Abstract
The present study concerns the production of multiphase alloys of the Fe-Al-Si system using a powder metallurgical approach. Several compositions have been considered based on α-Fe, α′-FeAl; and α″-Fe3Al intermetallic phases. Elemental powder mixtures were compacted and sintered in a dilatometer. In this way, the dimensional changes involved with thermally induced transformations could be followed during continuous heating runs up to the sintering temperature. The effect of heating rate has been considered. The characterization of the final products was based mainly on x-ray diffraction (XRD) analyses, particularly as concerns the quantification of the crystalline phases present in the final products. Grain and porosity morphologies were characterized by scanning electron microscopy (SEM). In this way, clear indications of the reaction and densification processes occurring during the sintering treatments were obtained.
Similar content being viewed by others
References
C.G. McKamey: “Iron Aluminides,” in Physical Metallurgy and Processing of Intermetallic Compounds, N.S. Stoloff and V.K. Sikka, ed., Chapman & Hall, New York, NY, 1996, pp. 351–91.
S.L. Draper, D.J. Gaydosh, M.V. Nathal, and A.K. Misra: “Compatibility of Fe-40Al with Various Fibers,” J. Mat. Res., 1990, 5, pp. 1976–84.
K. Vedula and J.R. Stephens: “Powder Processing of Nickel and Other Aluminides by Hot Consolidation,” Progr. in Powder Metall., 1987, 43, pp. 561–73.
S. Strothers and K. Vedula: “Hot Extrusion of B2 Iron Aluminide Powders,” Progr. in Powder Metall., 1987, 43, pp. 597–610.
A. Bose, R.A. Page, W.Z. Misiolek, and R.M. German: “Reactive Sintering and Reactive Hot Isostatic Pressing of Iron Aluminides,” Adv. Powder Metall., 1991, 6, pp. 131–45.
J.A. Graves, R.R. Bowman, and J.J. Lewandowski, ed.: Intermetallic Matrix Composites III, Materials Research Society, Philadelphia, PA, 1994, 350.
D.G. Morris, D. Peguiron, M. Nazmy, and C. Noseda: “Microstructure and Mechanical Properties of an Fe-Al Alloy of Low Aluminum Content,” Mat. Sci. Eng., 1995, A191, pp. 91–104.
D.G. Morris and S. Gunther: “Order-Disorder Changes in Fe-Al Based Alloys and the Development of an Iron-Base α-α’ Superalloy,” Acta Mat., 1996, 44, pp. 2847–59.
P.R. Strutt, R.S. Polvani, and J.C. Ingram: “Creep Behavior of the Heusler Type Structure Alloy Ni2AlTi,” Met. Trans., 1976, 7A, pp. 23–31.
R.S. Polvani, W.-S. Tzeng, and P.R. Strutt: “High Temperature Creep in a Semi-Coherent NiAl-Ni2AlTi Alloy,” Met. Trans., 1976, 7A, pp. 33–40.
G. Petzow and G. Effenberg, ed.: Ternary Alloys, VCH, Weinheim, Germany, 1992, 5, pp. 394–438.
L. Lutterotti, S. Matthies, and H.R. Wenk: “MAUD: a User Friendly Java Program for Materials Analysis Using Diffraction,” Int. Union of Crystallography (IUCr) CPD Newsletter, 1999, 21, p. 14.
B.H. Rabin and R.N. Wright: “Synthesis of Iron Aluminides from Elemental Powders: Reaction Mechanisms and Densification Behavior,” Met. Trans., 1991, 22A, pp. 277–86.
B.H. Rabin and R.N. Wright: “Microstructure and Tensile Properties of Fe3Al Produced by Combustion Synthesis/Hot Isostatic Pressing,” Met. Trans., 1992, 23A, pp. 35–40.
S. Gialanella, L. Lutterotti, A. Molinari, J. Kazior, and T. Pieczonka: “Reaction-Sintering of Intermetallic Alloys of the Ni-Al-Mo System,” Intermetallics, 2000, 8, pp. 279–86.
S.-H. Lee, J.-H. Lee, Y.-H. Lee, D.H. Shin, and Y.-S. Kim: “Effect of Heating Rate on the Combustion Synthesis of Intermetallics,” Mat. Sci. Eng., 2000, A281, pp. 275–85.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gialanella, S., Camana, G., Lutterotti, L. et al. Reaction sintering of Fe-Al-Si alloys. JPE 23, 72–78 (2002). https://doi.org/10.1361/105497102770332243
Received:
Issue Date:
DOI: https://doi.org/10.1361/105497102770332243