Study of Chemical Bath Deposited In2S3 Thin Films

S.S. Tulenin; E.V. Maraeva; L.N. Maskaeva; V.F. Markov

doi:10.14233/ajchem.2017.20385

Issue

Vol. 29 No. 5 (2017): Vol 29 Issue 5

Issue Published : March 10, 2017

This work is licensed under a Creative Commons Attribution 4.0 International License.

Study of Chemical Bath Deposited In2S3 Thin Films

https://doi.org/10.14233/ajchem.2017.20385

S.S. Tulenin

Department of Physical and Colloid Chemistry, Ural Federal University, Yekaterinburg, Russia

E.V. Maraeva

Department of Physical and Colloid Chemistry, Ural Federal University, Yekaterinburg, Russia

L.N. Maskaeva

Department of Physical and Colloid Chemistry, Ural Federal University, Yekaterinburg, Russia

V.F. Markov

Department of Physical and Colloid Chemistry, Ural Federal University, Yekaterinburg, Russia

Corresponding Author(s) : S.S. Tulenin

stast1989@mail.ru

Asian Journal of Chemistry, Vol. 29 No. 5 (2017): Vol 29 Issue 5
Article Published : March 10, 2017

Abstract

Indum(III) sulfide (In₂S₃) thin films were grown by means of chemical bath deposition from acid solution. Calculation of ionic equilibrium with using of thermodynamic constants for systems defines boundary conditions of formation In₂S₃. Films were characterized by means of XRD, SEM, EDX and XPS methods. According to XRD, films have cubic structure of In₂S₃. XPS method shown that the surface of In₂S₃ thin film includes oxygen and carbon contained impurities. SEM confirmed nanosize nature of thin films. Optical band gap of indium(III) sulfide equal to 2.3 eV.

Keywords

Boundary conditions Chemical bath deposition Indium(III) sulfide XPS

Tulenin, S., Maraeva, E., Maskaeva, L., & Markov, V. (2017). Study of Chemical Bath Deposited In2S3 Thin Films. Asian Journal of Chemistry, 29(5), 995–998. https://doi.org/10.14233/ajchem.2017.20385

Download Citation

References

X.H. Xu, F. Wang, J.J. Liu, K.C. Park and M. Fujishige, Sol. Energy Mater. Sol. Cells, 95, 791 (2011); https://doi.org/10.1016/j.solmat.2010.10.025.
S.S. Kale, R.S. Mane, C.D. Lokhande, K.C. Nandi and S.-H. Han, Mater. Sci. Eng. B, 133, 222 (2006); https://doi.org/10.1016/j.mseb.2006.06.002.
K. Otto, A. Katerski, A. Mere, O. Volobujeva and M. Krunks, Thin Solid Films, 519, 3055 (2011); https://doi.org/10.1016/j.tsf.2010.12.027.
A.V. Novoselova, Fiziko-himicheskie svoystva poluprovodnikovih vechestv, Nauka, Moscow, p. 339 (1979).
T.T. John, C.S. Kartha, K.P. Vijayakumar, T. Abe and Y. Kashiwaba, Appl. Phys., A Mater. Sci. Process., 82, 703 (2006); https://doi.org/10.1007/s00339-005-3385-z.
Y. Xiong, Y. Xie, G. Du, X. Tian and Y. Qian, J. Solid State Chem., 166, 336 (2002); https://doi.org/10.1006/jssc.2002.9598.
S. Lugo-Loredo, Y. Peña-Méndez, M. Calixto-Rodriguez, S. Messina-Fernández, A. Alvarez-Gallegos, A. Vázquez-Dimas and T. Hernández- García, Thin Solid Films, 550, 110 (2014); https://doi.org/10.1016/j.tsf.2013.10.115.
V.P. Markov, L.N. Maskaeva and P.N. Ivanov, Gidrohimicheskoe osajdenie plenok sulfidov metallov: modelirovanie i experiment, 1nd edition, UrO RAS, Yekaterinburg, p. 276 (2006).
V.F. Markov, S.S. Tulenin, L.N. Maskaeva, M.V. Kuznetsov and N.M. Barbin, Tech. Phys. Lett., 38, 290 (2012); https://doi.org/10.1134/S1063785012030297.
B. Yahmadi, N. Kamoun, R. Bennaceur, M. Mnari, M. Dachraoui and K. Abdelkrim, Thin Solid Films, 473, 201 (2005); https://doi.org/10.1016/j.tsf.2004.04.002.
S.S. Tulenin, V.F. Markov and L.N. Maskaeva, Butlerov’s Reports, 29, 79 (2012).
C. Lokhande, A. Ennaoui, P. Patil, M. Giersig, K. Diesner, M. Muller and H. Tributsch, Thin Solid Films, 340, 18 (1999); https://doi.org/10.1016/S0040-6090(98)00980-8.
S.S. Korovin, D.V. Drobot and P.I. Fedorov, Redkie i rasseyannye elementy, Khimiya i technologiya, MISIS, Moscow, p. 461 (1999).

References

X.H. Xu, F. Wang, J.J. Liu, K.C. Park and M. Fujishige, Sol. Energy Mater. Sol. Cells, 95, 791 (2011); https://doi.org/10.1016/j.solmat.2010.10.025.

S.S. Kale, R.S. Mane, C.D. Lokhande, K.C. Nandi and S.-H. Han, Mater. Sci. Eng. B, 133, 222 (2006); https://doi.org/10.1016/j.mseb.2006.06.002.

K. Otto, A. Katerski, A. Mere, O. Volobujeva and M. Krunks, Thin Solid Films, 519, 3055 (2011); https://doi.org/10.1016/j.tsf.2010.12.027.

A.V. Novoselova, Fiziko-himicheskie svoystva poluprovodnikovih vechestv, Nauka, Moscow, p. 339 (1979).

T.T. John, C.S. Kartha, K.P. Vijayakumar, T. Abe and Y. Kashiwaba, Appl. Phys., A Mater. Sci. Process., 82, 703 (2006); https://doi.org/10.1007/s00339-005-3385-z.

Y. Xiong, Y. Xie, G. Du, X. Tian and Y. Qian, J. Solid State Chem., 166, 336 (2002); https://doi.org/10.1006/jssc.2002.9598.

S. Lugo-Loredo, Y. Peña-Méndez, M. Calixto-Rodriguez, S. Messina-Fernández, A. Alvarez-Gallegos, A. Vázquez-Dimas and T. Hernández- García, Thin Solid Films, 550, 110 (2014); https://doi.org/10.1016/j.tsf.2013.10.115.

V.P. Markov, L.N. Maskaeva and P.N. Ivanov, Gidrohimicheskoe osajdenie plenok sulfidov metallov: modelirovanie i experiment, 1nd edition, UrO RAS, Yekaterinburg, p. 276 (2006).

V.F. Markov, S.S. Tulenin, L.N. Maskaeva, M.V. Kuznetsov and N.M. Barbin, Tech. Phys. Lett., 38, 290 (2012); https://doi.org/10.1134/S1063785012030297.

B. Yahmadi, N. Kamoun, R. Bennaceur, M. Mnari, M. Dachraoui and K. Abdelkrim, Thin Solid Films, 473, 201 (2005); https://doi.org/10.1016/j.tsf.2004.04.002.

S.S. Tulenin, V.F. Markov and L.N. Maskaeva, Butlerov’s Reports, 29, 79 (2012).

C. Lokhande, A. Ennaoui, P. Patil, M. Giersig, K. Diesner, M. Muller and H. Tributsch, Thin Solid Films, 340, 18 (1999); https://doi.org/10.1016/S0040-6090(98)00980-8.

S.S. Korovin, D.V. Drobot and P.I. Fedorov, Redkie i rasseyannye elementy, Khimiya i technologiya, MISIS, Moscow, p. 461 (1999).

Issue

Vol. 29 No. 5 (2017): Vol 29 Issue 5

Study of Chemical Bath Deposited In2S3 Thin Films

Corresponding Author(s) : S.S. Tulenin

Abstract

Keywords

Full Article

Download Citation

References

Table Of Contents