Creation of an innovative robot with a gripper for moving plant microshoots from the in vitro transport tank to the working tank with soil ground at the stage of their adaptation in soil ground during microclonal reproduction
DOI:
https://doi.org/10.15587/1729-4061.2022.253135Keywords:
robot, adaptive gripper, Kalman coefficient, microshoot overload, plant micropropagationAbstract
The industrial development of cities is the main cause of the destruction and degradation of natural resources around the world. Urbanization negatively affects the species composition of plants, the atmosphere and soil cover of areas of populated areas of large cities of the World. Tree plantations are the main mechanism for stabilizing the ecological situation in large cities and arid territories of the countries of the World.
In this regard, in order to obtain a large number of genetically identical plants using their micropropagation, it is necessary to automate the main stages of this technological process.
The result of the study is the creation of an adaptive phalanx gripper of a robotic complex for automating the technological process of handling operations. That will have a positive effect on solving the urgent problem of planting greenery in large cities and areas of arid territories not only in the Republic of Kazakhstan, but also in other countries of the World and represents a fundamentally new approach to solving the environmental problems of the Earth.
The article substantiates various options for structural-kinematic schemes of the robot gripper, taking into account the stochastic conditions of its interaction with the overloaded object. Mathematical methods have been created for the selection and justification of the geometric, structural-kinematic and dynamic parameters of grippers for overloading plant microshoots and their computer 3D models. Software has been developed for modeling the functioning of a remotely controlled physical prototype of a mobile robot with an adaptive gripper for reloading microshoots from a transport tank to a cargo tank.
Supporting Agency
- This research has been/was/is funded by the Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (Grant No. AP09562257)
References
- Kakimzhanova, A., Karimova, V., Nurtaza, A. (2017). Commercialization of the technology of microclonal propagation of tree plants for industrial use for greening in cities. Journal of Biotechnology, 256, S107. doi: https://doi.org/10.1016/j.jbiotec.2017.06.1166
- Timofeev, A. V. (1988). Adaptivnye robototekhnicheskie kompleksy. Sankt-Peterburg: Mashinostroenie, 332. Available at: http://roboticslib.ru/books/item/f00/s00/z0000018/index.shtml
- Figurin, A. V. (1988). Strukturno-parametricheskiy sintez skhvatov promyshlennyh robotov. Leningrad, 199. Available at: https://www.dissercat.com/content/strukturno-parametricheskii-sintez-skhvatov-promyshlennykh-robotov
- Ceccarelli, M. (2004). Fundamentals of Mechanics of Robotic Manipulation. Springer, 312. doi: https://doi.org/10.1007/978-1-4020-2110-7
- Ceccarelli, M., Rodriguez, N. E. N., Carbone, G. (2005). Design and tests of a three finger hand with 1-DOF articulated fingers. Robotica, 24 (2), 183–196. doi: https://doi.org/10.1017/s0263574705002018
- Rodríguez, F., Moreno, J. C., Sánchez, J. A., Berenguel, M. (2012). Grasping in Agriculture: State-of-the-Art and Main Characteristics. Mechanisms and Machine Science, 385–409. doi: https://doi.org/10.1007/978-1-4471-4664-3_15
- Zhu, W.-H., Piedboeuf, J.-C., Gonthier, Y. (2002). Emulation of a space robot using a hydraulic manipulator on ground. Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292). doi: https://doi.org/10.1109/robot.2002.1013577
- Petković, D., Pavlović, N. D. (2011). A New Principle of Adaptive Compliant Gripper. Mechanisms and Machine Science, 143–150. doi: https://doi.org/10.1007/978-94-007-2727-4_13
- Zareinia, K., Sepehri, N. (2015). A Hybrid Haptic Sensation for Teleoperation of Hydraulic Manipulators. Journal of Dynamic Systems, Measurement, and Control, 137 (9). doi: https://doi.org/10.1115/1.4030337
- Ivanov, K. S. (2013). Creation of Adaptive-Mechanical Continuously Variable Transmission. Applied Mechanics and Materials, 436, 63–70. doi: https://doi.org/10.4028/www.scientific.net/amm.436.63
- Kaiym, T. T., Gribanov, V. F., Temirbekov, E. S., Kaimov, S. T., Kaimov, Ab. T., Kaimov, A. T. et. al. (2017). The modeling of the theoretical and mathematical system and specifically the stochastic processes of the dynamical system an innovative mechanism for grasping of the robot for overloading the highly radioactive firm waste of fuel element from the secondary container into the main container. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, 2 (422), 157–174. Available at: http://rmebrk.kz/journals/3434/2454.pdf
- Temirbekov, E. S., Kaiym, T. T., Ceccarelli, M., Bostanov, B. O., Kaimov, S. T., Kaimov, A. T. (2018). Grasps of Robot Manipulator When Overloading Solid High-Radioactive Elements and Their Calculation. Advances in Italian Mechanism Science, 316–323. doi: https://doi.org/10.1007/978-3-030-03320-0_34
- Kaimov, S., Kaimov, A. T., Kaimov, A. T., Ceccarelli, M., Kaiym, T., Kaimova, G. et. al. (2018). A Gripper Mechanism to Automate Overload Process for Fuel Elements. Mechanisms and Machine Science, 118–128. doi: https://doi.org/10.1007/978-3-030-00365-4_15
- Kaimov, S., Kaimov, A. (2020). Pat. No. 35040 KZ. Auto speed transmission. No. 2020/0153.1; declareted: 04.03.2020; published: 30.04.2021. Available at: https://drive.google.com/file/d/1BLgY-qRL_yDLZ_0hqvR4y67RUQq99cT6/view?usp=sharing
- Kaimov, S., Kaimov, A. (2021). Pat. No. 6839 KZ. Adaptive robotic gripper. No. 2021/0999.2; declareted: 22.10.2021; published: 04.02.2022. Available at: https://drive.google.com/file/d/107rKdMlx3qDLO2E5eaXdf81oL8x8CtWb/view?usp=sharing
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Abylay Kaimov, Yerzhan Syrgaliyev, Amandyk Tuleshov, Suleimen Kaimov, Talgat Kaiym, Aidarkhan Kaimov, Altynay Primbetova
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
