Assessment of the Association between In Vivo Corneal Morphogeometrical Changes and Keratoconus Eyes with Severe Visual Limitation

Velázquez, J. S.; Cavas, F.; Alió del Barrio, J.; Fernández-Pacheco, D. G.; Alió, J.

doi:https://doi.org/10.1155/2019/8731626

Journal of Ophthalmology

On this page

Abstract Introduction Materials and Methods Results Discussion Data Availability Conflicts of Interest Acknowledgments References Copyright Related Articles

Special Issue

Personalized Optical Designs and Manipulating Optics: Applications on the Anterior Segment of the Eye

View this Special Issue

Research Article | Open Access

Volume 2019 | Article ID 8731626 | https://doi.org/10.1155/2019/8731626

Assessment of the Association between In Vivo Corneal Morphogeometrical Changes and Keratoconus Eyes with Severe Visual Limitation

J. S. Velázquez,¹F. Cavas,¹J. Alió del Barrio,^2,3D. G. Fernández-Pacheco,¹and J. Alió^2,3

Academic Editor: Biju B. Thomas

Received18 Jun 2019

Revised06 Aug 2019

Accepted23 Aug 2019

Published22 Sept 2019

Abstract

Assessing changes suffered by the cornea as keratoconus progresses has proven to be vital for this disease diagnosis and treatment. This study determines the corneal biometric profile in eyes considered as affected by keratoconus (KC) showing severe visual limitation, by means of in vivo 3D modelling techniques. This observational case series study evaluated new objective indices in 50 healthy and 30 KC corneas, following a validated protocol created by our research group, which has been previously used for diagnosis and characterization of KC in asymptomatic (preclinical) and mild visually impaired eyes. Results show a statistically significant reduction of corneal volume and an increase of total corneal area in the severe KC group, being anterior and posterior corneal surfaces minimum thickness points the best correlated parameters, although with no discrimination between groups. Receiving operator curves were used to determine sensitivity and specificity of selected indices, being anterior and posterior apex deviations the ones which reached the highest area under the curve, both with very high sensitivity (96.7% and 90%, respectively) and specificity (94.0% and 99.9%, respectively). The results suggest that once severe visual loss appears, anterior corneal topography should be considered for a more accurate diagnosis of clinical KC, being anterior apex deviation the key metric discriminant. This study can be a useful tool for KC classification, helping doctors in diagnosing severe cases of the disease, and can help to characterize corneal changes that appear when severe KC is developed and how they relate with vision deterioration.

1. Introduction

Keratoconus (KC) is a bilateral noninflammatory corneal ectasia with a prevalence of 54.5 per 100,000, which is characterized by a stromal thinning that makes the cornea acquire a conical shape, leading to mild to marked visual impairment [1].

The geometric decompensation that causes the conical shape is localized mainly in the temporal lower quadrant of the mean peripheral region [2] due to a loss of tenacity that the corneal structure suffer by a reorientation of its anatomophysiology [3]. In addition, this morphologic decompensation inducts an increase of the high-order optical aberrations [4], showing the patients high values of irregular astigmatism and presenting as their main refractive sign the impossibility of a complete optical compensation of their ametropia by spherocylindrical lenses. Consequently, their corrected visual acuity will be diminished with respect to patients without corneal pathology [5].

There are many classifications in the scientific literature about the degree of severity of keratoconus [6]; however, it is difficult in clinical practice to handle the multiple indices in which these classifications are based, for a proper evaluation of the disease progression. Also, some of these classifications present some singularities, such as Keratoconus Severity Scores [2], which does not consider pachymetry, or the Amsler–Krumeich classification, which does not take into account that patients, depending on their manifest refraction, may show important refractive fluctuations caused by the corneal multifocality that generates the corneal shape [6]. Besides that, from an optical point of view, patients show a certainly deteriorated spectacle-corrected visual acuity during the disease development, in a way that their visual performance worsens with the progression of the severity degree of keratoconus. Following this criterion, a classification of the stages of the disease has been developed [5, 7], depending on the corrected distance visual acuity (CDVA).

Furthermore, our research group has developed a three-dimensional (3D) virtual model of the cornea by means of computational geometry [8]. These models have been validated for the diagnosis of keratoconus basing on geometric parameters of volume [9], to predict the response to refractive surgeries [10, 11] or the response to the intrastromal ring segment implantation in corneas with keratoconus [12], to analyse nonsurgical corneal modifications, such as applanation tonometry for intraocular pressure measurement [13], or to analyse the behaviour of corneal tissue properties in different scenarios [14]. However, to our knowledge the virtual model has not been used to define the biometric profile in keratoconus eyes with severe visual limitation.

Therefore, developing and validating new methods for the characterization of the changes suffered by the cornea in severe KC cases is important to help attaining a better clinical management of it and avoiding the possibility of irreversible vision losses. Thus, the purpose of this work is to evaluate the potential value of a virtual 3D model for the diagnostic of corneas affected by severe KC, conceiving cornea as a 3D refractive structure. To do so, we have based on the characterization of its biometric profile (Figure 1) by means of morpho-biometric indices that register the optic-geometric decompensation that takes place during this phase of the disease, as well as we have quantified the existence of correlations between these indices.

2. Materials and Methods

2.1. Participants

This observational case series study evaluated 80 corneas of 80 patients (selected at random to avoid interference) structured in two groups: a normal group (healthy corneas), which included 50 subjects presenting no ocular pathology (37.79 ± 14.76 years), and a second group, composed of 30 patients diagnosed with severe KC (31.63 ± 7.39 years). The classification protocol for normal or severe KC cases was run according to reported state of the art clinical and topographic evaluations [15]. Just one eye of each patient was selected at random, according to a software-generated dichotomic random number sequence (0,1), seeking to elude any possible correlation that might exist between both eyes of the same patient [9].

All patients were selected according to the RETICS grading [7]. To be included in the study, patients should have been diagnosed as Grade IV keratoconus (severe visual limitation, 0.2 < CDVA ≤ 0.4 in decimal scale or 6/30 < CDVA ≤ 6/15 in Snellen chart), focal central/paracentral steepening and corneal thinning visible in corneal tomography, 3 mm (inferior-superior) I-S mean keratometric difference >1.5 D, and asymmetric bow tie with or without skewed radial axes over 21 degrees. Patients who had undergone any previous ocular surgical procedure, suffering from any irritation of the ocular surface, with signs of significant dry eye, or who wore contact lenses in the precedent four weeks to their first visit were excluded from the study [16].

Vissum Instituto Oftalmologico, Alicante, Spain (Vissum), was the place in which these evaluations took place where the patients were satisfactorily informed about the study and signed freely their will to participate. The study was endorsed by the hospital’s Clinical Research Ethics Committee, according to the ethical guidelines dictated in the Declaration of Helsinki (Seventh revision, October 2013, Fortaleza, Brazil).

The data used for this investigation were included in the official database “Iberia” of keratoconus cases created for the purpose of multicentre study of keratoconus in the National Network for Clinical Research in Ophthalmology RETICS-OFTARED.

2.2. Examination Protocol

All subjects selected for this study were examined using Sirius System® (CSO, Florence, Italy), and following a validated protocol previously created by our research group, which has been thoroughly described in preceding studies [8, 9]. This protocol comprises two stages: first, a 3D virtual modelling and then geometric characterization (Figure 2), and it has proved itself successful when used for diagnosis and characterization of KC in asymptomatic (preclinical) and mild visually impaired eyes [17, 18].

The final output of this protocol after its application, is a patient-specific 3D virtual model of the cornea, which is then analysed to find several morpho-biometric indices (Figure 2). These indices studied herein, along with their characteristics, have been previously described in [19] and are summarized in Table 1, but are used for the first time to study KC eyes with severe visual impairment. In this work, the surface finally generated with Rhinoceros software was distorted looking for the minimisation of the nominal distance between the points in the space and the surface itself. This distance was ultimately estimated by the software, showing a mean value for its error of 4.370 × 10⁻¹⁶ ± 3.67 × 10⁻¹⁶ mm (mean ± standard deviation).

2.3. Statistical Analysis

Both Kolmogorov–Smirnov test and Shapiro–Wilk test were run to check data normality. According to these tests and thereafter, a Student’s t-test was used for normally distributed samples, while Mann –Whitney–Wilcoxon U test was chosen for not-normally distributed ones. Correlation between parameters was assessed by means of Pearson coefficient (for normally distributed data) or Spearman’s coefficient (not normally distributed). A significance level of 0.05 was fixed for -values in all statistical tests. Receiver operating characteristic (ROC) curves were used to determine which parameters could be useful in terms of characterization of diseased corneas, and optimal cutoffs were established using Youden’s J index, basing on sensitivity and specificity values [20, 21]. Graphpad Prism V 6 (GraphPad Software, La Jolla, USA) and IBM SPSS V 23.0 software (SPSS, Chicago, USA) were used to make all the analyses.

3. Results

Most of the modelled morpho-biometric indices showed statistically significant differences when comparing healthy and severe KC corneas, as shown in Table 2 below.

3.1. ROC Analysis

The predictive value of the modelled indices was established by an ROC analysis (Figure 3). Five morpho-biometric indices were identified with an area under the ROC (AUROC) above 0.85 (Table 3).

Table 4 summarizes all significant correlations between the modelled biometric parameters for the severe KC group. Correlation coefficients between parameters for the normal group have not been included, as their mutual relations have already been addressed in a previous study [18].

4. Discussion

From a visual point of view, patients of keratoconus disease show a deteriorated spectacle-corrected visual acuity, in such a way that when the disease progresses towards a higher degree of severity, the visual performance of patients gets worse. Thus, it is of great interest evaluating in a jointly manner both the geometric decompensation that takes place in corneal structure due to its structural weakening and the level of visual limitation that patients show during the disease progression. In this work, we analysed the biometric profile of the cornea conceived as a 3D refractive structure for advanced degrees of keratoconus, whose patients present a severe degree of visual limitation, according to the RETICS classification [7].

The volumetric morpho-biometric indices showed a statistically significant reduced total corneal volume in the severe KC group when compared with the healthy eyes group, which is in line with the corneal thinning described by some authors as the disease progresses [16, 22, 23] due to a loss of tenacity in the corneal structure [13, 24]. These results are consistent with the ones reported by previous studies, which have evaluated the same anatomic index with devices based on Scheimpflug technology [23, 25] and similar to the ones reported in previous studies for advanced degrees of keratoconus [9]. Also, some significant positive correlations between corneal volume and sagittal plane apex area of the posterior surface (R² = 0.919, ), and with sagittal plane area at minimum thickness point (R² = 0.931, ) were found, so that when the volume diminishes by the loss of structural resistance that takes place for the progression of the disease, the sagittal areas (Splarea_papex/Splarea_minthk) also diminish as the corneal curvature increases. This agrees with the findings of significant lower volumes associated with pachymetric reductions in grade II and higher keratoconus eyes [23].

In addition, regarding the morpho-biometric indices of the anterior and posterior surface areas, these present a statistically significant augmentation, being the greater the area of the posterior surface than the one of the anterior surface, which can be explained by the tendency of the cornea to retain a conical-shaped architecture in the advanced stages of the disease, in which the relation between both surfaces is modified by a higher increase of the posterior surface curvature than the one in the anterior surface, motivated by the biomechanical weakening that cornea manifests for a reorientation of its anatomophysiology [26]. A tendency in this line of structural weakening has been reported in previous studies [13, 26, 27]. Vega-Estrada et al. [7] observed a significant increase in dioptric power of the posterior corneal surface with respect to the anterior in advanced phases of the disease. According to these findings, corneal multifocality that produces the conical shape that locally acquires corneal surface, drives to a worsening in patient’s visual performance. Besides, anterior, posterior, and total corneal surface areas show a strong positive correlation between them, and their values increase in the severe KC group, which can be explained by the fact that structural weakening caused by the presence of fewer collagen fibres in each lamella leads to a severe local protrusion that increases the corneal surface [2] by the effect of the intraocular pressure over a structurally weakened biomechanical architecture. These results are coincident with the ones presented in other studies [16, 22, 28].

The anterior and posterior corneal surface minimum thickness point deviations show the strongest correlation between them (R² = 0.995, ). However, these are the only parameters that show no statistical difference for group discrimination ( and , respectively). This addresses the relationship between both corneal surface curvatures for keratoconus eyes, as it has already been made in previous studies for both diseased and normal eyes [16, 28], but also that in the case of severe visual limitation, this deviation varies so greatly among individuals that discrimination is impossible.

Anterior apex deviation and posterior apex deviation increase for the severe KC group. This displacement of the optical axis has been described as one of the signs of the later stages of the disease [1]. This is in concordance with some authors’ findings [23] that suggest a strong correlation between apex deviation and pachymetric progression index of the front and back elevations with CDVA of the analysed patients. Also, posterior apex deviation presents an important variability with respect to the anterior apex deviation, this is motivated by the tendency of the aspheric profile to reproduce the cornea’s physiologic prolatism in advanced phases of the disease [16, 28]. It can even be observed a paraboloid type geometry in virtual 3D models, a fact that can be relevant to explain the asymmetry that shows the posterior corneal surface in advanced keratoconus. This variability has been reported in previous studies [15, 29, 30], being this one the first in which posterior surface asymmetry is quantified for keratoconus eyes with severe visual limitation. Besides, this geometric tendency is correlated with the increase of optical aberrations in advanced degrees of keratoconus [5, 22, 31].

Results also suggest a strong correlation between centre of mass Z and anterior, posterior, and total corneal surfaces (R² = 0.925, ; R² = 0.874, ; R² = 0.873, , respectively) as well as a displacement of the centre of mass along the Z-positive axis, which is logical, as the loss of corneal volume that steeps the surfaces, should also force the centre of mass to move towards the protrusion, as a consequence of the corresponding displacement of both apex points in the Z-coordinate. This is in line with the findings of some authors [32, 33], which found that the mean maximum anterior and posterior corneal elevations were higher in eyes with subclinical or clinical keratoconus.

Regarding the ROC analysis, the anterior apex deviation reached the highest area under the curve (AUC, 0.977) with very high sensitivity (96.7%) and specificity (94.0%) due to the fact that the apex is the maximum curvature point of the corneal surface. Moreover, the posterior apex deviation also shows high discrimination capability (AUC, 0.948) with very good sensitivity (90%) and excellent specificity (99.9%). Anterior and posterior corneal surfaces and centre of mass show high AUC, but although their specificity is high, their sensitivity is not as good as the one for the deviation of the apices.

In conclusion, the analysis of corneal biometric parameters using patient-specific 3D modelling has ascertained statistically significant differences between normal and KC eyes with severe visual limitation. This computer-assisted custom approach has determined several indices that successfully characterize the profile of keratoconic eyes affected by severe visual limitation. Therefore, this analysis has proven to be a useful tool for KC classification, helping doctors to achieve reliable diagnoses in severe cases of the disease, as well as it has helped to better characterize corneal changes that take place when severe KC is developed and how they relate with vision deterioration.

Data Availability

The data used to support the findings of this study were supplied by “Iberia” under license and so cannot be made freely available. Requests for access to these data should be made to Dr. Jorge Alió, [email protected], National Network for Clinical Research in Ophthalmology RETICS-OFTARED.

Conflicts of Interest

The authors have no conflicts of interest to declare.

Acknowledgments

This publication has been carried out in the framework of the Thematic Network for Cooperative Research in Health (RETICS) reference number RD16/0008/0012 financed by the Carlos III Health Institute-General Subdirection of Networks and Cooperative Investigation Centers (R&D&I National Plan 2013–2016) and the European Regional Development Fund (FEDER).

References

Y. S. Rabinowitz, “Keratoconus,” Survey of Ophthalmology, vol. 42, no. 4, pp. 297–319, 1998.
View at: Publisher Site | Google Scholar
F. Cavas-Martínez, E. De la Cruz Sánchez, J. N. Martínez, F. F. Cañavate, and D. Fernández-Pacheco, “Corneal topography in keratoconus: state of the art,” Eye and Vision, vol. 3, no. 1, 2016.
View at: Publisher Site | Google Scholar
J. W. Ruberti, A. Sinha Roy, and C. J. Roberts, “Corneal biomechanics and biomaterials,” Annual Review of Biomedical Engineering, vol. 13, no. 1, pp. 269–295, 2011.
View at: Publisher Site | Google Scholar
A. C. Ferdi, V. Nguyen, D. M. Gore, B. D. Allan, J. J. Rozema, and S. L. Watson, “Keratoconus natural progression,” Ophthalmology, vol. 126, no. 7, pp. 935–945, 2019.
View at: Publisher Site | Google Scholar
J. L. Alió, D. P. Piñero, A. Alesón et al., “Keratoconus-integrated characterization considering anterior corneal aberrations, internal astigmatism, and corneal biomechanics,” Journal of Cataract & Refractive Surgery, vol. 37, no. 3, pp. 552–568, 2011.
View at: Publisher Site | Google Scholar
A. Martínez-Abad and D. P. Piñero, “New perspectives on the detection and progression of keratoconus,” Journal of Cataract & Refractive Surgery, vol. 43, no. 9, pp. 1213–1227, 2017.
View at: Publisher Site | Google Scholar
A. Vega-Estrada, J. L. Alio, L. F. Brenner et al., “Outcome analysis of intracorneal ring segments for the treatment of keratoconus based on visual, refractive, and aberrometric impairment,” American Journal of Ophthalmology, vol. 155, no. 3, pp. 575–584.e1, 2013.
View at: Publisher Site | Google Scholar
F. Cavas-Martínez, D. G. Fernández-Pacheco, E. De la Cruz-Sánchez et al., “Geometrical custom modeling of human cornea in vivo and its use for the diagnosis of corneal ectasia,” PLoS One, vol. 9, no. 10, Article ID e110249, 2014.
View at: Publisher Site | Google Scholar
F. Cavas-Martínez, L. Bataille, D. G. Fernández-Pacheco, F. J. F. Cañavate, and J. L. Alio, “Keratoconus detection based on a new corneal volumetric analysis,” Scientific Reports, vol. 7, no. 1, 2017.
View at: Publisher Site | Google Scholar
I. Seven, A. Vahdati, V. S. De Stefano, R. R. Krueger, and W. J. Dupps Jr., “Comparison of patient-specific computational modeling predictions and clinical outcomes of LASIK for myopia,” Investigative Opthalmology & Visual Science, vol. 57, no. 14, pp. 6287–6297, 2016.
View at: Publisher Site | Google Scholar
I. Simonini and A. Pandolfi, “Customized finite element modelling of the human cornea,” PLoS One, vol. 10, no. 6, Article ID e0130426, 2015.
View at: Publisher Site | Google Scholar
M. A. Lago, M. J. Rupérez, C. Monserrat et al., “Patient-specific simulation of the intrastromal ring segment implantation in corneas with keratoconus,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 51, pp. 260–268, 2015.
View at: Publisher Site | Google Scholar
M. Á. Ariza-Gracia, J. Zurita, D. P. Piñero, B. Calvo, and J. F. Rodríguez-Matas, “Automatized patient-specific methodology for numerical determination of biomechanical corneal response,” Annals of Biomedical Engineering, vol. 44, no. 5, pp. 1753–1772, 2016.
View at: Publisher Site | Google Scholar
I. Seven, A. S. Roy, and W. J. Dupps Jr., “Patterned corneal collagen crosslinking for astigmatism: computational modeling study,” Journal of Cataract & Refractive Surgery, vol. 40, no. 6, pp. 943–953, 2014.
View at: Publisher Site | Google Scholar
S. Huseynli, J. Salgado-Borges, and J. L. Alio, “Comparative evaluation of Scheimpflug tomography parameters between thin non-keratoconic, subclinical keratoconic, and mild keratoconic corneas,” European Journal of Ophthalmology, vol. 28, no. 5, pp. 521–534, 2018.
View at: Publisher Site | Google Scholar
R. Montalbán, J. L. Alio, J. Javaloy, and D. P. Piñero, “Comparative analysis of the relationship between anterior and posterior corneal shape analyzed by scheimpflug photography in normal and keratoconus eyes,” Graefe’s Archive for Clinical and Experimental Ophthalmology, vol. 251, no. 6, pp. 1547–1555, 2013.
View at: Publisher Site | Google Scholar
F. Cavas Martinez, D. Garcia Fernandez-Pacheco, F. J. Fernandez Cañavate et al., “Detección de queratocono temprano mediante modelado 3D personalizado Y análisis de sus parámetros geométricos,” Dyna Ingenieria E Industria, vol. 94, no. 1, pp. 175–181, 2019.
View at: Publisher Site | Google Scholar
F. Cavas-Martínez, D. Fernández-Pacheco, F. Cañavate, J. Velázquez-Blázquez, J. Bolarín, and J. Alió, “Study of morpho-geometric variables to improve the diagnosis in keratoconus with mild visual limitation,” Symmetry, vol. 10, no. 8, p. 306, 2018.
View at: Publisher Site | Google Scholar
F. Cavas-Martínez, D. G. Fernández-Pacheco, D. Parras, F. J. F. Cañavate, L. Bataille, and J. Alió, “Study and characterization of morphogeometric parameters to assist diagnosis of keratoconus,” BioMedical Engineering Online, vol. 17, no. S1, 2018.
View at: Publisher Site | Google Scholar
T. A. Lasko, J. G. Bhagwat, K. H. Zou, and L. Ohno-Machado, “The use of receiver operating characteristic curves in biomedical informatics,” Journal of Biomedical Informatics, vol. 38, no. 5, pp. 404–415, 2005.
View at: Publisher Site | Google Scholar
M. S. Pepe, The Statistical Evaluation of Medical Tests for Classification and Prediction, OUP, Oxford, UK, 2003.
H. N. Colak, F. A. Kantarci, A. Yildirim et al., “Comparison of corneal topographic measurements and high order aberrations in keratoconus and normal eyes,” Contact Lens and Anterior Eye, vol. 39, no. 5, pp. 380–384, 2016.
View at: Publisher Site | Google Scholar
D. P. Piñero, J. L. Alió, A. Alesón, M. E. Vergara, and M. Miranda, “Corneal volume, pachymetry, and correlation of anterior and posterior corneal shape in subclinical and different stages of clinical keratoconus,” Journal of Cataract & Refractive Surgery, vol. 36, no. 5, pp. 814–825, 2010.
View at: Publisher Site | Google Scholar
G. Labiris, Z. Gatzioufas, H. Sideroudi, A. Giarmoukakis, V. Kozobolis, and B. Seitz, “Biomechanical diagnosis of keratoconus: evaluation of the keratoconus match index and the keratoconus match probability,” Acta Ophthalmologica, vol. 91, no. 4, pp. e258–e262, 2013.
View at: Publisher Site | Google Scholar
S. S. Wahba, M. M. Roshdy, R. S. Elkitkat, and K. M. Naguib, “Rotating scheimpflug imaging indices in different grades of keratoconus,” Journal of Ophthalmology, vol. 2016, Article ID 6392472, 9 pages, 2016.
View at: Publisher Site | Google Scholar
C. J. Roberts and W. J. Dupps Jr., “Biomechanics of corneal ectasia and biomechanical treatments,” Journal of Cataract & Refractive Surgery, vol. 40, no. 6, pp. 991–998, 2014.
View at: Publisher Site | Google Scholar
R. Ambrósio Jr., B. T. Lopes, F. Faria-Correia et al., “Integration of scheimpflug-based corneal tomography and biomechanical assessments for enhancing ectasia detection,” Journal of Refractive Surgery, vol. 33, no. 7, pp. 434–443, 2017.
View at: Publisher Site | Google Scholar
R. Montalbán, J. L. Alio, J. Javaloy, and D. P. Piñero, “Correlation of anterior and posterior corneal shape in keratoconus,” Cornea, vol. 32, no. 7, pp. 916–921, 2013.
View at: Publisher Site | Google Scholar
M. Aghazadeh Amiri, H. Hashemi, S. Ramin et al., “Corneal thickness measurements with scheimpflug and slit scanning imaging techniques in keratoconus,” Journal of Current Ophthalmology, vol. 29, no. 1, pp. 23–27, 2017.
View at: Publisher Site | Google Scholar
G. H. Bae, J. R. Kim, C. H. Kim, D. H. Lim, E. S. Chung, and T.-Y. Chung, “Corneal topographic and tomographic analysis of fellow eyes in unilateral keratoconus patients using pentacam,” American Journal of Ophthalmology, vol. 157, no. 1, pp. 103–109.e1, 2014.
View at: Publisher Site | Google Scholar
F. Aslani, M. Khorrami-Nejad, M. A. Amiri, H. Hashemian, F. Askarizadeh, and B. Khosravi, “Characteristics of posterior corneal astigmatism in different stages of keratoconus,” Journal of Ophthalmic and Vision Research, vol. 13, no. 1, pp. 3–9, 2018.
View at: Publisher Site | Google Scholar
U. de Sanctis, C. Loiacono, L. Richiardi, D. Turco, B. Mutani, and F. M. Grignolo, “Sensitivity and specificity of posterior corneal elevation measured by pentacam in discriminating keratoconus/subclinical keratoconus,” Ophthalmology, vol. 115, no. 9, pp. 1534–1539, 2008.
View at: Publisher Site | Google Scholar
R. Ishii, K. Kamiya, A. Igarashi, K. Shimizu, Y. Utsumi, and T. Kumanomido, “Correlation of corneal elevation with severity of keratoconus by means of anterior and posterior topographic analysis,” Cornea, vol. 31, no. 3, pp. 253–258, 2012.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2019 J. S. Velázquez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

1190

Downloads

845

Citations