Abstract
The thermal conductivities of epoxy composites of mixtures of graphite and graphene in varying ratios were measured. Thermal characterization results showed unexpectedly high conductivities at a certain ratio filler ratio. This phenomenon was exhibited by samples with three different overall filler concentrations (graphene + graphite) of 7, 14, and 35 wt%. The highest thermal conductivity of 42.4 ± 4.8 W/m K (nearly 250 times the thermal conductivity of pristine epoxy) was seen for a sample with 30 wt% graphite and 5 wt% graphene when characterized using the dual-mode heat flow meter technique. This significant improvement in thermal conductivity can be attributed to the lowering of overall thermal interface resistance due to small amounts of nanofillers (graphene) improving the thermal contact between the primary microfillers (graphite). The synergistic effect of this hybrid filler system is lost at higher loadings of the graphene relative to graphite. Graphite and graphene mixed in the ratio of 6:1 yielded the highest thermal conductivities at three different filler loadings.
Similar content being viewed by others
References
J. Heremans and C.P. Beetz Jr.: Thermal conductivity and thermopower of vapor-grown graphite fibers. Phys. Rev. B 32, 1981 (1985).
G.A. Slack: Anisotropic thermal conductivity of pyrolytic graphite. Phys. Rev. 127, 694 (1962).
A.A. Balandin, S. Ghosh, W. Bao, I. Calizo, D. Teweldebrahn, F. Miao, and C.N. Lau: Superior thermal conductivity of single-layer graphene. Nano Lett. 8, 902 (2008).
S. Shenogin, L. Xue, R. Ozisik, P. Keblinski, and D.G. Cahill: Role of thermal boundary resistance on the heat flow in carbon-nanotube composites. J Appl. Phys. 95, 8136 (2004).
P. Gonnet, Z. Liang, E.S. Choi, R.S. Kadambala, C. Zhang, J.S. Brooks, B. Wang, and L. Kramer: Thermal conductivity of magnetically aligned carbon nanotube buckypapers and composites. Curr. Appl. Phys. 6, 119 (2006).
S. Iijima: Helical microtubes of graphitic carbon. Nature. 354, 56 (1991).
P.M. Ajayan, O. Stephan, C. Colliex, and D. Trauth: Aligned carbon nanotube arrays formed by cutting a polymer resin—Nanotube composite. Science 265, 1212 (1994).
E.S. Choi, J.S. Brooks, D.L. Eaton, M.S. Al-Haik, M.Y. Hussaini, H. Garmestani, D. Li, and K. Dahmen: Enhancement of thermal and electrical properties of carbon nanotube polymer composites by magnetic field processing. J Appl. Phys. 94, 6034 (2003).
A. Moisala, Q. Li, I.A. Kinloch, and A.H. Windle: Thermal and electrical conductivity of single and multi-walled carbon nanotube-epoxy composites. Compos. Sci. Technol. 65, 1285 (2006).
F.H. Gojny, M.H.G. Wichmann, B. Fiedler, I.A. Kinloch, W. Bauhafer, A.H. Windle, and K. Scuttle: Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites. Polymer 47, 2036 (2006).
A. Yu, M.E. Itkis, E. Bekyarova, and R.C. Haddon: Effect of single-walled carbon nanotube purity on the thermal conductivity of carbon nanotube-based composites. Appl. Phys. Lett. 89, 133102 (2006).
J. Guo, B. Zhao, M.E. Itkis, E. Bekyarova, H. Hu, V. Karnak, A. Yu, and R.C. Haddon: Chemical engineering of the single-walled carbon nanotube-nylon 6 interface. J. Am. Chem. Soc. 128, 7492 (2006).
S. Shenogin, A. Bodapati, L. Xue, R. OIzisik, and P. Keblinski: Effect of chemical functionalization on thermal transport of carbon nanotube composites. Appl. Phys. Lett. 85, 2229 (2004).
C. Guthy, F. Du, S. Brand, K.I. Winey, and J.E. Fischer: Thermal conductivity of single-walled carbon nanotube/PMMA nanocomposites. J. Heat Transfer 129, 1096 (2007).
K. Yang, M. Gu, Y. Guo, X. Pan, and G. Mu: Effects of carbon nanotube functionalization on the the mechanical and thermal properties of epoxy composites. Carbon 47, 1723 (2009).
F. Du, C. Guthy, T. Kashiwagi, J.E. Fischer, and K.I. Winey: An infiltration method for preparing single-wall nanotube/epoxy composites with improved thermal conductivity. J. Polym. Sci., Part B: Polym. Phys. 44, 1513 (2006).
Q.M. Gong, Z. Li, X.D. Bai, D. Li, Y. Zhao, and J. Liang: Thermal properties of aligned carbon nanotube/carbon nanocomposites. Mater. Sci. Eng., A 384, 209 (2004).
H. Huang, C.H. Liu, Y. Wu, and S.S. Fan: Aligned carbon nanotube composite films for thermal management. Adv. Mater. 17, 1652 (2005).
J.G. Park, Q. Cheng, J. Lu, J. Bao, S. Li, Y. Tian, Z. Liang, C. Zhang, and B. Wang: Thermal conductivity of MWCNT/epoxy composites: The effects of length, alignment and functionalization. Carbon 50, 2083 (2012).
L.M. Veca, M.J. Meziani, W. Wang, X. Wang, F. Lu, P. Zhang, Y. Lin, R. Fee, J.W. Connell, and Y.P. Sun: Carbon nanosheets for polymeric nanocomposites with high thermal conductivity. Adv. Mater. 21, 2088 (2009).
M. Moniruzzaman and K. Winey: Polymer nanocomposites containing carbon nanotubes. Macromolecules 39, 5194 (2006).
S. Kumar, M.A. Alam, and J.Y. Murthy: Effect of percolation on thermal transport in nanotube composites. Appl. Phys. Lett. 90, 104105 (2007).
P. Keblinski and F. Cleri: Contact resistance in percolating networks. Phys. Rev. B 69, 184201 (2004).
M. Foygel, R.D. Morris, D. Anez, S. French, and V.L. Sobolev: Theoretical and computational studies of carbon nanotube composites and suspensions: Electrical and thermal conductivity. Phys. Rev. B 71, 104201 (2005).
T. Hu, A.Y. Grosberg, and B.I. Shklovskii: Conductivity of a suspension of nanowires in a weakly conducting medium. Phys. Rev. B 73, 155434 (2006).
W. Tian and R. Yang: Coaxial silicon nanowires as solar cells and nanoelectronic power sources. Appl. Phys. Lett. 90, 263105 (2007).
D. Konatham and A. Stroilo: Thermal boundary resistance at the graphene-oil interface. Appl. Phys. Lett. 95, 163105 (2009).
S.T. Huxtable, D.G. Cahill, S. Shenogin, L. Xue, R. Ozisik, P. Barone, M. Usrey, M.S. Strano, G. Siddons, M. Shim, and P. Keblinski: Interfacial heat flow in carbon nanotube suspensions. Nat. Mater. 2, 731 (2003).
X. Sun, P. Ramesh, M.E. Itkis, E. Bekyarova, and R.C. Haddon: Dependence of the thermal conductivity of two-dimensional graphite nanoplatelet-based composites on the nanoparticle size distribution. J. Phys.: Condens. Mater. 22, 334216 (2010).
C.C. Teng, C.C.M. Ma, C.H. Lu, S.Y. Yang, S.H. Lee, M.C. Hsiao, M.Y. Yen, K.C. Chiou, and T.M. Lee: Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites. Carbon 49, 5107 (2011).
A. Yu, P. Ramesh, X. Sun, E. Bekyarova, M.E. Itkis, and R.C. Haddon: Enhanced thermal conductivity in a hybrid graphite nanoplatelet-carbon nanotube filler for epoxy composites. Adv. Mater. 20, 4740 (2008).
K.M.F. Shahil and A.A. Balandin: Graphene-multilayer graphene nanocomposites as highly efficient thermal interface materials. Nano Lett. 12, 861 (2012).
K. Bui, H.M. Duong, A. Striolo, and D.V. Papavassiliou: Effective heat transfer properties of graphene sheet nanocomposites and comparison to carbon nanotube nanocomposites. J. Phys. Chem. C 115, 3872 (2011).
N.K. Mahanta and A.R. Abramson: Development of the thermal flash method for characterization of carbon nanofibers. In Proceedings of the ASME/JSME 8th Thermal Engineering Joint Conference, Honolulu, Hawaii, USA, March 2011.
N.K. Mahanta and A.R. Abramson: The thermal flash technique: The inconsequential effect of contact resistance and the characterization of carbon nanotube clusters. Rev. Sci. Instrum. 83, 054904 (2012).
N.K. Mahanta and A.R. Abramson: Thermal conductivity of graphene and graphene oxide nanoplatelets In Proceedings of the 13th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), San Diego, California, USA, May 2012.
N.K. Mahanta, A.R. Abramson, and J.Y. Howe: Thermal conductivity measurements on individual vapor-grown carbon nanofibers and graphene nanoplatelets. J Appl. Phys. 114, 163528 (2013).
N.K. Mahanta and A.R. Abramson: The dual-mode heat flow meter technique: A versatile method for characterizing thermal conductivity. Int. J. Heat Mass Transfer 53, 5581 (2010).
N.K. Mahanta, A.R. Abramson, M.L. Lake, D.J. Burton, J.C. Chang, H.K. Mayer, and J.L. Ravine: Thermal conductivity of carbon nanofiber mats. Carbon 48, 4457 (2010).
F. Deng, Q.S. Zheng, L.F. Wang, and C.W. Nan: Effects of anisotropy, aspect ratio, and nonstraightness of carbon nanotubes on thermal conductivity of carbon nanotube composites. Appl. Phys. Lett. 90, 021914 (2007).
F. Deng and Q.S. Zheng: Interaction models for effective thermal and electrical conductivities of carbon nanotube composites. Acta Mech. Solida Sin. 22, 1 (2009).
A.L. Moore, A.T. Cummins, J.M. Jensen, and L. Shi, J.H. Koo: Thermal conductivity measurements of nylon 11-carbon nanofiber nanocomposites. J. Heat Transfer 131, 091602 (2009).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mahanta, N.K., Loos, M.R., Manas Zlocozower, I. et al. Graphite–graphene hybrid filler system for high thermal conductivity of epoxy composites. Journal of Materials Research 30, 959–966 (2015). https://doi.org/10.1557/jmr.2015.68
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/jmr.2015.68