Determination of chemical elements in magnesium-based materials by neutron activation analysis

Authors

  • Caio Almeida Justino Silva Instituto de Pesquisas Energéticas e Nucleares
  • Lilian Ninoska Muriel Braguin Instituto de Pesquisas Energéticas e Nucleares
  • Jesualdo Luiz Rossi Instituto de Pesquisas Energéticas e Nucleares
  • Isolda Costa Instituto de Pesquisas Energéticas e Nucleares
  • Mitiko Saiki Instituto de Pesquisas Energéticas e Nucleares

DOI:

https://doi.org/10.15392/bjrs.v9i1A.1584

Keywords:

biomaterials, magnesium alloys, neutron activation analysis, chemical elements, impurities.

Abstract

Over the last decades there was an increasing interest in using magnesium alloys for medical applications due to their biodegradability in the human body, providing a temporary mechanical support and corroding completely after the tissue healing. Although magnesium is a non-toxic element, it is of great importance to evaluate the element concentration, as well as the impurities present in both, pure magnesium and magnesium alloys, as the AZ31. The purpose of this study was to analyze the element composition of these materials using the method of neutron activation analysis (NAA). Standard Reference Materials (SRMs) acquired from National Institute of Standards and Technology (NIST) were analyzed for analytical quality control. Short and long term irradiations were carried out at the IEA-R1 nuclear research reactor and gamma-ray activities induced to the samples and element standard were measured using HPGe detector coupled to a Digital Spectrum Analyzer. The radioisotopes were identified by gamma ray energies and half-life. Concentrations of the elements As, Cr, Cd, Co, Fe, In, La, Mg, Mn, Mo, Na, Sb, V, W and Zn were determined in pure magnesium sample and the Al, As, La, Mg, Mn, Na, Sb and Zn in the AZ31 alloy, calculated by comparative method. The SRMs were analyzed by applying the same experimental conditions used for magnesium-based materials and their results presented good accuracy and precision. Thus, from the measurements obtained in this study it can be concluded that NAA is a suitable method for element determinations in magnesium-based materials providing reliable results.

Downloads

Download data is not yet available.

References

RATNER, B. D.; HOFFMAN, A. S.; SCHOEN, F. J; LEMONS, J. E. Biomaterials science - An introduction to materials in medicine. Elsevier, Oxford, United Kingdom (2013) in : PIRES, A.L.R.; BIERHALZ, A.C.K.; MORAES, A.M. Biomateriais: tipos, aplicações e mercado. Quím. Nova, v. 38, p. 957-971, 2015.

SEZER, N.; EVIS, Z.; KAYHAN, S. M.; TAHMASEBIFAR, A.; KOC, M. Review of magnesium-based biomaterials and their applications. J Magnes Alloy, v. 6, p. 23-43, 2018.

SAW, B. A. Corrosion resistance of magnesium alloy. ASM Handbook, 13a. Russell Township, United States, ASM International, 2003.

GU, X. N.; LO, S.S.; LI, X.M.; FAN, Y.B. Magnesium based degradable biomaterials: a review. Front Mater Sci, v. 8, p. 200-218, 2014.

JUNG, O.; SMEETS, R.; PORCHETTA, D.; KOPP, A.; PTOCK, C.; MÜLLER, U.; HEILAND, M.; SCHWADE, M.; BEHR, B.; KROEGER, N.; KLUWE, L.; HANKEN, H.; HARTJEN, P. Optimized in vitro procedure for assessing the cytocompatibility of magnesium-based biomaterials. Acta

Biomater, 2015.

DING, W. Opportunities and challenges for the biodegradable magnesium alloys as next-generation biomaterials. Regen Biomater, v. 3, p. 79-86, 2016.

TAN, L.; WANG, Q.; LIN, X.; WAN, P.; ZHANG, G.; ZHANG, Q.; YANG, K. Loss of mechanical properties in vivo and bone-implant interface strength of AZ31B magnesium alloy screws with Si-containing coating. Acta Biomater, v. 10, p. 2333-2340, 2014.

LI, X.; LIU, X.; WU, S.; YEUNG, K. W .K.; ZHENG, Y.; CHU, P. K. Design of magnesium alloys with controllable degradation for biomedical implants: from bulk to surface. Acta Biomater, v. 45, p.2-30, 2016.

PARDO, A.; MERINO, M. C.; COY, A. E.; ARRABAL, R.; VIEJO, F.; MATYKINA, E. Corrosion behavior of magnesium/aluminum alloys in 3.5% wt. NaCl. Corros Sci, v. 50, p. 823-834, 2007.

CINCU, E.; MANEA, I.; MANU, V.; BARBOS, D.; SIMA, O.; GUSTAVSSON, I.; VERMAERCKE, P.; VAJDA, N.; MOLNAR, Zs.; POLKOWSKA-MOTRENKO, H. Comparative performance of INAA and other spectroscopy techniques in the elemental analysis of stainless steel materials. J Radioanal Nucl Chem, v. 274, p. 199-205, 2007.

MANEA, I.; CINCU, E.; CRACIUN, L.; CAZAN, I.L.; MANU, V.; BARBOS, D.; COCIS A. Application of the INAA technique for elemental analysis of metallic biomaterials used in dentistry. Appl Radiat Isot, v. 67, p. 2133-2136, 2009.

SHINDE, A. D.; ACHARYA, R.; REDDY, A.V.R. Analysis of zirconium and nickel based alloys and zirconium oxides by relative and internal monostandard neutron activation analysis Methods. Nucl Eng Technol, v. 49, p. 562-568, 2017.

HAMIDATOU L. A. Overview of neutron activation analysis. IntechOpen (2019). Available at:. Last acessed:18June 2020.

EHMANN W. D. Radiochemistry and nuclear methods of analysis. Chichester, United Kingdom, John Wiley & Sons, Inc., 1999.

NIST. National Institute of Standards and Technology. Certificate of analysis. Standard reference material 363 chromium vanadium modified, p. 1-3, 2012.

NIST. National Institute of Standards and Technology Certificate of analysis. Standard reference material 1400 bone ash, p. 1-3, 1992.

NIST. National Institute of Standards and Technology. Certificate of analysis. Standard reference material 58a ferrosilicon, p. 1-4, 2009.

IAEA – International Atomic Energy Agency. Practical aspects of operating a neutron activation analysis laboratory, IAEA, TEC DOC 564. Vienne, 1990.

DE SOETE, D.; GIJBELS R.; Hoste J. Neutron activation analysis, London, United Kingdom, Wiley-Interscience, 1972.

KONIECZKA P.; NAMIESNIK J. Quality Assurance and Quality Control in the Analytical Chemical Laboratory: a practical approach, CRC Press, Florida, USA, 2009.

NAMAS. National Measurements Accreditation Service. NIS 3003. United Kingdom, 8ª Edition, 1995.

CURRIE, L. A. International recommendations offered on analytical detection and quantification concepts and nomenclature. Anal Chim Acta, v. 391, p. 127-134, 1999.

Alfa Aesar by Thermo Fisher Scientific. 44009 Magnesium Aluminum Zinc foil, https://www.alfa.com/pt/catalog/044009/&gt, (2018).

COSTA, M. Review of arsenic toxicity, speciation and polyadenylation of canonical histones. Toxicol Appl Pharm, v. 375, p 1-4, 2019.

HANSELL, C. All manner of antimony. Nat Chem, v. 7, p.8, 2015.

Downloads

Published

2021-04-30

How to Cite

Silva, C. A. J., Braguin, L. N. M., Rossi, J. L., Costa, I., & Saiki, M. (2021). Determination of chemical elements in magnesium-based materials by neutron activation analysis. Brazilian Journal of Radiation Sciences, 9(1A). https://doi.org/10.15392/bjrs.v9i1A.1584

Issue

Section

The Meeting on Nuclear Applications (ENAN) 2019

Most read articles by the same author(s)

1 2 > >>