Journal of Mining ＆ Safety Engineering. 2014, (05) Core

Simulation analysis of influence of floor weak interlayer on floor heave in deep mining roadwayChinese Full Text

SUN Lihui;JI Hongguang;YANG Bensheng;ZHANG Lei;Civil and Environmental Engineering School,University of Science and Technology Beijing;College of Resource,Hebei Technology Research Center of Coal Mine Construction Engineering,Hebei University of Engineering;

Abstract: In order to analyze the influence of floor weak interlayer on floor heave in roadway surrounding, eight models based on different position and number of weak interlayer in the floor have been constructed by combining numerical simulation with theoretical calculations. The influence of interlayer on floor heave deformation, plastic area and stress distribution law has been analyzed. The simulation results show that: 1) The volume of roadway floor heave increases gradually with the increase of interlayer number, and when there are 3 interlayers in the coal floor, the volume of roadway floor heave is 1.88 times than the volume without interlayer, while when there are the same number of interlayer, shallow part and deep interlayer have greater influence on the floor heave in deep level than middle-deep interlayer. 2) The strength of floor surrounding rock is weakened by partial shallow interlayer, which causes the increase in the tensile failure depth of floor. Unbalance energy is absorbed by middledeep and deep interlayer, so that the original rocks area form in the vicinity of the level of surrounding rock. Deep interlayer can decrease plastic area compared with shallow part interlayer. 3) The stress concentration zone decreases gradually in floor surrounding rock with increase of interlayer number and distance between interlayer and surface of roadway floor. 4) Stress uniform distribution is separated by interlayer, and stress concentration near deep interlayer, in a manner, are formed. According to the simulation results, it is concluded that the roadway with weak interlayer in the floor must be reinforced in order to control floor heave.

Keywords：

weak interlayer; roadway floor; interlayer location; interlayer number;

DOI：
10.13545/j.issn1673-3363.2014.05.005
Series：
Subject：
Classification Code：
TD32

Mobile Reading

Read on your phone instantly

Step 1
Scan QR Codes

"Mobile CNKI-CNKI Express" App

Step 2
Open“CNKI Express”

and click the scan icon in the upper left corner of the homepage.

Step 3
Scan QR Codes

Read this article on your phone.
HTML
CAJ Download
PDF Download

Contents

Simulation analysis of influence of floor weak interlayer on floor heave in deep mining roadwayChinese Full Text

SUN Lihui;JI Hongguang;YANG Bensheng;ZHANG Lei;Civil and Environmental Engineering School,University of Science and Technology Beijing;College of Resource,Hebei Technology Research Center of Coal Mine Construction Engineering,Hebei University of Engineering;

Read on your phone instantly

Citation Network

Related Literature