Abstract
Ball milling is a technique used extensively in metallic powders to obtain adequated properties for their applications. In this study we show that this technique is also useful for preparing organic molecular alloys. Pentaglycerin/Pentaerythritol alloys have been obtained mechanically at room temperature. Calorimetric and crystallographic characterizations establish that the mechanically obtained alloys have the same solid crystalline structure and transform to the plastic phase as the conventionally prepared alloys from the melt of the pure compounds.
Similar content being viewed by others
References
J. S. Benjamin and T. E. Volin, Met. Trans. 5, 1929 (1974).
C. C. Koch, O. B. Cavin, C. G. McKamey, and J.O. Scarbrough, Appl. Phys. Lett. 43, 1017 (1983).
R. B. Schwarz and W. L. Johnson, Phys. Rev. Lett. 51, 415 (1983).
C. C. Koch, J. Non-Cryst. Solids 117/118, 670 (1990).
L. Zaluski, P. Tessier, D. H. Ryan, C. B. Doner, A. Zaluska, J. O. Ström-Olsen, M.L Trudeau, and R. Schulz, J. Mater. Res. 8, 3059 (1993).
P. A. Zielinski, R. Schulz, S. Kaliaguine, and A. Van Neste, J. Mater. Res. 8, 2985 (1993).
M. Barrio, J. Font, J. Muntasell, J. Ll. Tamarit, N. B. Chanh, and Y. Haget, J. Chim. Phys. 87, 255 (1990).
M. Barrio, J. Font, D. O. López, J. Muntasell, J. Ll. Tamarit, N. B. Chanh, and Y. Haget, J. Chim. Phys. 87, 1835 (1990).
M. Barrio, J. Font, D. O. López, J. Muntasell, J. Ll. Tamarit, N. B. Chanh, Y. Haget, M. Teisseire, J. Guion, and X. Alcobé, J. Chim. Phys. 89, 695 (1992).
M. Barrio, J. Font, D. O. López, J. Muntasell, J. Ll. Tamarit, P. Negrier, N. B. Chanh, and Y. Haget, J. Phys. Chem. Solids 54, 171 (1993).
M. Barrio, J. Font, D. O. López, J. Muntasell, J. Ll Tamarit, and Y. Haget, J. Appl. Crystallogr. 27, 527 (1994).
J. Font and J. Muntasell, Mater. Res. Bull. XXIX, 1091 (1994).
M. Barrio, J. Font, D. O. López, J. Muntasell, and J. L. Tamarit, Sol. Energy Mater. Sol. Cells 27, 127 (1992).
J. Font, J. Muntasell, and F. Cardoner, Sol. Energy Mater. Sol. Cells 33, 169 (1994).
H. Kaasinen, Sol. Energy Mater. Sol. Cells 27, 173 (1992).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Font, J., Muntasell, J., Cesari, E. et al. Preparation of molecular alloys by the ball-milling technique. Journal of Materials Research 11, 1069–1071 (1996). https://doi.org/10.1557/JMR.1996.0134
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1996.0134