014Chen, R., Jin, C., Li, H., Liu, Z., Lu, Z., Li, S., & Yang, S. (2014). Ultrahigh pressure extraction of polysaccharides from . Cordyceps militarisand evaluation of antioxidant activitySeparation and Purification Technology,134(25), 90-99. http://dx.doi.org/ 10.1016/j.seppur.2014.07.017.
http://dx.doi.org/ 10.1016/j.seppur.2014... ; Zhang et al., 2014Zhang, A., Li, X., Xing, C., Yang, J., & Sun, P. (2014). Antioxidant activity of polysaccharide extracted from Pleurotus eryngii using response surface methodology. International Journal of Biological Macromolecules, 65, 28-32. http://dx.doi.org/10.1016/j.ijbiomac.2014.01.013. PMid:24418337.
http://dx.doi.org/10.1016/j.ijbiomac.201... ). It is considered that liquid-solid ratio, temperature and time are main parameters that can influence polysaccharide yield (Zhang et al., 2015Zhang, Z. F., Lv, G. Y., Jiang, X., Cheng, J. H., & Fan, L. F. (2015). Extraction optimization and biological properties of a polysaccharide isolated from . Gleoestereum incarnatumCarbohydrate Polymers, 117, 185-191. http://dx.doi.org/10.1016/j.carbpol.2014.09.059. PMid:25498624.
http://dx.doi.org/10.1016/j.carbpol.2014... ).

The objective of this study was to develop an economical and efficient extraction of antioxidant polysaccharides from A. auricula fruit bodies (AAFB), and to investigate the effect of extraction parameters on polysaccharide yield. RSM was employed to optimize extraction conditions (liquid-solid ratio, temperature and time) in order to obtain the maximal polysaccharide yield. Meanwhile, antioxidant activity of AAFB polysaccharides was studied.

2 Materials and methods

2.1 Materials

Eighty grams dried fruiting bodies of A. auricula (grown in Dongning City and harvested in 2014) were purchased from a local market in Dongning City (Heilongjiang Province, China), pulverized and sifted through a 0.42 mm sieve. The powder (moisture content 12-15% on dry basis) stored in dark bags to prevent from moisture and light. BHT was purchased from Sigma Chemicals Co. (St. Louis, USA). All the other chemicals and reagents used in the experiment were of analytical grade.

2.2 Extraction and purification of AAFB polysaccharides

The extraction and purification of AAFB polysaccharides were carried out according to the method of Yan et al. (2014)Yan, F., Yang, X., Liu, C., Huang, S., Liao, L., & Fu, C. (2014). Extraction optimization of antioxidant polysaccharides from leaves of . Gynura bicolor(Roxb. & Willd.) DCFood Science and Technology (Campinas.), 34(2), 402-407. http://dx.doi.org/10.1590/fst.2014.0055.
http://dx.doi.org/10.1590/fst.2014.0055... . In short, fruiting bodies powder of A. auricula was suspended in distilled water at the established volume and then stirred for extraction at the established temperature and time. The mixture was then centrifuged at 5000 rpm for 20 min. The supernatant was concentrated to 1/5 of the original volume by evaporation (DZF-6020 vacuum oven, Shanghai, China) at 45 °C. Three volumes of absolute ethanol were added into the filtered solution and produced polysaccharide precipitate. The precipitated materials were collected by centrifugation at 5000 rpm for 20 min and then purified using the classic Sevag method (Sevag et al., 1938Sevag, M. G., Lackman, D. B., & Smolens, J. (1938). The isolation of the components of streptococcal nucleoproteins in serologically active form. The Journal of Biological Chemistry, 124(2), 425-436.).

2.3 Experimental design

The Box-Behnken experimental design with three factors and three levels was employed to optimize the extraction conditions in order to obtain the highest polysaccharide yield. Liquid-solid ratio (A), temperature (B) and time (C) were chosen as independent variables in this design. Based on the single-factor experiments (data not shown), A (20, 40 and 60 mL/g), B(60, 80 and 100 °C) and C (1, 3 and 5 h) were determined as critical levels with significant effect on polysaccharide extraction. The complete design consisted of seventeen combinations including five replicates of the center point (Table 1).

The experimental results were analyzed by quadratic stepwise regression to fit the second-order Equation 1:

where Y stands for polysaccharide yield, X_i, X_j for independent variables, β₀ for the model intercept and B_i, B_ii, B_ij for regression coefficients of variables for intercept, linear, quadratic and interaction terms, respectively. The software Design-Expert 7.0.0 Trial (State-Ease Inc., Minneapolis, USA) was used to obtain the coefficients of the quadratic polynomial model.

2.4 Determination of polysaccharide content

The determination of polysaccharide content was done by phenol-sulfuric acid method (Yan et al., 2014Yan, F., Yang, X., Liu, C., Huang, S., Liao, L., & Fu, C. (2014). Extraction optimization of antioxidant polysaccharides from leaves of . Gynura bicolor(Roxb. & Willd.) DCFood Science and Technology (Campinas.), 34(2), 402-407. http://dx.doi.org/10.1590/fst.2014.0055.
http://dx.doi.org/10.1590/fst.2014.0055... ). Briefly, 1 mL of crude polysaccharide solution was mixed with 3 mL concentrated sulphuric acid to initiated the reaction, following 0.6 mL of 5% phenol was added and the mixture was kept at 100 °C for 15 min, after cooling to the room temperature, the absorbance of the reaction mixture was measured at 490 nm using a UV-2802 diode array spectrophotometer (UNIC, Princeton, USA). Polysaccharide content was calculated with d-glucose as standard.

2.5 Assessment of antioxidant activity of AAFB polysaccharide

Assay of Fe2+-chelating activity

The chelating activities of polysaccharides and BHT on Fe²⁺ were determined as reported by measuring the formation of ferrous iron-ferrozine complex (Dinis et al., 1994Dinis, T. C. P., Maderia, V. M. C., & Almeida, L. M. (1994). Action of phenolic derivatives (acetaminophen, salicylate, and 5-aminosalicylate) as inhibitors of membrane lipid peroxidation and as peroxyl radical scavengers. Archives of Biochemistry and Biophysics, 315(1), 161-169. http://dx.doi.org/10.1006/abbi.1994.1485. PMid:7979394.
http://dx.doi.org/10.1006/abbi.1994.1485... ). Different concentrations of polysaccharides or BHT (0.2, 0.4, 0.6, 0.8 and 1.0 mg/mL) were mixed with 3.7 mL of deionized water, and then reacted with FeSO₄ (2 mM, 0.1 mL). The reaction was allowed to proceed for 30 s. After 0.2 mL of 5 mM ferrozine was added, the solution was mixed, left to stand for 10 min at room temperature, and then the mixture absorbance was determined at 562 nm. The chelating activity of Fe²⁺ was calculated using the formula given below. IC₅₀ (inhibitory concentration) was the concentration of the sample required to chelate 50% of Fe²⁺(Equation 2).

where A₀ was the absorbance of the control (deionized water, instead of sample), and A₁ was the absorbance of the test sample mixed with reaction solution.

Assay of hydroxyl radical scavenging activity

The scavenging activity of AAFB polysaccharides on hydroxyl radical was determined by the method previously reported by Sun & Kennedy (2010)Sun, Y. X., & Kennedy, J. F. (2010). Antioxidant activities of different polysaccharide conjugates (CRPs) isolated from the fruiting bodies of . Chroogomphis rutilus (Schaeff.: Fr.) O. K. MillerCarbohydrate Polymers, 82(2), 510-514. http://dx.doi.org/10.1016/j.carbpol.2010.05.010.
http://dx.doi.org/10.1016/j.carbpol.2010... . Reaction mixtures in a final volume of 1.0 mL contained deoxyribose (60 mM), phosphate buffer (pH 7.4, 20 mM), ferric trichloride (100 μM), ethylene diamine tetraacetic acid (100 μM), H₂O₂ (1 mM), and different concentrations of polysaccharides or BHT (0.2, 0.4, 0.6, 0.8, and 1.0 mg/mL). The reaction solution was incubated for 1 h at 37 °C, and then 1 mL of 1% thiobarbituric acid and 1 mL of 20% (v/v) HCl were added to the mixture. The mixture was boiled for 15 min and cooled on ice. The absorbance of the resulting mixture was measured at 532 nm. The scavenging activity of hydroxyl radical was calculated according to the formula given below. IC₅₀ (inhibitory concentration) was the concentration of the sample required to scavenge 50% of hydroxyl radicals (Equation 3).

where A_B was the absorbance of the control (deionized water, instead of sample), and A_S was the absorbance of the test sample mixed with reaction solution.

2.6 Statistical analysis

The experimental results were expressed as means ± standard deviation (SD) of triplicates. Statistical analysis was performed using Fisher’s F-test and p<0.05 was regarded as significant.

3 Results and discussion

3.1 Analysis of Box-Behnken experiment

The extraction conditions including liquid-solid ratio, temperature and time as independent variables were optimized for the maximum polysaccharide yield. The Box-Behnken design and the corresponding response values are shown in Table 1.

A second-order polynomial model describing the correlation between polysaccharide yield and the three variables in this study was obtained in Equation 4 below:

The statistical significance of Equation 4 was checked by F-test, and the results of analysis of variance (ANOVA) are shown in Table 2. The model P-value of 0.0145 obtained by ANOVA indicated that the model was significant (p<0.05). Meanwhile, the lack of fit P-value of 0.3836 indicated that the lack of fit was not significant (p>0.05). For the model fitted, the coefficient of determination (R²) was 0.9135 implying that the sample variation of 91.35% for the polysaccharide yield was attributed to the independent variables. These results suggested that the developed model could adequately represent the real relationship among the parameters chosen.

3.2 Effects of liquid-solid ratio, temperature and time on polysaccharides extraction

As is shown in Table 2, temperature had significant linear effect (p<0.05) on polysaccharides extraction; liquid-solid ratio and time had significant quadratic effect (p<0.05) on polysaccharides extraction. However, none of the independent variables (liquid-solid ratio, temperature and time) interacted significantly (p>0.05).

Figure 1 shows the effect of liquid-solid ratio and temperature on polysaccharides extraction from A. auricula fruit bodies at a constant time of 3 h. At a fixed liquid-solid ratio, the polysaccharide yield increased rapidly when temperature reached a certain value (approximately 95 °C), and then leveled off. At a fixed temperature, the polysaccharide yield first increased and then decreased when the liquid-solid ratio was raised, but the variety of polysaccharide yield was slight when the temperature exceeded 85 °C. This indicated that extraction temperature was the principal effect on the polysaccharide yield. At a higher temperature, the solubility of polysaccharides in A. auriculafruit bodies could be enhanced and the viscosity of the solvent decreased. Therefore, the whole extraction of polysaccharides was accelerated. However, increasing extraction temperature might result in more solvent volatilization, more energy cost and more impurities extraction (Lianfu & Zelong, 2008Lianfu, Z., & Zelong, L. (2008). Optimization and comparison of ultrasound/microwave assisted extraction (UMAE) and ultrasonic assisted extraction (UAE) of lycopene from tomatoes. Ultrasonics Sonochemistry, 15(5), 731-737. http://dx.doi.org/10.1016/j.ultsonch.2007.12.001. PMid:18226944.
http://dx.doi.org/10.1016/j.ultsonch.200... ). Therefore, the optimum extraction temperature should be about 95 °C in the present study.

Figure 2 shows the effect of temperature and time on polysaccharide extraction from A. auricula fruit bodies at a constant liquid-solid ratio of 40 mL/g. When time was set, the polysaccharide yield increased rapidly when temperature was raised, which also implied that polysaccharide yield was significantly influenced by temperature. The polysaccharide yield increased when extraction time was extended from 1 to 3.5 h but slowly decreased when time continued to be extended. This phenomenon could be explained in terms of polysaccharides degradation. Biomacromolecule, such as polysaccharides, polyphenols and colorants, might degrade due to long time treatment under high temperature condition (Zou et al., 2010Zou, Y., Xie, C., Fan, G., Gu, Z., & Han, Y. (2010). Optimization of ultrasound-assisted extraction of melanin from Auricularia auricula fruit bodies. Innovative Food Science & Emerging Technologies, 11(4), 611-615. http://dx.doi.org/10.1016/j.ifset.2010.07.002.
http://dx.doi.org/10.1016/j.ifset.2010.0... ). Therefore, extraction time should not exceed 3.5 h in the present work.

Figure 3 shows the effect of liquid-solid ratio and time on polysaccharide extraction from A. auriculafruit bodies at a constant temperature of 80 °C. The increase of both liquid-solid ratio and time accelerated extraction of polysaccharides. However, above the optimal liquid-solid ratio (about 40 mL/g) and time (about 3.5 h), the increase in liquid-solid ratio and time would not further increase the polysaccharide yield. This result was similar to those previously reported by Rodrigues et al. (2008)Rodrigues, S., Pinto, G. A. S., & Fernandes, F. A. N. (2008). Optimization of ultrasound extraction of phenolic compounds from coconut (Cocos nucifera) shell powder by response surface methodology. Ultrasonics Sonochemistry, 15(1), 95-100. http://dx.doi.org/10.1016/j.ultsonch.2007.01.006. PMid:17400017.
http://dx.doi.org/10.1016/j.ultsonch.200... . These findings make the whole process of polysaccharides extraction economically more feasible and efficient in the potential application in food industry.

3.3 Optimization of extraction conditions and verification of model

According to the RSM test results, the optimal extraction conditions to obtain the highest polysaccharide yield were determined as follows: a liquid-solid ratio of 38.77 mL/g, a temperature of 93.98 °C min and a time of 3.41 h. The verification of the model was performed by the method previously reported by Derringer & Suich (1980)Derringer, G., & Suich, R. (1980). Simultaneous optimization of several response variables. Journal of Quality Technology, 12(4), 214-219.. Under the optimal extraction conditions, the polysaccharide yield was 10.46±0.34 g/100 g, and this value was not significantly different (p>0.05) from the predicted value of 10.41 mg/100 g. These data proved that the model designed in this study was valid.

3.4 Fe2+-chelating activity of AAFB polysaccharides

The previous research reported some transition metals, such as Fe²⁺, Cu⁺ and Co²⁺, could trigger process of free radical reaction to magnify the cellular damage (Gungor & Sengul, 2008Gungor, N., & Sengul, M. (2008). Antioxidant activity, total phenolic content and selected physicochemical properties of white mulberry (. Morus Alba L.) fruitsInternational Journal of Food Properties, 11(1), 44-52. http://dx.doi.org/ 10.1080/10942910701558652.
http://dx.doi.org/ 10.1080/1094291070155... ). Among these metal ions, Fe²⁺ was known as the most powerful pro-oxidant due to its high reactivity, which accelerated lipid oxidation by breaking down hydrogen and lipid peroxidase to reactive free radicals via the Fenton reaction (Sun & Kennedy, 2010Sun, Y. X., & Kennedy, J. F. (2010). Antioxidant activities of different polysaccharide conjugates (CRPs) isolated from the fruiting bodies of . Chroogomphis rutilus (Schaeff.: Fr.) O. K. MillerCarbohydrate Polymers, 82(2), 510-514. http://dx.doi.org/10.1016/j.carbpol.2010.05.010.
http://dx.doi.org/10.1016/j.carbpol.2010... ). In this study, ferrozine could react with Fe²⁺ to form red complexes of ferrozine-Fe²⁺. When there was other chelating agent, the ferrozine-Fe²⁺ formation was disrupted which resulted in decrease of red complexes. Fe²⁺-chelating activity of antioxidant could be estimated by measuring absorbance of reaction solution at 562 nm.

The chelating activities of AAFB polysaccharides and BHT on Fe²⁺ are shown in Figure 4. AAFB polysaccharides possessed higher (p<0.05) Fe²⁺-chelating activity than BHT in a concentration-dependent manner. IC₅₀ value (0.43 mg/mL) of AAFB polysaccharides with Fe²⁺-chelating activity was significant lower (p<0.05) than BHT (0.79 mg/mL). At an identical concentration, chelating activity of AAFB polysaccharides on Fe²⁺ was stronger compared to that of polysaccharides from four mushroom Agaricus bisporus, Agaricus brasiliensis, Ganoderma lucidum and Phellinus linteus fruit bodies (Kozarski et al., 2011Kozarski, M., Klaus, A., Niksic, M., Jakovljevic, D., Helsper, J. P. F. G., & Van Griensven, L. J. L. D. (2011). Antioxidative and immunomodulating activities of polysaccharide extracts of the medicinal mushrooms and . Agaricus bisporus, Agaricus brasiliensis, Ganoderma lucidumPhellinus linteusFood Chemistry,129(4), 1167-1675. http://dx.doi.org/10.1016/j.foodchem.
http://dx.doi.org/10.1016/j.foodchem... ).

3.5 Hydroxyl radical scavenging activity of AAFB polysaccharides

Among all reactive oxygen radicals, hydroxyl radical was known as the most powerful radical. It could induce severe damage to adjacent biomolecules in the body, which result in cell damage that caused ageing, cancer and several other diseases (Yang et al., 2014Yang, X., Yan, F., Huang, S., & Fu, C. (2014). Antioxidant activities of fractions from longan pericarps. Food Science and Technology, 34(2), 341-345. http://dx.doi.org/10.1590/S0101-20612014005000034.
http://dx.doi.org/10.1590/S0101-20612014... ). The removal of hydroxyl radical was probably one of the most effective ways to defense oxidative damage of human body. Therefore, hydroxyl radical scavenging activity was considered to be one of the most important antioxidant mechanisms.

The scavenging abilities of AAFB polysaccharides and BHT on hydroxyl radical are shown in Figure 5. With the increase of concentration, the scavenging abilities of AAFB polysaccharides and BHT on hydroxyl radical also increased. At the concentration range of 0.2-1.0 mg/mL, AAFB polysaccharides showed significantly stronger (p<0.05) scavenging activities than BHT. Meanwhile, IC₅₀ value of AAFB polysaccharides was 0.38 mg/mL, which was significant lower (p<0.05) than BHT (0.56 mg/mL). At an identical concentration, scavenging activity of AAFB polysaccharides on hydroxyl radical was slightly stronger than that of polysaccharides from Gloeostereum incarnatum fruit bodies (Zhang et al., 2015Zhang, Z. F., Lv, G. Y., Jiang, X., Cheng, J. H., & Fan, L. F. (2015). Extraction optimization and biological properties of a polysaccharide isolated from . Gleoestereum incarnatumCarbohydrate Polymers, 117, 185-191. http://dx.doi.org/10.1016/j.carbpol.2014.09.059. PMid:25498624.
http://dx.doi.org/10.1016/j.carbpol.2014... ). These results suggested that AAFB polysaccharides were better natural antioxidant than BHT in scavenging hydroxyl radical.

4 Conclusions

The extraction conditions of AAFB antioxidant polysaccharides were optimized by a three variable, three level Box-Behnken experiment design. Correlation analysis of the quadratic polynomial regression model indicated that the model could be employed to optimize conditions for polysaccharides extraction. The combination of liquid-solid ratio (38.77 mL/g), temperature (93.98 °C) and time (3.41 h) was determined to obtain the highest polysaccharide yield (10.46 g/100 g). The antioxidant activities of AAFB polysaccharides were evaluated by Fe²⁺-chelating ability and hydroxyl radical scavenging assay. It exhibited stronger antioxidant activity compared to BHT. Results from this study indicated that AAFB polysaccharides could be potentially used as a natural antioxidant.

Acknowledgements

This work was supported by the Doctor Research Fund of Dalian Nationalities University (No. 0701-110015).

References

Publication Dates

History