DESIGN OF HYDROKINETIC ENERGY GENERATION SYSTEM
Abstract
Along with technological developments and increasing population, people are in need of more energy sources. This need has led researchers to go towards new energy generation methods. One of these methods is hydrokinetic energy generation, which has been studied intensively in recent years. In this study, complete design of a hydrokinetic turbine that converts kinetic energy into mechanical and electrical energy with the most efficiency using tidal water is proposed. Moreover, an undershot water wheel system is designed to gain the least dissipationless conversion of kinetic energy. The design of the hydrokinetic energy generation system is developed considering the environmental and maintenance factors, maximum efficiency and buoyancy. Calculation for the velocity of the turbine is made by using Betz’s law, usually used for wind energy conversion systems. Conversion of obtained mechanical energy from the turbine to electrical energy is supplied by using a proper alternator system.References
Anyi, M., & Kirke, B. (2011). Hydrokinetic turbine blades: design and local construction techniques for remote communities. Energy for Sustainable Development, 15, 223-230.
Behrouzi, F., Maimun, A., & Nakisa, M. (2014). Review of various designs and development in hydropower turbines. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 8(2), ?.
Betz, A. (1966). Introduction to the theory of flow machines. (D. G. Randall, Trans.). Oxford: Pergamon Press.
Denny, M. (2003). The efficiency of overshot and undershot waterwheels. Eur. J. Phys, 25(2004), 193-202.
Lopes, J. J. A, Vaz, J. R. P, Mesquita, A. L. A, Mesquita, A. L. A, & Blanco, C. J. C. (2015). An approach for the dynamic behavior of hydrokinetic turbines. ICAE2015 Energy Procedia, 75, 271-276.
Nishi, Y., Inagaki, T., Li, Y., Omiya, R., & Fukutomi, J. (2014). Study on an undershot cross-flow water turbine. Journal of Thermal Science, 23(3), 239-245.
Nishi, Y., Inagaki, T., Li, Y., & Hatano, K. (2015). Study on an undershot cross-flow water turbine with straight blades. International Journal of Rotating Machinery, 2015, Article ID 817926.
Ortega-Achury, S. L., McAnally, W. H., Davis, T. E., & Martin, J. L. (2010) Hydrokinetic power review.
Sahim, K., Ihtisan, K., Santoso, D., & Sipahutar, R. (2014). Experimental study of Darrieus-Savonius water turbine with deflector: effect of deflector on the performance. International Journal of Rotating Machinery, 2014, Article ID 203108.
Verma, A. K., Garg, N., & Rajput, T. S. (2015). Efficiency improvement techniques of hydrokinetic turbines: a review. International Journal of Emerging Technology and Advanced Engineering, 5(6), ?.
Yuce, M. I., & Muratoglu, A. (2014). Hydrokinetic energy conversion systems: a technology status review. Renewable and Sustainable Energy Reviews, 43, 72-82.
Copyright information
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (Creative Commons Attribution License 3.0 - CC BY 3.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
info@iseic.cz, www.iseic.cz, ojs.journals.cz