In the article titled “Study on the Gap Flow Simulation in EDM Small Hole Machining with Ti Alloy” [1], Dr. Wenchao Zhang was incorrectly listed as the corresponding author. The corresponding author is Dr. Yu Liu.
Corrigendum | Open Access
Corrigendum to “Study on the Gap Flow Simulation in EDM Small Hole Machining with Ti Alloy”
Received25 Sept 2017
Accepted12 Oct 2017
Published24 Oct 2017
References
S. Zhang, W. Zhang, Y. Liu, F. Ma, C. Su, and Z. Sha, “Study on the gap flow simulation in EDM small hole machining with Ti alloy,” Advances in Materials Science and Engineering, vol. 2017, Article ID 8408793, 23 pages, 2017.
View at: Publisher Site | Google Scholar
Copyright
Copyright © 2017 Shengfang Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.