Influence of a Hydrostatical High-Pressure on Plasticity of Solids

L. Kozak; O. Kozak

doi:10.15330/pcss.16.3.586-592

Authors

L. Kozak Ivano-Frankovsk State University of the Oil and Gas
O. Kozak Ivano-Frankivsk National Technical University of Oil and Gas

DOI:

https://doi.org/10.15330/pcss.16.3.586-592

Keywords:

high-pressure, crystal lattice, unstable, transformation, conductivity, hydrostatical, plastic deformation

Abstract

On the two-dimensional model of the crystal it was shown that the crystal lattice transform from stable to unstable under the influence of hydrostatical high pressure. As a result of such transformation is intensity the processes of plastic deformation.

It is known that all of solid bodies become plasticity and electric conductivity under the influence of a hydrostatical high-pressure. The reason of it is additional displacement of atoms of a crystal lattice. A high plasticity and electric conductivity of metals occurs due to additional displacement of atoms also. This displacement takes a place due to the specific of the interatomic interaction.

References

Mehanicheskie svojstva materialov pod vysokim davleniem. Pod redakciej H.P'ju (Mir, Moskva, 1973).

B.I. Beresnev, Plastichnost' i prochnost' tverdyh tel pri vysokih davlenijah (Nauka, Moskva, 1970).

P.V. Brіdzhmen, Fіzika visokogo tisku (ONTІ, Moskva-Lenynhrad, 1935).

G.V. Karpenko, Pro fіziko-hіmіchnu mehanіku metalіv (Naukova dumka, Kiyiv, 1973).

G.A. Malygin, Fizika tverdogo tela 10(34), 3200 (1992).

V.V. Malashenko, G.B. Peretolchina, N.Ju. Ulickaja, XX Peterburgskie chtenija po problemam prochnosti. 10-12 aprelja, 2012, Sankt-Peterburg. Sbornik materialov, chast' 2. S. 223.

http://ea.donntu.edu.ua/handle/123456789/20753.

E.Ju. Tonkov, Fazovye diagrammy jelementov pri vysokom davlenii (Nauka, Moskva, 1979).

Kozak L.Ju. Diskretnі modelі martensitnogo peretvorennja ta dvіjnikuvannja v metalah// Fіz.-hіm. mehanіka materіalіv. - 2012. - №5. - S.83-87

L.Ju. Kozak, Metallofizika i novejshie tehnologii 34(5), 1529 (2012).

P.I. Poluhin, S.S. Gorelik, V.K. Voroncov, Fizicheskie osnovy plasticheskoj deformacii (Metallurgija, Moskva, 1982).

Ja.I. Frenkel', Vvedenie v teoriju metalov (Nauka, Leningrad, 1972).

Ja.J. Dutchak ta іn., Fіzika metalіv (NMK VO, Kiyiv, 1993).

U. Pirson, Kristalohimija i fizika metalov i splavov (Mir, Moskva, 1977).

R. Kan, Fizicheskoe metalovedenie, ch.II. (Mir, Moskva, 1970).

L. Kozak, Fіziko-hіmіchna mehanіka materіalіv 1, 114 (1999).

L.Ju. Kozak, Plastichnіst' metalіv і nestіjkіst' kristalіchnoyi gratki (Fakel, Іvano-Frankіvs'k, 2004).

Ch. Kittel', Vvedenie v fiziku tverdogo tela (Nauka, Moskva, 1978).

V.A. Pavlov, Fizicheskie osnovy plasticheskoj deformacii metallov (Metalurgija, Moskva, 1982).

S.V. Smirnov, A.A. Bogatov, V.A. Kolmogorov, Issledovanie plasticheskogo razryhlenija metalla i zalechivanie deformacmonnyh defektov pri otzhige 49(2), 389 (1980).

O.G. Rybakina, Ja.S. Sidorin, Mehanika tverdogo tela. Izv. ANSSSR 1, 120 (1966).

V.A. Kolmogorov, A.A. Bogatov, B.A. Migachev, i dr., Plastichnost' i razrushenie (Metallurgija, Moskva, 1977).

L.I. Mirkin, Fizicheskie osnovy prochnosti i plastichnosti (MGU, Moskva, 1968).

R. Honikomb, Plasticheskaja deformacija metallov (Mir, Moskva, 1972).

V.G. Rizhikov, O.A. Troickij i dr., Tezisy dokladov 7 vsesojuznogo simpoziuma po mehanojemissii i mehanohimii tverdyh tel (Tashkent, 1979).S. 156.

V.V. Pustovalov, V.I. Starcev, V.S. Fonenkov, Har'kov, FTT, t.II, 1382 (1969).

G.V. Samsonov, I.F. Prjadko, L.F. Prjadko, Konfiguracionnaja model' veshhestva (Naukova dumka, Kiev, 1975).

B.I. Arharov, Ju.G. Skripka, E.S. Marhasin, FHMM, 2, 47 (1978).