Abstract
The relationship between grinding forces and the material’s resistance to microfracture is investigated in abrasive machining of silicon nitride ceramics. Surface grinding is performed on two forms of silicon nitride with different microstructures, and the grinding forces are measured. In addition, single-point scratching is performed on polished surfaces to amplify the damage associated with the action of an individual abrasive particle in grinding. A thermal wave measurement technique is then used on the cross sections to characterize the density of subsurface microcracks associated with scratching. Compared to a fine-grain silicon nitride, the density of microcracks in a course-grain silicon nitride is significantly larger, while the grinding force is smaller. The smaller grinding force for the coarse-grain silicon nitride is attributed to the ease of local intergranular microfracture and grain dislodgement during grinding.
Similar content being viewed by others
References
H. H. K. Xu and S. Jahanmir, J. Am. Ceram. Soc. 77 (5), 1388 (1994).
H. H. K. Xu and S. Jahanmir, J. Mater. Sci. 30, 2235–2247 (1995).
H. H. K. Xu, N. P. Padture, and S. Jahanmir, J. Am. Ceram. Soc. (1995, in press).
H. H. K. Xu and S. Jahanmir, J. Am. Ceram. Soc. 78 (2), 497 (1995).
A. G. Evans and D. B. Marshall, Fundamentals of Frictions and Wear of Materials (ASM, Metals Park, OH, 1981), p. 439.
H. H. K. Xu, L. Wei, N. P. Padture, B. R. Lawn, and R. Yeckley, J. Mater. Sci. 30, 869–878 (1995).
F. Guiberteau, N. P. Padture, and B. R. Lawn, J. Am. Ceram. Soc. 77 (7), 1825 (1994).
H. H. K. Xu, L. Wei, and S. Jahanmir, J. Am. Ceram. Soc. (1995, in press).
A. C. Boccara, D. Fournier, and J. Badoz, Appl. Phys. Lett. 36, 130 (1980).
H. S. Ahn, L. Wei, and S. Jahanmir, Manufacturing Science and Engineering (PED-Vol. 68, ASME Press, New York, 1994), p. 923.
D. P. H. Hasselman, J. Composite Mater. 12, 403 (1978).
B. R. Lawn, Fracture of Brittle Solids, 2nd edition (Cambridge University Press, Cambridge, U.K., 1993).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Xu, H.H.K., Wei, L. & Jahanmir, S. Grinding force and microcrack density in abrasive machining of silicon nitride. Journal of Materials Research 10, 3204–3209 (1995). https://doi.org/10.1557/JMR.1995.3204
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1995.3204