CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
基于挤出沉积技术的发射药3D打印机设计及制备
作者:
作者单位:

南京理工大学化工学院, 江苏 南京 210094

作者简介:

通讯作者:

基金项目:


Design and Preparation of Propellant 3D Printer Based on Extrusion Deposition Technology
Author:
Affiliation:

School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    以挤出沉积技术为核心、针对发射药黏度高、不能高温加热的性质,设计了发射药挤出沉积快速成型系统,并搭建了完整样机。以硝化棉为主的某ZY发射药为原料,制备出27.3%、33.3%、38.5%、42.9%、46.7%、50%等不同浓度物料,通过3D打印挤出实验,发现针头内径与物料浓度之间存在多项式函数关系,确定了填充速度范围为2~4 mm·s-1、填充率范围为70%~90%、底板温度范围为25~45 ℃;在此基础上,使用发射药3D打印机打印发射药,并进行压缩实验,结果表明发射药压缩强度最高可达为230 MPa。

    Abstract:

    With extrusion deposition technology as the core, based on the features of high viscosity and no-resistant to high temperature for propellant, the extrusion deposition rapid prototyping system for propellant was designed and a complete prototype was built. Using a certain ZY propellant as raw material, different materials with concentrations of 27.3%, 33.3%, 38.5%, 42.9%, 46.7% and 50% were prepared. Through 3D printing extrusion experiments, it is found that there is a polynomial function relationship between the inner diameter of the needle and the material concentration. The filling speed range is 2-4 mm·s-1, the filling rate range is 70%-90%, and the temperature range of the bottom plate is 25-45 ℃. On this basis, the propellant 3D printer was used to print the propellant, and the compression test was carried out. The results showed that the compression strength of the propellant could reach up to 230 MPa.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

周梦蕾,南风强,何卫东,等.基于挤出沉积技术的发射药3D打印机设计及制备[J].含能材料, 2021, 29(6):530-534. DOI:10.11943/CJEM2020202.
ZHOU Meng-lei, NAN Feng-qiang, HE Wei-dong, et al. Design and Preparation of Propellant 3D Printer Based on Extrusion Deposition Technology[J]. Chinese Journal of Energetic Materials, 2021, 29(6):530-534. DOI:10.11943/CJEM2020202.

复制
历史
  • 收稿日期: 2020-07-28
  • 最后修改日期: 2021-04-12
  • 录用日期: 2021-03-25
  • 在线发布日期: 2021-03-30
  • 出版日期: 2021-06-25