• Top
• Abstract
• Background
• Implementation
• Results and discussion
• Conclusion
• Availability and requirements
• List of Abbre...
• Authors' contributions
• References

Software

Array-A-Lizer: A serial DNA microarray quality analyzer

Andreas Petri , Jan Fleckner and Mads Wichmann Matthiessen

Department of Molecular Genetics, Novo Nordisk A/S, Bagsværd, 2880, Denmark

author email corresponding author email

BMC Bioinformatics 2004, 5:12doi:10.1186/1471-2105-5-12

The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1471-2105/5/12

Received:	15 October 2003
Accepted:	9 February 2004
Published:	9 February 2004

© 2004 Petri et al; licensee BioMed Central Ltd. This is an Open Access article: verbatim copying and redistribution of this article are permitted in all media for any purpose, provided this notice is preserved along with the article's original URL.

Abstract

Background

The proliferate nature of DNA microarray results have made it necessary to implement a uniform and quick quality control of experimental results to ensure the consistency of data across multiple experiments prior to actual data analysis.

Results

Array-A-Lizer is a small and convenient stand-alone tool providing the necessary initial analysis of hybridization quality of an unlimited number of microarray experiments. The experiments are analyzed for even hybridization across the slide and between fluorescent dyes in two-color experiments in spotted DNA microarrays.

Conclusions

Array-A-Lizer allows the expedient determination of the quality of multiple DNA microarray experiments allowing for a rapid initial screening of results before progressing to further data analysis. Array-A-Lizer is directed towards speed and ease-of-use allowing both the expert and non-expert microarray researcher to rapidly assess the quality of multiple microarray hybridizations. Array-A-Lizer is available from the Internet as both source code and as a binary installation package.

Background

The ongoing development of DNA microarray analysis equipment have diminished both the price and workload associated with microarray experiments leading to development of data at a tremendous rate. It is not unusual for a group of researchers to be able to produce and scan 50–100 microarray slides per week. The processing of such large amounts of experimental data, first requires verification of the overall quality of the experiments. Array-A-Lizer employs two tests to monitor the quality of the hybridization with respect to uniformity across the slide as well as relative intensity of the fluorescent dyes in two color experiments: 1) spectrum analysis of the signal across the microarray slide and 2) comparison of the two dyes that are used in two-color experiments (for instance Cy3 and Cy5).

Implementation

The Array-A-Lizer graphical user interface (GUI) is created in Borland Delphi and the statistical calculations are carried out in the R-project statistical scripting language [1]. Array-A-Lizer includes a microdistribution of the R-project and contains options for specifying the graphical output type as either bitmaps or postscript. Array-A-Lizer supports experiment files from GenePixPro and Spotfinder through an open architecture, which can be extended to include other file formats. Array-A-Lizer runs on the Microsoft Windows platform.

Results and discussion

Array-A-Lizer is an application for rapid quality control of large DNA microarray experiments. The program consists of a collection of scripts, that are contained and accessed through a GUI to ease their use (figure 1). The main advantage of the program is the rapid processing of an unlimited number of experiments. Array-A-Lizer generates reports with a graphical analysis of each experiment, providing the researcher with a rapid survey of the quality of experiments (figures 2 and 3). Additionally, the program returns an overview of the results in the system browser with hyperlinks to each analysis report (figure 4).

Array-A-Lizer facilitates the generation of several plots that detail the quality of the experiments. Two different analysis modes can be chosen, resulting in either a set of diagnostic plots or a spatial representation of the data.

In comparison to existing analysis packages, Array-A-Lizer is both quick and easy to use. It is a stand-alone application that can be installed on any desktop computer running MS Windows. It is intended for easy visualization of microarray data allowing both the expert and non-expert microarray researcher to assess the quality of multiple microarray hybridizations.

Diagnostic report

In this mode, the experimental data are used to generate several diagnostic plots (figure 2) as well as statistics on the identified spots. The Array-A-Lizer diagnostic report includes both MvA plots (figure 2A left)[2] and red/green-scatter plots (figure 2A right), both of which show spot intensities after local background subtraction.

MvA plots display the log intensity ratio M = log₂(R/G) versus the mean log intensity . This plot type is widely use to visualize array data because it directly displays the red to green ratios, which are often the quantities of interest in most experiments. Furthermore, MvA plots make it easy to identify intensity dependent biases in the data (i.e. curvature or 'banana shape'). In scatter plots, the intensities from the green channel are plotted against the red channel after log₂ transformation. Genes displaying difference in signal intensities in the two channels are plotted off the diagonal and genes showing similar intensities are plotted close to the the diagonal.

A common source of variation in microarray data acquisition is attributed by incorrectly balanced photomultiplier tube (PMT) settings during scanning. This results in overall differences in signal intensities obtained from either channel and a shift of the data from the x-axis (M = 0) or the diagonal (red = green) of the ideal MvA and scatter-plot respectively (figure 2B).

Finally, the diagnostic analysis generates histograms of the log₂ transformed data for comparison of the distribution of intensities between the two channels. The histograms display the signal intensities across the slide (figure 2C). Overamplified channels (PMT levels are set too high) will result in many saturated spots, which is revealed as an over representation of high intensity values (figure 2D).

The diagnostic report includes information on which files were used for the analysis, the number of saturated spots, and the number of negative values, i.e. the number of spots where the background intensity was higher than the foreground intensity.

Spatial report

The spatial analysis results in a graphical representation of microarray data according to the location on the slide (figure 3). From each channel, three different plots are generated showing the log₂ transformed foreground intensities, the background intensities, and a plot showing the location of negative values (background higher than foreground). This analysis method can be used to identify spatial effects on the hybridized arrays such as fading or illumination at the edges due to cover-slip effects (figure 3A and 3B) or scratches and artifacts resulting from inadequate washing of slides (figure 3C and 3D).

The cut-off values on the background plot can be set from the GUI prior to starting the analysis. Keeping these limits fixed will allow easy detection of pronounced fluctuations in background intensities both between and within slides.

Conclusion

With the reduced cost and labor of DNA microarray experiments, it is important that the inherent high through-put nature of the technology does not lower the quality of data and it is therefore vital that the control of experimental variability is consistently monitored, so the quality of subsequent data analysis is not severely weakened by the infusion of low quality data. Initial quality control is necessary and Array-A-Lizer delivers an easy-to-use application for rapid determination of experiment quality.

Availability and requirements

Project name: Array-A-Lizer

Project home page: http://www.bioinformatics.org/arrayalizer webcite

Operating system: MS Windows

Programming language: Delphi and R

License: GNU GPL

Any restrictions to use by non-academics: None

List of Abbreviations

GNU: GNU's Not Unix

GPL: General public license

GUI: Graphical user interface

PMT: Photomultiplier tube

Authors' contributions

AP and MWM conceived of the project and contributed equally to the work presented in this manuscript. JF supervised the project and provided the funding. All authors read and approved the manuscript.

References

1. Ripley BD: The R project in statistical computing.

   MSOR Connections. The newsletter of the LTSN Maths, Stats & OR Network 2001, 1(1):23-25.

2. Yang HV, Dudoit S, Luu P, Lin DM, Peng V, Ngai J, Speed TP: Normalization for cdna microarray data: a robust composite method addressing single and multiple slide systematic variation.

   Nucl Acids Res 2002, 30:e15. PubMed Abstract | Publisher Full Text

Have something to say? Post a comment on this article!