Skip to main content
Advertisement
  • Loading metrics

Critical Role of Bcr1-Dependent Adhesins in C. albicans Biofilm Formation In Vitro and In Vivo

  • Clarissa J Nobile,

    Affiliations Department of Microbiology, Columbia University, New York, New York, United States of America , Biological Sciences Program, Department of Biological Sciences, Columbia University, New York, New York, United States of America

  • David R Andes,

    Affiliation Department of Medicine, Section of Infectious Diseases, University of Wisconsin, Madison, Wisconsin, United States of America

  • Jeniel E Nett,

    Affiliation Department of Medicine, Section of Infectious Diseases, University of Wisconsin, Madison, Wisconsin, United States of America

  • Frank J Smith Jr.,

    Affiliation Department of Microbiology, Columbia University, New York, New York, United States of America

  • Fu Yue,

    Affiliation Los Angeles Biomedical Research Institute at Harbor-UCLA Medical Center, Torrance, California, United States of America

  • Quynh-Trang Phan,

    Affiliation Los Angeles Biomedical Research Institute at Harbor-UCLA Medical Center, Torrance, California, United States of America

  • John E Edwards Jr.,

    Affiliations Los Angeles Biomedical Research Institute at Harbor-UCLA Medical Center, Torrance, California, United States of America , The David Geffen School of Medicine, University of California Los Angeles, Los Angeles, California, United States of America

  • Scott G Filler,

    Affiliations Los Angeles Biomedical Research Institute at Harbor-UCLA Medical Center, Torrance, California, United States of America , The David Geffen School of Medicine, University of California Los Angeles, Los Angeles, California, United States of America

  • Aaron P Mitchell

    To whom correspondence should be addressed. E-mail: apm4@columbia.edu

    Affiliation Department of Microbiology, Columbia University, New York, New York, United States of America

Abstract

The fungal pathogen Candida albicans is frequently associated with catheter-based infections because of its ability to form resilient biofilms. Prior studies have shown that the transcription factor Bcr1 governs biofilm formation in an in vitro catheter model. However, the mechanistic role of the Bcr1 pathway and its relationship to biofilm formation in vivo are unknown. Our studies of biofilm formation in vitro indicate that the surface protein Als3, a known adhesin, is a key target under Bcr1 control. We show that an als3/als3 mutant is biofilm-defective in vitro, and that ALS3 overexpression rescues the biofilm defect of the bcr1/bcr1 mutant. We extend these findings with an in vivo venous catheter model. The bcr1/bcr1 mutant is unable to populate the catheter surface, though its virulence suggests that it has no growth defect in vivo. ALS3 overexpression rescues the bcr1/bcr1 biofilm defect in vivo, thus arguing that Als3 is a pivotal Bcr1 target in this setting. Surprisingly, the als3/als3 mutant forms a biofilm in vivo, and we suggest that additional Bcr1 targets compensate for the Als3 defect in vivo. Indeed, overexpression of Bcr1 targets ALS1, ECE1, and HWP1 partially restores biofilm formation in a bcr1/bcr1 mutant background in vitro, though these genes are not required for biofilm formation in vitro. Our findings demonstrate that the Bcr1 pathway functions in vivo to promote biofilm formation, and that Als3-mediated adherence is a fundamental property under Bcr1 control. Known adhesins Als1 and Hwp1 also contribute to biofilm formation, as does the novel protein Ece1.

Synopsis

The formation of biofilms (surface-attached microbial communities) on implanted medical devices such as catheters is a major cause of fungal and bacterial infections. Prior studies of the fungal pathogen Candida albicans have shown that the regulator Bcr1 is required for biofilm formation in vitro, but the mechanism through which it promotes biofilm formation and its significance for biofilm formation in vivo was uncertain. The authors demonstrate that Bcr1 is required for biofilm formation in vivo in a rat model of catheter-based infection. Manipulation of Bcr1 target genes through mutation and gene overexpression shows that the known surface adhesin Als3 has a pivotal role in biofilm formation and that adhesins Als1 and Hwp1 also contribute to biofilm formation. The results thus indicate that adherence is the key property regulated by Bcr1 and highlight a group of adhesins as potential therapeutic targets.

Introduction

Biofilms are microbial communities that are associated with solid surfaces. Most bacteria and fungi exist predominantly in such communities in nature, and they form the basis for numerous interactions that affect human health. Cells in a biofilm display phenotypes that are distinct from their free-living counterparts, including extreme resistance to many antimicrobial agents [14]. Their health impact is reflected in the fact that implanted medical devices, such as intravascular catheters, are major risk factors for bloodstream and deep tissue infection [5, 6]. These devices serve as substrates for biofilm development; the mass and intrinsic drug resistance of the biofilm limits efficacy of host defenses and antimicrobial therapy. These biofilm-based infections are estimated to cause about 50% of all nosocomial infections [5, 7].

The fungal pathogen Candida albicans is a major cause of device-associated infections [5, 8, 9]. It produces adherent biofilms on a variety of different surfaces in vitro [3, 4, 10, 11]. Biofilm formation begins with surface adherence of yeast-form cells, which grow to yield a basal layer. Basal layer cells include some hyphae, or long tubular chains of cells, which extend to yield an upper layer that is almost exclusively hyphae. As the biofilm matures, it produces an extracellular matrix containing predominantly carbohydrate and protein [1, 12, 13].

C. albicans Bcr1, a C2H2 zinc finger protein, has a significant role in biofilm formation: bcr1/bcr1 insertion and deletion mutants form only rudimentary biofilms on silicone catheter material in vitro [14]. Bcr1 is required for expression of several cell wall protein genes, and we have proposed that Bcr1 is a positive regulator of adherence. Many Bcr1 target genes had been identified initially as hyphal-specific genes, and BCR1 RNA accumulation depends upon the hyphal developmental activator Tec1 [14]. Bcr1 is not required for hyphal morphogenesis, and we believe that it acts downstream of Tec1 to activate the acquisition of hyphal adherence properties.

Biofilms are considerably more complex in vivo than in vitro. For example, in vivo, biofilms form on intravascular catheters under conditions of vascular flow, and are exposed to and incorporate many plasma constituents. The complexity involved in forming a biofilm in vivo underscores the question of whether the same mechanisms are required for biofilm formation in vitro as in vivo. Indeed, several fungal and bacterial mutants have medium-dependent biofilm defects in vitro [15, 16]. Thus, the functions of key regulators must be appraised in vivo in order to connect questions in developmental biology to answers in antimicrobial therapy.

Recently developed animal models permit analysis of C. albicans biofilm formation in vivo. Central venous catheter infection models have been described for both rabbits [17] and rats [18]. These catheter surfaces are substrates for extensive biofilm formation, and biofilm cells on these substrates exhibit reduced antifungal susceptibility. These models further reflect the circumstances of human infection, in that the biofilm cells can lead to seeding and infection of organs [18].

In this report, we test the roles of Bcr1 target genes in biofilm formation in vitro. Our findings substantiate the proposal that Bcr1 is a regulator of adherence. We extend this analysis to an in vivo model, where our findings argue that adherence is a fundamental property under Bcr1 control that promotes biofilm formation and that the adhesin Als3 is a pivotal functional target of Bcr1 both in vitro and in vivo. Our findings highlight the complexity of in vivo biofilm formation, yet reveal a convergence of in vitro and in vivo studies to define a significant biofilm regulatory mechanism.

Results

Bcr1 Promotes Adherence In Vitro

We proposed that Bcr1 acts in the hyphal development pathway to promote adherence through stimulation of expression of several cell surface protein genes. This hypothesis predicts that overexpression of BCR1 in yeast form cells may stimulate adherence. We tested this prediction by examining the effects of BCR1 expression in a tec1/tec1 mutant (Figures 1 and 2), which is defective in producing hyphae in vitro [19]. The tec1/tec1 mutant is defective in biofilm formation [14], and the mutant cells fail to adhere to silicone catheter material (Figures 1A, 1C, and 2, Strain Set A). Introduction of a TEF1-BCR1 overexpression construct restored biofilm formation ability partially to the tec1/tec1 mutant (Figures 1F and 2, Strain Set A; p = 0.018 for the comparison of biomass determinations). Overexpression of BCR1 in the tec1/tec1 mutant does not restore hyphal formation ability (Figure 1G–1I). We believe that the partial suppression by TEF1-BCR1 reflects the failure to restore hyphal formation to the tec1/tec1 mutant. In any case, these findings support the idea that Bcr1 is a positive regulator of adherence, but not of hyphal formation.

thumbnail
Figure 1. Effect of Increased BCR1 Expression on Adherence and Hyphal Morphogenesis

Strains were grown under in vitro biofilm assay conditions for 60 h and photographed (A–F) or grown in Spider suspension cultures and examined by phase contrast microscopy at ×400 magnification (G–I). For the biofilms assays, turbid medium with all cells free-floating in the medium rather than attached to the silicone substrate indicates a biofilm-negative phenotype; clear medium with the silicone substrate completely covered with cells indicates a biofilm-positive phenotype. Relevant genotypes are given above each panel for strains CJN1015 (reference strain + TEF1) (A, G), CJN1060 (bcr1/bcr1 + TEF1) (B), CJN1052 (tec1/tec1 + TEF1) (C, H), CJN1039 (reference strain + TEF1-BCR1) (D), CJN1011 (bcr1/bcr1 + TEF1-BCR1) (E), and CJN1035 (tec1/tec1 + TEF1-BCR1) (F, I).

https://doi.org/10.1371/journal.ppat.0020063.g001

thumbnail
Figure 2. Biofilm Dry Mass Determinations

Biofilm dry mass determinations were made in quadruplicate after 60 h growth under standard biofilm conditions, as detailed in Materials and Methods. Reference strains DAY185 (shown) and CAI4-URA3 (not shown) gave similar results. Strains are grouped for convenience of comparison. Strain Set A contains CJN896 (tec1/tec1), CJN1052 (tec1/tec1 + TEF1), CJN1035 (tec1/tec1 + TEF1-BCR1), CJN1023 (tec1/tec1 + pTEC1), CJN702 (bcr1/bcr1), CJN1060 (bcr1/bcr1 + TEF1), CJN1011 (bcr1/bcr1 + TEF1-BCR1), CJN698 (bcr1/bcr1 + pBCR1), respectively. Strain Set B contains FJS2 (hyr1/hyr1), FJS6 (ece1/ece1), FJS5 (cht2/cht2), FJS8 (rbt5/rbt5), CAYC2YF1U (als1/als1), CAH7-1A1E2 (hwp1/hwp1), CAYF178U (als3/als3), CAQTP178U (als3/als3 + pALS3), respectively. Strain Set C contains CJN1153 (bcr1/bcr1 + TEF1-ALS3), CJN1144 (bcr1/bcr1 + TEF1-ALS1), CJN1288 (bcr1/bcr1 + TEF1-ECE1), CJN1222 (bcr1/bcr1 + TEF1-HWP1), CJN1281 (bcr1/bcr1 + TEF1-CHT2), CJN1259 (bcr1/bcr1 + TEF1-HYR1), CJN1276 (bcr1/bcr1 + TEF1-RBT5), respectively.

https://doi.org/10.1371/journal.ppat.0020063.g002

To understand the mechanism of Bcr1-promoted adherence, we compared expression of Bcr1-dependent genes in strains with or without the TEF1-BCR1 construct (Figure 3). The genes HYR1, HWP1, CHT2, ECE1, RBT5, ALS1, and ALS3 were expressed at much lower levels in a bcr1/bcr1 mutant than in the wild-type reference strain (Figure 3, samples 3 and 7). The presence of the TEF1-BCR1 construct restored expression of these genes and biofilm formation in the bcr1/bcr1 mutant, thus verifying the function of the construct (Figure 2; Figure 3, samples 2 and 7). The surface protein gene ECM331 was expressed at higher levels in the bcr1/bcr1 mutant than in the wild-type reference strain, and this elevated expression was also reversed by the TEF1-BCR1 construct (Figure 3, samples 2, 3, and 7). We note that TEF1-BCR1 did not substantially increase expression of Bcr1-dependent genes in the otherwise wild-type reference strain background (Figure 3, samples 5 and 3). Among the Bcr1-dependent genes, we found that HYR1, HWP1, CHT2, ECE1, and ALS3 were expressed at reduced levels in the tec1/tec1 strain compared to the reference strain (Figure 3, samples 3 and 6). Introduction of the TEF1-BCR1 construct increased expression of these genes in the tec1/tec1 strain (Figure 3, samples 4 and 6). These findings suggest that Bcr1 acts downstream of Tec1 to activate expression of target genes HYR1, HWP1, CHT2, ECE1, and ALS3. Furthermore, the augmented adherence during biofilm formation of the tec1/tec1 TEF1-BCR1 strain highlights this particular group of Bcr1-dependent genes as candidates for mediators of Bcr1-dependent adherence.

thumbnail
Figure 3. Effect of Increased BCR1 Expression on Target Gene RNA Levels

RNA prepared from mid-log phase Spider medium cultures was used to prepare Northern blots or in RT-PCR assays, as indicated. Northern blots were probed for the transcripts indicated along the left side, and PhosphorImager exposures are shown. RT-PCR assays for ALS1, ALS3, and TEF1 were conducted on serial 2-fold dilutions of cDNA preparations and fractionated on agarose gels; only the last two dilutions are shown. TEF1 transcript levels were used as an expression control. Strains included DAY185 (reference strain) (sample 1), CJN1011 (bcr1/bcr1 + TEF1-BCR1) (sample 2), CJN1015 (reference strain + TEF1) (sample 3), CJN1035 (tec1/tec1 + TEF1-BCR1) (sample 4), CJN1039 (reference strain + TEF1-BCR1) (sample 5), CJN1052 (tec1/tec1 + TEF1) (sample 6), and CJN1060 (bcr1/bcr1 + TEF1) (sample 7).

https://doi.org/10.1371/journal.ppat.0020063.g003

Key Role of Bcr1 Target Gene ALS3 in Biofilm Formation In Vitro

To test the roles of Bcr1 target genes in biofilm formation, we carried out biofilm formation assays with mutants defective in each gene. We observed no significant biofilm defect in hyr1/hyr1 (p = 0.463), ece1/ece1 (p = 0.850), cht2/cht2 (p = 0.909), or rbt5/rbt5 (p = 0.323) mutant strains versus the reference strain (Figure 2, Strain Set B; Figure 4). The als1/als1 and hwp1/hwp1 mutants also produced substantial biofilms (Figure 4), although the biofilms often sloughed off the substrate. Biofilm biomass determinations further indicated that the hwp1/hwp1 mutant has a partial biofilm defect compared to the reference strain (Figure 2, Strain Set B, p = 0.022). In contrast to the als1/als1 and hwp1/hwp1 strains, the als3/als3 mutant displayed a severe defect in biofilm formation compared to the reference strain (Figure 2, Strain Set B; Figure 4; p = 0.005), and introduction of a single wild-type ALS3 allele rescued the defect substantially (Figure 2, Strain Set B; p = 0.005). Confocal scanning laser microscopy (CSLM) imaging revealed that the als3/als3 mutant formed a rudimentary biofilm of 20 μm in depth, while the wild-type and als3/als3 + pALS3 complemented strains produced biofilms of over 200 μm in depth (Figure 5). CSLM depth images showed that the rudimentary als3/als3 mutant biofilm was comprised mainly of yeast cells, with few hyphae, whereas the biofilms of the wild-type and als3/als3 + pALS3 complemented strains included abundant hyphae (Figure 5). It should be noted that the als3/als3 mutant is not defective in hyphal formation as it forms normal hyphae when assayed under hyphal inducing conditions (Figure 5). Hyphae are also apparent among the cells in the surrounding medium of an als3/als3 mutant biofilm (unpublished data). These findings argue that Als3 has a major role in biofilm formation and suggest that reduced expression of ALS3 in the bcr1/bcr1 mutant may account for its biofilm defect.

thumbnail
Figure 4. Biofilm Formation In Vitro by Bcr1 Target Gene Mutants

Strains were grown in our standard biofilm assay and photographed after 60 h. Relevant genotypes are given above each panel and include DAY286 (reference strain), CJN459 (bcr1/bcr1), FJS2 (hyr1/hyr1), CAH7-1A1E2 (hwp1/hwp1), FJS5 (cht2/cht2), FJS6 (ece1/ece1), FJS8 (rbt5/rbt5), FJS10 (ecm331/ecm331), CAYF178U (als3/als3), and CAYC2YF1U (als1/als1). Turbid medium with all cells free-floating in the medium rather than attached to the silicone substrate indicates a biofilm-negative phenotype; clear medium with the silicone substrate completely covered with cells indicates a biofilm-positive phenotype. An uninoculated control is shown in the panel labeled “Blank.”

https://doi.org/10.1371/journal.ppat.0020063.g004

thumbnail
Figure 5. In Vitro Filamentation and Biofilm Formation by the als3/als3 Mutant

Cells were grown in free-living (planktonic) cultures in Spider medium; filamentation was examined by phase contrast microscopy at ×400 magnification (top panels). Biofilms were grown under standard conditions in Spider medium, and stained with concanavalin A conjugate for CSLM visualization. Artificially colored CSLM depth views, in which blue color represents cells closest to the silicone and red color represents cells farthest from the silicone, are shown in middle panels. For the depth views of reference strain CAI4-URA3 (ALS3/ALS3), blue = 0 μm and red = 800 μm; CAYF178U (als3/als3), blue = 0 μm, red = 80 μm; CAQTP178U (als3/als3 + pALS3), blue = 0 μm, red = 600 μm. CSLM side views are shown in lower panels. For the side views, the scale bars represent 50 μm for CAI4-URA3 (ALS3/ALS3) and CAQTP178U (als3/als3 + pALS3); and 20 μm for CAYF178U (als3/als3).

https://doi.org/10.1371/journal.ppat.0020063.g005

If reduced expression of ALS3 is the cause of the bcr1/bcr1 mutant biofilm defect, then increased expression of ALS3 in a bcr1/bcr1 mutant background should promote biofilm formation. To test this prediction, we introduced the TEF1 promoter adjacent to the native ALS3 coding region to create a TEF1-ALS3 allele, permitting Bcr1-independent ALS3 expression. RT-PCR measurement of ALS3 RNA levels confirmed that the TEF1-ALS3 allele permits expression of ALS3 in both BCR1/BCR1 and bcr1/bcr1 backgrounds (Figure 6). In the wild-type reference strain background, TEF1-ALS3 had no obvious effect on biofilm formation (Figure 6, top row). In the bcr1/bcr1 mutant background, TEF1-ALS3 improved biofilm formation substantially (Figure 2; Figure 6, top row; p = 0.002). These observations indicate that increased ALS3 expression in the bcr1/bcr1 mutant promotes significant biofilm formation ability.

thumbnail
Figure 6. Overexpression of ALS3 in the bcr1/bcr1 Mutant Restores Substantial Biofilm Formation In Vitro

Biofilms were grown under standard conditions and stained with concanavalin A conjugate for CSLM visualization. The top panels show the visual appearance. The next set of panels show depth views, in which blue color represents cells closest to the silicone and red color represents cells farthest from the silicone. The next set of panels show side views. For the depth views of reference strain DAY185 (BCR1/BCR1), blue = 0 μm and red = 600 μm; CJN1149 (BCR1/BCR1 + TEF1-ALS3), blue = 0 μm and red = 500 μm; CJN702 (bcr1/bcr1), blue = 0 μm and red = 80 μm; CJN1153 (bcr1/bcr1 + TEF1-ALS3), blue = 0 μm and red = 180 μm. For the side views, the scale bars represent 50 μm for DAY185 (BCR1/BCR1), CJN1149 (BCR1/BCR1 + TEF1-ALS3), and CJN1153 (bcr1/bcr1 + TEF1-ALS3); and 20 μm for CJN702 (bcr1/bcr1). The next set of panels show RT-PCR analysis of ALS3 expression of the indicated strains with successive 2-fold dilutions of cDNA from left to right. The bottom panels show RT-PCR of control TEF1 transcript levels.

https://doi.org/10.1371/journal.ppat.0020063.g006

We used CSLM imaging to examine the structure of biofilms that resulted from increased ALS3 expression. The TEF1-ALS3 allele did not alter biofilm structure in the otherwise wild-type background (Figure 6, CSLM depth and side views): biofilm depth was about 400 μm; little staining occurred in the basal region; and hyphal staining was prominent. The bcr1/bcr1 strain produced a thin rudimentary biofilm comprised largely of yeast form cells, as expected [14]. The bcr1/bcr1 TEF1-ALS3 strain produced a substantial biofilm that included a basal poorly stained region (Figure 6), similar in appearance to those of the wild-type strain (Figure 6) and complemented bcr1/bcr1 mutant [14]. Thus, increased ALS3 expression permits at least partial rescue of the bcr1/bcr1 mutant defect in biofilm formation.

Bcr1 Function in Biofilm Formation In Vivo

In order to determine whether Bcr1 may have a role in biofilm formation in vivo, we turned to a rat venous catheter model [18]. Implanted catheters were allowed to stabilize for 24 h and were then inoculated with wild-type, bcr1/bcr1 mutant, or bcr1/bcr1 + pBCR1 complemented strains. Biofilm formation was visualized after 12, 24, and 48 h by scanning electron microscopy of the intraluminal catheter surface (Figure 7). The wild-type and bcr1/bcr1 + pBCR1 complemented strains initiated biofilm formation by 12 h and yielded extensive adherent populations by 24 h (Figure 7A, 7B, 7G, and 7H). Both strains produced mature biofilms by 48 h that included abundant matrix material (Figure 7C and 7I), as previously reported for strain K1 [18]. In contrast, the bcr1/bcr1 mutant yielded few adherent cells at 12 and 24 h (Figure 7D and 7E), and the catheter surface was devoid of biofilm material after 48 h (Figure 7F). Despite the dramatic differences in biofilm formation ability, the three strains grew comparably in a mouse disseminated infection model; median mouse survival time was 13 d after inoculation with the wild-type strain and 10 d after inoculation with either the bcr1/bcr1 mutant or bcr1/bcr1 + pBCR1 complemented strains. Based on this evidence, Bcr1 is not required for growth in vivo under non–biofilm-forming conditions but is required for biofilm formation in vivo.

thumbnail
Figure 7. Bcr1 Requirement for Biofilm Formation In Vivo

Central venous catheters were introduced into rats, inoculated with C. albicans strain DAY185 (BCR1/BCR1) (A–C), CJN 702 (bcr1/bcr1) (D–F), or CJN698 (bcr1/bcr1 + pBCR1) (G–I) and then flushed and incubated [18]. Catheters were the removed and their contents visualized by scanning electron microscopy after 12 h (A, D, G), 24 h (B, E, H), and 48 h (C, F, I).

https://doi.org/10.1371/journal.ppat.0020063.g007

Als3 Function in Biofilm Formation In Vivo

Our observations above indicate that Als3 is a key mediator of Bcr1-dependent biofilm formation in vitro. To verify that these findings extend to in vivo biofilm formation, we compared als3/als3 mutant and als3/als3 + pALS3 complemented strains in the rat venous catheter model. Both strains formed extensive biofilms within 24 h (Figure 8A and 8B). Therefore, Als3 is not absolutely required for biofilm formation in vivo.

thumbnail
Figure 8. Role of Als3 in Biofilm Formation In Vivo

Central venous catheters were introduced into rats, inoculated with C. albicans strains CAYF178U (als3/als3) (A), CAQTP178U (als3/als3 + pALS3) (B), or CJN1153 (bcr1/bcr1 + TEF1-ALS3) (C), and then flushed and incubated for 24 h [18]. Catheters were subsequently removed and their contents visualized by scanning electron microscopy.

https://doi.org/10.1371/journal.ppat.0020063.g008

To determine whether Als3 may contribute to biofilm formation in vivo, we tested the ability of the TEF1-ALS3 expression construct to rescue the bcr1/bcr1 mutant biofilm defect. The bcr1/bcr1 TEF1-ALS3 strain produced an extensive biofilm containing both cells and matrix material (Figure 8C). This biofilm, formed after 24 h, was similar in overall appearance to that formed by the BCR1/BCR1 control strains (Figures 7B and 8B). TEF1-ALS3 expression thus rescues biofilm formation in a bcr1/bcr1 background (compare Figures 7E and 8C). These findings support the model that ALS3 is a critical Bcr1 target gene that functions in biofilm formation in vivo.

Overexpression Assays of Bcr1 Target Gene Function In Vitro

Our in vivo assays suggest that Als3 may be one of several Bcr1 targets that contribute to biofilm formation. The analysis of insertion and deletion mutant strains above pointed toward Als1 and Hwp1 as additional candidate functional targets, although their biofilm defects were mild: biofilm biomass was reduced only slightly (Figure 2), and CSLM visualization revealed no qualitative defects (unpublished data). Thus, we turned to an alternative functional analysis strategy, gene overexpression, which has recently been applied with considerable success on a genome-wide scale in Saccharomyces cerevisiae [20]. Gene overexpression is particularly useful in identifying functions among partially redundant genes, the situation that we postulate to exist here.

To determine if increased expression of Bcr1-activated target genes, other than ALS3, may rescue the biofilm defect of the bcr1/bcr1 mutant, we created genomic fusions of the TEF1 promoter to the CHT2, HYR1, RBT5, ALS1, HWP1, and ECE1 coding regions. The TEF1-ALS1, TEF1-HWP1, and TEF1-ECE1 alleles improved biofilm formation ability considerably (p < 0.004 for all comparisons to bcr1/bcr1), although not to the extent of TEF1-ALS3 (Figure 2, Strain Set C; p < 0.006 for all comparisons to bcr1/bcr1 TEF1-ALS3). These same TEF1 promoter fusion alleles did not augment biofilm formation in the BCR1/BCR1 background (unpublished data). These results indicate that Als1, Hwp1, and Ece1 may act in addition to Als3 to contribute to biofilm formation.

Discussion

We have recently taken a genetic approach to elucidate the mechanistic basis of C. albicans biofilm formation [14, 15]. A central issue is how in vitro biofilm models are related to biofilm growth in vivo and, thus, to disease. Here we have shown that the transcription factor Bcr1 is required in vivo, as it is in vitro, for biofilm formation. One key target gene under Bcr1 control is ALS3, as demonstrated by the rescue of biofilm formation through increased ALS3 expression in vitro and in vivo. These results argue that Als3-mediated adherence is a key factor in formation of biofilms in vitro and in vivo. However, absence of Als3 causes a biofilm defect only in vitro and not in vivo. One implication from this result is that Bcr1 activates additional biofilm adhesin genes. In support of this model, we find that overexpression of three additional Bcr1 target genes partially restores biofilm formation ability in vitro to a bcr1/bcr1 mutant. Our findings are summarized in Figure 9. Clearly, the interplay of in vitro and in vivo analyses holds great promise for defining biofilm regulatory mechanisms.

thumbnail
Figure 9. Role of Bcr1 Target Genes in Biofilm Formation

Bcr1 is required for full expression of adhesins Als3, Als1, and Hwp1 and of novel protein Ece1. Gene mutation and overexpression analyses together prove that Als3 is necessary and sufficient among Bcr1 targets for biofilm formation in vitro. Overexpression analysis indicates that Als1, Hwp1, and Ece1 can also restore biofilm formation in the absence of Bcr1 in vitro. The fact that overexpression suppressors Als3, Als1, and Hwp1 are all known adhesins indicates that adherence is the property through which Bcr1 governs biofilm formation. Bcr1 is required for biofilm formation in vivo, and overexpression of Als3 permits biofilm formation in the absence of Bcr1 in vivo. Thus, Bcr1-dependent adherence is critical for biofilm formation in vivo and in vitro.

https://doi.org/10.1371/journal.ppat.0020063.g009

Relationship of Bcr1 and Hyphal Gene Expression

Our studies here solidify the concept that Bcr1 relays a signal within the hyphal developmental program because an increase in BCR1 expression leads to increased expression of the hyphal-specific genes HYR1, HWP1, and ALS3 in a hyphal-defective tec1/tec1 mutant. However, we find that some Bcr1-dependent genes are expressed substantially in the tec1/tec1 strain, including RBT5, ECE1, and ALS1, despite the reduced expression of BCR1. Two simple explanations can account for this apparent paradox. One possibility is that the 4-fold reduced level of Bcr1 in the tec1/tec1 mutant is sufficient to activate a subset of target genes. These genes may have the highest-affinity Bcr1 binding sites, or their promoter regions may include binding sites for additional transcription factors that interact cooperatively with Bcr1. A second possibility is that some Bcr1 target genes are subject to a compensatory regulatory mechanism in the tec1/tec1 background. The latter explanation seems particularly plausible for RBT5, which responds to numerous genetic and environmental regulatory signals [2123]. Identification of the Bcr1 binding site will help to distinguish between these explanations.

One unexpected observation is that CHT2 expression is both Bcr1 and Tec1 dependent. CHT2, which specifies a cell wall chitinase homolog, is expressed at higher levels in yeast cells than hyphal cells under many growth conditions [24, 25]. However, CHT2 is not exclusively a yeast phase-specific gene. For example, it was found to be coregulated with numerous hyphal-specific genes in a study of pH-regulated gene expression [26], and the CHT2 transcript has been detected previously in cells induced to form hyphae in Spider medium or serum [21]. Our results indicate that Bcr1 and Tec1 target genes are not restricted to hyphal-specific genes.

Control of Adherence by Bcr1 during Biofilm Formation In Vitro

The proposal that Bcr1 is a positive regulator of biofilm adherence stems from two prior observations. First, Bcr1 is required for biofilm formation, a process that depends upon both cell-cell and cell-substrate adherence. Second, numerous Bcr1-dependent genes encode proteins that contribute to cell wall or cell surface structure. The in vitro studies reported here include three lines of evidence in support of this proposal. First, expression of Bcr1 in a tec1/tec1 mutant promotes substantial adherence to a silicone substrate. Second, a deletion of one Bcr1-dependent adhesin gene, ALS3, causes a biofilm formation defect similar to that of the bcr1/bcr1 mutant. Third, the bcr1/bcr1 biofilm formation defect is fully rescued through increased expression of Als3 and partially rescued through increased expression of two other known adhesins, Als1 and Hwp1. Our results thus indicate that the adhesin expression defect is a major cause of the bcr1/bcr1 mutant biofilm formation defect.

The tec1/tec1 mutant has a severe biofilm defect: it grows under our in vitro cultivation conditions as a suspension of yeast cells. Introduction of TEF1-BCR1 alters that mutant phenotype by promoting growth primarily on the surface of the silicone substrate. The biofilm so formed is unstable in that it disperses into clumps of cells during manipulation, and its biomass is 3-fold less than that of the wild-type and complemented mutant strains. Thus, expression of Bcr1 is not sufficient to promote extensive biofilm formation by yeast cells. However, increased adherence of the tec1/tec1 TEF1-BCR1 strain, compared to a tec1/tec1 strain, is readily apparent, thus connecting Bcr1 function to adherence.

The finding that the Bcr1-dependent adhesin Als3 is required for biofilm formation strengthens this connection. Als3 belongs to a large C. albicans protein family with structural features similar to those of the α mating agglutinin of S. cerevisiae [27, 28]. Direct assays have demonstrated roles for C. albicans Als1, Als3, Als5, and Als6 in adherence to diverse substrates [29], and mutational analysis indicates that Als2 and Als4 are also adhesins [30]. The two Bcr1-dependent family members, Als1 and Als3, have highly related sequences throughout their N-terminal domains, the region implicated in substrate binding. This close relationship is reflected by their similar substrate binding properties [29]. Our studies here also support a close functional relationship between Als1 and Als3, because overexpression of either adhesin in a bcr1/bcr1 background restores biofilm formation to a measurable extent. There are some functional distinctions between Als1 and Als3, because Als3 is required for biofilm formation under our in vitro assay conditions, while Als1 is not. Similarly, TEF1-ALS3 is more efficient than TEF1-ALS1 in suppression of the bcr1/bcr1 biofilm defect. Nonetheless, the clear connection between Bcr1, Als1, and Als3 argues that a major functional role of Bcr1 is to promote adherence.

One unexpected conclusion from our findings is that Hwp1 contributes to biofilm formation in vitro. Hwp1 is a well-characterized hyphal adhesin that serves as a substrate for mammalian transglutaminases, thus mediating covalent attachment of C. albicans to host cells [28, 31]. It has not previously been shown to mediate interactions between C. albicans cells, and the transglutaminases that modify Hwp1 are of mammalian origin [31]. Our observations suggest that Hwp1 can mediate C. albicans cell-cell interactions, and that it does so in the absence of transglutaminase activity. An interesting implication is that Hwp1 may contribute to adherence between mating partners, thus explaining its up-regulation by mating factor [32, 33].

Our findings also implicate Ece1 in adhesion, thus providing the first functional insight into this protein. ECE1 was discovered as a hyphal-induced gene and was among the first C. albicans genes disrupted with the Ura-blaster method [34, 35]. However, the ece1/ece1 mutant has no apparent phenotypic defect [35]. The idea that Ece1 functions in adhesion is suggested by our observation that its overexpression restores biofilm formation to a bcr1/bcr1 mutant. ECE1, like HWP1, is induced by mating pheromone [33], another possible connection between Ece1 and adherence. Ece1 does not resemble an adhesin: it is comprised of novel 34-residue repeats that surround a possible transmembrane domain [35]. Although its mechanism of action is uncertain, an interesting possibility is that Ece1 promotes surface exposure of adhesins.

Genetic Control of Biofilm Formation In Vivo

Biofilm formation in vivo is considerably more complex than in vitro and involves dynamic interactions with many host proteins, cells, and environmental factors. These differences raise the question of whether the major genetic factors operative in vitro play a commensurate role in vivo. We have addressed this issue for two gene products: Bcr1 and Als3. Although the experimental outcomes were different in detail, they argue that both proteins have significant roles in vivo.

The significance of Bcr1 is clearest: it is required in vivo for biofilm formation but not for growth. The fact that the mutant leaves catheter surfaces essentially clear of material suggests that there is a defect in early events of biofilm formation in vivo, much as observed in vitro. The defects under the two circumstances, however, are slightly different: a thin layer of bcr1/bcr1 mutant cells is associated with the substrate transiently in vivo but stably in vitro. It is possible that the few substrate-bound cells that appear early in vivo may be destroyed later by host defenses. An alternative possibility is that larger cell masses are dislodged efficiently by blood flow if their adherence is compromised by the bcr1 defect. In either case, it is clear that Bcr1 governs a mechanism that contributes to biofilm formation in vivo.

The potency of TEF1-ALS3 as a suppressor of the bcr1/bcr1 defect argues that Als3 also has a critical role in biofilm formation in vivo. How can that observation be reconciled with the fact that an als3/als3 null mutant has no biofilm defect in vivo? One simple model is that additional adhesins can partially compensate for the absence of Als3 in vivo but not in vitro. Our overexpression studies implicate Als1 and Hwp1 as candidate compensatory adhesins, in keeping with this model. The distinction between the in vivo and in vitro situations may reflect a higher level of expression of the compensatory adhesins in vivo than in vitro. A second possibility is that host constituents, for example serum components, may contribute to adherence. Thus, the same low level of surface adhesin activity may support biofilm formation in vivo but not in vitro.

The restoration of biofilm formation through ALS3 overexpression in the bcr1/bcr1 mutant both in vitro and in vivo indicates that Bcr1 governs one main function relevant for biofilm formation: adherence. Although transcription factor mutants are useful for definition of functionally related genes, the mechanistic basis for their phenotypic defects can be complex because of the extent of their gene expression defects. Moreover, functional overlap among targets can obscure loss-of-function target gene mutant phenotypes. Our results here illustrate the utility of gene overexpression for identification of critical target genes that govern a complex process.

Materials and Methods

Media.

C. albicans strains were grown at 30 °C in either YPD (2% Bacto Peptone, 2% dextrose,1% yeast extract) for Ura+ strains or in YPD+uri (2% Bacto Peptone, 2% dextrose,1% yeast extract, and 80 μg/ml uridine) for Ura− strains. C. albicans transformants were selected for on synthetic medium (2% dextrose, 6.7% YNB with ammonium sulfate, and auxotrophic supplements) or on YPD+clonNAT (2% Bacto Peptone, 2% dextrose,1% yeast extract, and 400 μg/ml clonNAT [WERNER BioAgents, Jena, Germany]) for Nat+ strains. For biofilm growth, strains were grown at 37 °C in Spider medium [36]. Assays for hyphal induction of the tec1/tec1 mutant (+ vector) (CJN1052), the tec1/tec1 mutant overexpressing BCR1 (CJN1035), the reference strain (+ vector) (CJN1015), the reference strain (DAY185), the als3/als3 mutant (CAYF178U), and the als3/als3 +pALS3 complemented strain (CAQTP178U) were also done at 37 °C in Spider medium.

Plasmid and C. albicans strain construction.

All strains used in this study are listed in Table 1. All strains are derived from BWP17 (ura3Δ::λimm434/ura3Δ::λimm434 arg4::hisG/arg4::hisG his1::hisG/his1::hisG) [37] except for the following CAI4 derivatives [34]: CAI4-URA3 [38], CAYC2YF1U, the als1/als1 mutant strain [39], and CAH7-1A1E2 [28], the hwp1/hwp1 mutant strain. Construction of the bcr1/bcr1 insertion mutant strain, CJN459; the tec1/tec1 insertion mutant strain, CJN308; the bcr1/bcr1 deletion mutant strain, CJN702, and its complemented strain, CJN698, was described previously [14].

For construction of the insertion mutant strains for Bcr1 target genes, we took advantage of a Tn7-UAU1 plasmid insertion mutant library containing our genes of interest, made by The Institute for Genome Research (TIGR). Each TIGR plasmid containing the orf::Tn7-UAU1 segment for orf19.4975 (HYR1), orf19.3895 (CHT2), orf19.3374 (ECE1), orf19.5636 (RBT5), and orf19.4255 (ECM331) was released by NotI digestion and then transformed into strain BWP17 using standard C. albicans transformation protocols described previously [40], except that C. albicans cells were heat shocked at 44 °C for 20 min, which increased efficiency, instead of the standard 42 °C for 1 h. The Arg+ heterozygous transformants were then used to obtain Arg+ Ura+ homozygous insertion mutant strains FJS2 (hyr1/hyr1), FJS5 (cht2/cht2), FJS6 (ece1/ece1), FJS8 (rbt5/rbt5), and FJS10 (ecm331/ecm331) using methods described previously [40]. These homozygous insertion mutants were then screened by colony PCR to ensure absence of the wild-type allele. We used strain DAY286 (Arg+ Ura+ His−) [40] as a reference strain for these mutants.

For construction of the TEF1-BCR1 overexpression plasmid pCJN491, PCR was done using primers OE723-ATG (5′-ATGTCAGGGACATCACAAGTACTTCA-3′) and OE723-908 (5′-AATAATAGTTTCCCAATTGAAAAAAGAGAGGAC-3′) to generate a 2,723-bp fragment beginning from the ATG of the BCR1 ORF (orf19.8342) to 500 bp downstream of the stop codon. This fragment was inserted into the pGEMT-Easy vector (Promega, Madison, Wisconsin, United States) and then digested with EcoRI and SpeI (releasing a 1,650-bp fragment containing the larger portion of the BCR1 ORF including the start codon and 1,650 bp downstream of the start codon), and cloned into an EcoRI- and SpeI-linearized vector pTEF1 [15], to yield plasmid pCJN491 in the correct orientation. pTEF1 [15] is a vector that harbors the constitutively active TEF1 promoter that is derived from pDDB78, a HIS1 vector [41]. A unique SbfI site lying within the 1,650-bp portion of BCR1 was used to direct integration of the plasmid to the natural BCR1 locus via SbfI digestion. The TEF1-BCR1 overexpression C. albicans strains CJN1011, CJN1035, and CJN1039 were constructed by transforming CJN459 (a His− bcr1/bcr1 insertion mutant), CJN308 (a His− tec1/tec1 insertion mutant), and DAY286 (a His− reference strain), respectively, with SbfI-linearized pCJN491 to generate His+ strains overexpressing BCR1. The TEF1 vector alone C. albicans strains CJN1060, CJN1052, and CJN1015 were constructed by transforming CJN459, CJN308, and DAY286, respectively, with NruI-linearized pTEF1 to generate His+ strains with the vector alone.

The NAT1-TEF1 overexpression plasmid pCJN498 was generated as follows. PCR was done using primers AgNat1F (5′-ATCAAGCTTGCCTCGTCC-3′) and AgNat1R (5′-GCGTTAGTATCGAATCGACAG-3′) with the template plasmid pJK799 [42] to generate a 1,220-bp fragment amplifying the Ashbya gossypii TEF1 promoter next to the C. albicans NAT1 ORF and followed by the A. gossypii TEF1 terminator. The use of A. gossypii sequences instead of C. albicans sequences in pJK799 surrounding the NAT1 ORF prevents misintegration of the construct [42]. This fragment was inserted into the pGEMT-Easy vector (Promega) in the correct orientation to create plasmid pCJN495. PCR was done using primers TEF1-SpeIF (5′-AAACTAGTGCATCTAAACATCAATTGAC-3′) and TEF1-Nde1R (5′-GATTGATCATATGTATATAAAATGTATACTTAG-3′) to generate an 800-bp product containing the C. albicans TEF1 promoter with added NdeI and SpeI restriction sites upstream and downstream of the promoter, respectively. This PCR fragment was digested with NdeI and SpeI and ligated into NdeI- and SpeI-digested plasmid pCJN495 to create pCJN498 containing the A. gossypii TEF1 promoter next to the C. albicans NAT1 ORF, followed by the A. gossypii TEF1 terminator, followed by the C. albicans TEF1 promoter in the correct orientation.

The TEF1-ALS3 overexpression C. albicans strains CJN1149 and CJN1153 were constructed by transforming DAY185 (a His+ reference strain) [43] and CJN702 (a His+ bcr1/bcr1 deletion mutant), respectively, using PCR products from template plasmid pCJN498 and primers ALS3-F-OE-Ag-NAT-Ag-TEF1p (5′-AGCCAAACAATCCGAAGCAACGTAAAGTACGATATCAAAGAATCATAACTTTGCTTTCTATTTGATAACCCGCCTCAAATCAAGATTGGGAGGTTAACAATCAAGCTTGCCTCGTCCCC-3′) and ALS3-R-OE-Ag-NAT-Ag-TEF1p (5′-TAGACCAAGTCAATGAATTAAAACTGTTGAAAACACCAGTGATTGTCTTTGCAGTCGCAACCGACAAATATATGAGTAACAATGTATATTGTTGTAGCATTATAAAATGTATACTTAGAA-3′). These primers amplify the entire A. gossypii TEF1 promoter, the C. albicans NAT1 ORF, the A. gossypii TEF1 terminator, and the C. albicans TEF1 promoter with 100 bp of hanging homology to 500 bp upstream into the promoter of ALS3 for the forward primer and 100 bp of hanging homology from exactly the start codon of the ALS3 ORF. The homology in these primers allows for homologous recombination of the entire cassette directly upstream of the ALS3 natural locus so that ALS3 can be overexpressed with the TEF1 promoter instead of its natural promoter. The transformation into C. albicans strains was done as described above except an additional 5-h recovery step in YPD at 30 °C was done after the cells were heat shocked at 44 °C for 20 min in order to allow for NAT1 expression. The cells were then plated onto YPD + 400 μg/ml clonNat plates for 2 d at 30 °C to select for Nat+ transformants, and transformants were checked by colony PCR. We used strain DAY185 (Arg+ Ura+ His+) [43] as a reference strain for these strains.

The als3Δ/als3Δ mutant, CAYF178U, was constructed from strain BWP17. The two alleles of ALS3 were serially disrupted using the markers HIS1 and ARG4. The disruption cassettes were amplified with the following primers: ALS3-5DR (5′-CCTCATTACACCAACCATACAACTTTGTGGTCTACAACTTGGGTTATTGAAACAAAAACAGTTTTCCCAGTCACGACGTT-3′) and ALS3-3DR (5′-GGTTGATTCAGCAGTAGTAGTAACAGTAGTAGTTTCATCAGCACTAGAAGAAATGATAGGTGTGGAATTGTGAGCGGATA-3′). The disruption of ALS3 was verified by PCR using the following primers: 3Confirm-1 (5′-ATGACACCATGTCAAGTTCAGA-3′) and 3Confirm-2 (5′-GTTGGTTGTTCAATGACACTGG-3′). To complement the als3Δ/als3Δ mutant with a wild-type copy of ALS3, a full–length version of ALS3 was digested from pGEMT with PvuI and SphI [29], and then subcloned into pDS10 at the SphI site [44]. The construct was linearized with Bsp1407I and integrated into the ALS3 locus of the als3Δ/als3Δ Ura− strain, selecting Ura+. Excision of the URA3-dpl200 marker was then selected by plating on 5-FOA medium. ALS3 complementation was confirmed by PCR using primers 5′-TGAAGCAGCCTTTAGTGGCCT-3′ and 5′-AGAAGTGGAAGCAGCTGTGGA-3′.

URA3 and the adjacent IRO1 locus was restored in the als1Δ/als1Δ strain [39], als3Δ/als3Δ, and als3Δ/als3Δ::ALS3 strains as follows. Ura− derivatives of these mutants were selected by plating on synthetic media containing 5-FOA and uridine. A 3.9-kb URA3-IRO1 fragment was released from pBSK-URA3 by NotI/PstI digestion and used to transform the Ura− strains [44]. The restoration of URA3 to its native locus was confirmed by PCR using the primers 5′-TGCTGGTTGGAAT GCTTATTTG-3′ and 5′-TGCAAATTCTGCTACTGGAGTT-3′.

In vitro biofilm growth conditions.

For in vitro biofilm growth assays, strains were grown in YPD overnight at 30 °C, diluted to an OD600 = 0.5 in 2 ml of Spider medium (with auxotrophic supplements), and added to a sterile 12-well plate with a prepared silicone square (1.5 × 1.5 cm cut from Cardiovascular Instrument silicone sheets [Wakefiled, Massachusetts, United States]). The silicone square was previously treated with bovine serum (B-9433; Sigma, St. Louis, Missouri, United States) overnight and washed with PBS in order to prepare it for the biofilm assay. The inoculated plate was incubated at 37 °C for 90 min at 150 rpm agitation for initial adhesion of cells. To remove unadhered cells, the squares were washed with 2 ml of PBS, and the squares were moved to a fresh 12-well plate containing 2 ml of fresh Spider medium. This plate was incubated at 37 °C for an additional 60 h at 150-rpm agitation to allow for biofilm formation.

Microscopic visualization of in vitro biofilms.

For the in vitro experiments, biofilms were observed visually and by CSLM. For in vitro CSLM imaging, biofilms were stained with 25 μg/ml concanavalin A Alexa Fluor 594 conjugate (C-11253; Molecular Probes, Eugene, Oregon, United States) for 1 h in the dark at 37 °C with 150 rpm agitation. CSLM was performed with an upright Zeiss Axioskop2 FS MOT LSM 510 multiphoton microscope using a Zeiss Achroplan ×40/0.8W objective. In order to visualize concanavalin A conjugate staining, a HeNe1 laser with 543-nm excitation wavelength was used. All in vitro CSLM images were assembled into side and depth views using the Zeiss LSM Image Browser (version 3.2.0.115) software. For all side views, the silicone is located at the top of the image. Depth views are artificially colored images indicating cell depth using a color gradient, where blue represents cells closest to and red represents cells farthest from the silicone substrate.

RNA isolation and expression analysis.

Overnight cultures were inoculated in 5 ml of YPD at 30 °C. The next day, 100 ml of Spider medium was inoculated with the YPD overnight culture to obtain an OD600 = 0.05, and was grown at 37 °C for 12 h (OD600 = ≈8). Cells were immediately harvested by vacuum filtration. RNA extraction and Northern analysis were performed as previously described [40]. For RT-PCR analysis for detection of ALS1 and ALS3, 10 μg of total RNA was DNase treated at 37 °C for 1 h, ethanol precipitated, and resuspended in 100 μl of DEPC water. cDNA was synthesized and RT-PCR was done as previously described for ALS1 and ALS3 [45] with reverse transcriptase and without reverse transcriptase (as a control).

In vivo biofilm model.

A rat central venous catheter infection model [18] was selected for in vivo biofilm studies. The catheter diameter was chosen in an attempt to permit blood flow around the extraluminal catheter surface. To mimic material used in patients, polyethylene tubing (inner diameter −0.76 mm, outer diameter 1.52 mm) was chosen. Specific-pathogen-free Sprague-Dawley rats weighing 400 g were used (Harlan Sprague-Dawley, Indianapolis, Indiana, United States). A heparinized (100 U/ml) catheter was surgically inserted into the external jugular vein and advanced to a site above the right atrium (2 cm length). The catheter was secured to the vein and the proximal end tunneled subcutaneously to the midscapular space and externalized through the skin. The catheters were placed 24 h prior to infection to allow a conditioning period for deposition of host protein on the catheter surface. Infection was achieved by intraluminal instillation of 500 μl of C. albicans cells (106 cells/ml). After a dwelling period of 4 h, the catheter volume was withdrawn and the catheter was flushed with heparinized 0.15 M NaCl.

Catheters from two animals were removed at three time points (12, 24, and 48 h) after C. albicans infection to determine biofilm development on the internal surface of the intravascular devices. The distal 2 cm of the catheter was cut from the entire catheter length, and biofilms were imaged using both CSLM and scanning electron microscopy. Scanning electron microscopy was used for architectural investigation of the biofilm process. Catheter segments were washed with 0.1 M phosphate buffer (pH 7.2) and placed in fixative (1% glutaraldehyde and 4% formaldehyde). The samples were then washed with buffer for 5 min and placed in 1% osmium tetroxide for 30 min. The samples were then dehydrated in a series of 10-min ethanol washes (30%, 50%, 70%, 85%, 95%, and 100%). Final desiccation was accomplished by critical point drying (Tousimis, Rockville, Maryland, United States). Specimens were mounted on aluminum stubs and sputter-coated with gold. Samples were imaged in a scanning electron microscope (Hitachi S-5700 or JEOL JSM-6100) in the high-vacuum mode at 10 kV. The images were processed for display using Adobe Photoshop 7.0.1.

Disseminated murine candidiasis models.

Groups of ten 20-g male Balb/C mice were inoculated via the lateral tail vein with 5 × 105 blastospores with each strain of C. albicans. The mice were monitored three times daily for survival.

Biofilm dry mass measurements.

For dry mass measurements, each silicone square was weighed prior to inoculation with the strain of interest. Biofilms were grown for 60 h on the silicone square (as described above). The silicone squares containing their respective biofilms were then removed from the wells, dried overnight in a fume hood, and weighed the following day. Total biomass of each biofilm was calculated by subtracting the weight of the silicone prior to biofilm growth from the weight of the silicone after biofilm growth. The average total biomass for each strain was calculated from four independent samples after subtracting the mass of a blank silicone square with no cells added. Statistical significance (p-values) was calculated with the Student's two-tailed t-test function in Microsoft Excel.

Supporting Information

Figure S1. Mouse Survival Data

Disseminated murine candidiasis assays. Groups of ten 20-g male Balb/C mice were inoculated via the lateral tail vein with 5 × 105 blastospores with each strain of C. albicans. The mice were monitored three times daily for survival.

https://doi.org/10.1371/journal.ppat.0020063.sg001

(44 KB PDF)

Accession Numbers

Information for the following C. albicans genes can be found at the Candida Genome Database (CGD) Web site (http://www.candidagenome.org): BCR1 (orf19.723), TEC1 (orf19.5908), HWP1 (orf19.1321), ALS3 (orf19.1816), ALS1 (orf19.5741), HYR1 (orf19.4975), CHT2 (orf19.3895), ECE1 (orf19.3374), RBT5 (orf19.5636), and ECM331 (orf19.4255).

Acknowledgments

We are grateful for the online availability of the Candida genome database (CGD) and the CandidaDB Web Server. We thank all members of the Mitchell laboratory for insightful discussions and comments on this manuscript. We also acknowledge our manuscript reviewers, who suggested that we broaden our gene overexpression analysis. We are grateful to Allison Fay for her help in constructing plasmid pCJN498, Paula Sundstrom for generously providing us with her hwp1/hwp1 mutant strain, Julia Kohler for sharing her plasmid pJK799, and Bill Nierman and his colleagues at The Institute for Genome Research (TIGR) for constructing a plasmid insertion mutant library from which several C. albicans insertion mutants were made. We are indebted to Theresa Swayne, Sudhindra Swamy, and Sharmilee Ramcharan for CSLM advice.

Author Contributions

CJN, DRA, JEN, SGF, and APM conceived and designed the experiments. CJN, DRA, JEN, and QTP performed the experiments. CJN, DRA, JEN, JEE, SGF, and APM analyzed the data. FJS, FY, QTP, JEE, and SGF contributed reagents/materials/analysis tools. CJN, DRA, JEE, SGF, and APM wrote the paper.

References

  1. 1. Douglas LJ (2003) Candida biofilms and their role in infection. Trends Microbiol 11: 30–36.
  2. 2. Fux CA, Costerton JW, Stewart PS, Stoodley P (2005) Survival strategies of infectious biofilms. Trends Microbiol 13: 34–40.
  3. 3. Kumamoto CA (2002) Candida biofilms. Curr Opin Microbiol 5: 608–611.
  4. 4. Ramage G, Saville SP, Thomas DP, Lopez-Ribot JL (2005) Candida biofilms: An update. Eukaryot Cell 4: 633–638.
  5. 5. Kojic EM, Darouiche RO (2004) Candida infections of medical devices. Clin Microbiol Rev 17: 255–267.
  6. 6. von Eiff C, Jansen B, Kohnen W, Becker K (2005) Infections associated with medical devices: Pathogenesis, management and prophylaxis. Drugs 65: 179–214.
  7. 7. Bertagnolio S, de Gaetano Donati K, Tacconelli E, Scoppettuolo G, Posteraro B, et al. (2004) Hospital-acquired candidemia in HIV-infected patients. Incidence, risk factors and predictors of outcome. J Chemother 16: 172–178.
  8. 8. Beck-Sague C, Jarvis WR (1993) Secular trends in the epidemiology of nosocomial fungal infections in the United States, 1980–1990. National Nosocomial Infections Surveillance System. J Infect Dis 167: 1247–1251.
  9. 9. Maki DG, Tambyah PA (2001) Engineering out the risk for infection with urinary catheters. Emerg Infect Dis 7: 342–347.
  10. 10. Chandra J, Patel JD, Li J, Zhou G, Mukherjee PK, et al. (2005) Modification of surface properties of biomaterials influences the ability of Candida albicans to form biofilms. Appl Environ Microbiol 71: 8795–8801.
  11. 11. Kuhn DM, Chandra J, Mukherjee PK, Ghannoum MA (2002) Comparison of biofilms formed by Candida albicans and Candida parapsilosis on bioprosthetic surfaces. Infect Immun 70: 878–888.
  12. 12. Baillie GS, Douglas LJ (2000) Matrix polymers of Candida biofilms and their possible role in biofilm resistance to antifungal agents. J Antimicrob Chemother 46: 397–403.
  13. 13. Chandra J, Kuhn DM, Mukherjee PK, Hoyer LL, McCormick T, et al. (2001) Biofilm formation by the fungal pathogen Candida albicans: Development, architecture, and drug resistance. J Bacteriol 183: 5385–5394.
  14. 14. Nobile CJ, Mitchell AP (2005) Regulation of cell-surface genes and biofilm formation by the C. albicans transcription factor Bcr1p. Curr Biol 15: 1150–1155.
  15. 15. Richard ML, Nobile CJ, Bruno VM, Mitchell AP (2005) Candida albicans biofilm-defective mutants. Eukaryot Cell 4: 1493–1502.
  16. 16. Chagneau C, Saier MH Jr (2004) Biofilm-defective mutants of Bacillus subtilis. J Mol Microbiol Biotechnol 8: 177–188.
  17. 17. Schinabeck MK, Long LA, Hossain MA, Chandra J, Mukherjee PK, et al. (2004) Rabbit model of Candida albicans biofilm infection: Liposomal amphotericin B antifungal lock therapy. Antimicrob Agents Chemother 48: 1727–1732.
  18. 18. Andes D, Nett J, Oschel P, Albrecht R, Marchillo K, et al. (2004) Development and characterization of an in vivo central venous catheter Candida albicans biofilm model. Infect Immun 72: 6023–6031.
  19. 19. Schweizer A, Rupp S, Taylor BN, Rollinghoff M, Schroppel K (2000) The TEA/ATTS transcription factor CaTec1p regulates hyphal development and virulence in Candida albicans. Mol Microbiol 38: 435–445.
  20. 20. Sopko R, Huang D, Preston N, Chua G, Papp B, et al. (2006) Mapping pathways and phenotypes by systematic gene overexpression. Mol Cell 21: 319–330.
  21. 21. Braun BR, Johnson AD (2000) TUP1, CPH1 and EFG1 make independent contributions to filamentation in Candida albicans. Genetics 155: 57–67.
  22. 22. Liu TT, Lee RE, Barker KS, Lee RE, Wei L, et al. (2005) Genome-wide expression profiling of the response to azole, polyene, echinocandin, and pyrimidine antifungal agents in Candida albicans. Antimicrob Agents Chemother 49: 2226–2236.
  23. 23. Weissman Z, Kornitzer D (2004) A family of Candida cell surface haem-binding proteins involved in haemin and haemoglobin-iron utilization. Mol Microbiol 53: 1209–1220.
  24. 24. McCreath KJ, Specht CA, Robbins PW (1995) Molecular cloning and characterization of chitinase genes from Candida albicans. Proc Natl Acad Sci U S A 92: 2544–2548.
  25. 25. Cao YY, Cao YB, Xu Z, Ying K, Li Y, et al. (2005) cDNA microarray analysis of differential gene expression in Candida albicans biofilm exposed to farnesol. Antimicrob Agents Chemother 49: 584–589.
  26. 26. Bensen ES, Martin SJ, Li M, Berman J, Davis DA (2004) Transcriptional profiling in Candida albicans reveals new adaptive responses to extracellular pH and functions for Rim101p. Mol Microbiol 54: 1335–1351.
  27. 27. Hoyer LL (2001) The ALS gene family of Candida albicans. Trends Microbiol 9: 176–180.
  28. 28. Sundstrom P (2002) Adhesion in Candida spp. Cell Microbiol 4: 461–469.
  29. 29. Sheppard DC, Yeaman MR, Welch WH, Phan QT, Fu Y, et al. (2004) Functional and structural diversity in the Als protein family of Candida albicans. J Biol Chem 279: 30480–30489.
  30. 30. Zhao X, Oh SH, Yeater KM, Hoyer LL (2005) Analysis of the Candida albicans Als2p and Als4p adhesins suggests the potential for compensatory function within the Als family. Microbiology 151: 1619–1630.
  31. 31. Staab JF, Bradway SD, Fidel PL, Sundstrom P (1999) Adhesive and mammalian transglutaminase substrate properties of Candida albicans Hwp1. Science 283: 1535–1538.
  32. 32. Zhao R, Daniels KJ, Lockhart SR, Yeater KM, Hoyer LL, et al. (2005) Unique aspects of gene expression during Candida albicans mating and possible G(1) dependency. Eukaryot Cell 4: 1175–1190.
  33. 33. Bennett RJ, Uhl MA, Miller MG, Johnson AD (2003) Identification and characterization of a Candida albicans mating pheromone. Mol Cell Biol 23: 8189–8201.
  34. 34. Fonzi WA, Irwin MY (1993) Isogenic strain construction and gene mapping in Candida albicans. Genetics 134: 717–728.
  35. 35. Birse CE, Irwin MY, Fonzi WA, Sypherd PS (1993) Cloning and characterization of ECE1, a gene expressed in association with cell elongation of the dimorphic pathogen Candida albicans. Infect Immun 61: 3648–3655.
  36. 36. Liu H, Kohler J, Fink GR (1994) Suppression of hyphal formation in Candida albicans by mutation of a STE12 homolog. Science 266: 1723–1726.
  37. 37. Wilson RB, Davis D, Mitchell AP (1999) Rapid hypothesis testing with Candida albicans through gene disruption with short homology regions. J Bacteriol 181: 1868–1874.
  38. 38. Sanchez AA, Johnston DA, Myers C, Edwards JE Jr, Mitchell AP, et al. (2004) Relationship between Candida albicans virulence during experimental hematogenously disseminated infection and endothelial cell damage in vitro. Infect Immun 72: 598–601.
  39. 39. Fu Y, Ibrahim AS, Sheppard DC, Chen YC, French SW, et al. (2002) Candida albicans Als1p: An adhesin that is a downstream effector of the EFG1 filamentation pathway. Mol Microbiol 44: 61–72.
  40. 40. Davis DA, Bruno VM, Loza L, Filler SG, Mitchell AP (2002) Candida albicans Mds3p, a conserved regulator of pH responses and virulence identified through insertional mutagenesis. Genetics 162: 1573–1581.
  41. 41. Spreghini E, Davis DA, Subaran R, Kim M, Mitchell AP (2003) Roles of Candida albicans Dfg5p and Dcw1p cell surface proteins in growth and hypha formation. Eukaryot Cell 2: 746–755.
  42. 42. Shen J, Guo W, Kohler JR (2005) CaNAT1, a heterologous dominant selectable marker for transformation of Candida albicans and other pathogenic Candida species. Infect Immun 73: 1239–1242.
  43. 43. Davis D, Wilson RB, Mitchell AP (2000) RIM101-dependent and-independent pathways govern pH responses in Candida albicans. Mol Cell Biol 20: 971–978.
  44. 44. Park H, Myers CL, Sheppard DC, Phan QT, Sanchez AA, et al. (2005) Role of the fungal Ras-protein kinase A pathway in governing epithelial cell interactions during oropharyngeal candidiasis. Cell Microbiol 7: 499–510.
  45. 45. Green CB, Cheng G, Chandra J, Mukherjee P, Ghannoum MA, et al. (2004) RT-PCR detection of Candida albicans ALS gene expression in the reconstituted human epithelium (RHE) model of oral candidiasis and in model biofilms. Microbiology 150: 267–275.